*** Settings ***
-Documentation This test suite is to by-pass interface manager and create/delete the tunnels between the switches directly inorder for ITM to scale and build mesh among more number of switches.
-Suite Setup ITM Direct Tunnels Start Suite
-Suite Teardown ITM Direct Tunnels Stop Suite
-Test Setup Genius Test Setup
-Test Teardown Genius Test Teardown ${data_models}
-Library Collections
-Library OperatingSystem
-Library RequestsLibrary
-Library String
-Resource ../../libraries/ClusterManagement.robot
-Resource ../../libraries/DataModels.robot
-Resource ../../libraries/Genius.robot
-Resource ../../libraries/KarafKeywords.robot
-Resource ../../variables/netvirt/Variables.robot
-Resource ../../libraries/OVSDB.robot
-Resource ../../libraries/ToolsSystem.robot
-Resource ../../libraries/Utils.robot
-Resource ../../libraries/VpnOperations.robot
-Resource ../../variables/Variables.robot
-Variables ../../variables/genius/Modules.py
+Documentation This test suite is to by-pass interface manager and create/delete the tunnels between the switches directly inorder for ITM to scale and build mesh among more number of switches.
+
+Library Collections
+Library OperatingSystem
+Library RequestsLibrary
+Library String
+Resource ../../libraries/ClusterManagement.robot
+Resource ../../libraries/DataModels.robot
+Resource ../../libraries/Genius.robot
+Resource ../../libraries/KarafKeywords.robot
+Resource ../../variables/netvirt/Variables.robot
+Resource ../../libraries/OVSDB.robot
+Resource ../../libraries/ToolsSystem.robot
+Resource ../../libraries/Utils.robot
+Resource ../../libraries/VpnOperations.robot
+Resource ../../variables/Variables.robot
+Variables ../../variables/genius/Modules.py
+
+Suite Setup ITM Direct Tunnels Start Suite
+Suite Teardown ITM Direct Tunnels Stop Suite
+Test Setup Genius Test Setup
+Test Teardown Genius Test Teardown ${data_models}
-*** Variables ***
*** Test Cases ***
Create and Verify VTEP
[Documentation] This testcase creates a Internal Transport Manager - ITM tunnel between 2 DPNs
Genius.Create Vteps ${NO_VLAN} ${gateway_ip}
- BuiltIn.Wait Until Keyword Succeeds 40 10 Genius.Get ITM ${itm_created[0]} ${SUBNET} ${NO_VLAN}
+ BuiltIn.Wait Until Keyword Succeeds 40 10 Genius.Get ITM ${itm_created[0]}
${type} = BuiltIn.Set Variable odl-interface:tunnel-type-vxlan
Genius.Update Dpn id list and get tunnels ${type} dpn-teps-state
Genius.Verify Response Code Of Dpn Endpointconfig API
BuiltIn.Wait Until Keyword Succeeds 30 3 Genius.Verify Tunnel Status As Up
ClusterManagement.Stop_Members_From_List_Or_All
ClusterManagement.Start_Members_From_List_Or_All
- BuiltIn.Wait Until Keyword Succeeds 60 3 ClusterManagement.Check Status Of Services Is OPERATIONAL @{GENIUS_DIAG_SERVICES}
+ BuiltIn.Wait Until Keyword Succeeds
+ ... 60
+ ... 3
+ ... ClusterManagement.Check Status Of Services Is OPERATIONAL
+ ... @{GENIUS_DIAG_SERVICES}
BuiltIn.Wait Until Keyword Succeeds 30 3 Genius.Verify Tunnel Status As Up
Verify Tunnels By Enabling/Disabling BFD
[Documentation] Verify tunnel creation by enabling and disabling BFD one after another with respect to the branch in such a way default value is retained at last.
- CompareStream.Run_Keyword_If_At_Least_Neon Verify Tunnels By Enabling BFD
- CompareStream.Run_Keyword_If_At_Least_Neon Verify Tunnels By Disabling BFD
- CompareStream.Run_Keyword_If_Less_Than_Neon Verify Tunnels By Disabling BFD
- CompareStream.Run_Keyword_If_Less_Than_Neon Verify Tunnels By Enabling BFD
+ Verify Tunnels By Enabling BFD
+ Verify Tunnels By Disabling BFD
Delete and Verify VTEP
[Documentation] This Delete testcase , deletes the ITM tunnel created between 2 dpns.
${tunnel_list} = Genius.Get Tunnels List
- : FOR ${dpn_id} IN @{DPN_ID_LIST}
- \ Utils.Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/subnets/${SUBNET}%2F16/vteps/${dpn_id}/${port_name}
+ FOR ${dpn_id} IN @{DPN_ID_LIST}
+ CompareStream.Run_Keyword_If_Less_Than_Sodium
+ ... Utils.Remove All Elements At URI And Verify
+ ... ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/subnets/${SUBNET}%2F16/vteps/${dpn_id}/${port_name}
+ CompareStream.Run_Keyword_If_At_Least_Sodium
+ ... Utils.Remove All Elements At URI And Verify
+ ... ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/vteps/${dpn_id}
+ END
${output} = KarafKeywords.Issue Command On Karaf Console ${TEP_SHOW}
BuiltIn.Should Not Contain ${output} ${itm_created[0]}
Utils.Remove All Elements At URI And Verify ${CONFIG_API}/itm:transport-zones/transport-zone/${itm_created[0]}/
${resp} = Utils.Get Data From URI session ${CONFIG_API}/itm:transport-zones/
BuiltIn.Should Not Contain ${resp} ${itm_created[0]}
- BuiltIn.Wait Until Keyword Succeeds 40 10 Genius.Verify Deleted Tunnels On OVS ${tunnel_list} ${resp}
+ BuiltIn.Wait Until Keyword Succeeds
+ ... 40
+ ... 10
+ ... Genius.Verify Deleted Tunnels On OVS
+ ... ${tunnel_list}
+ ... ${resp}
BuiltIn.Wait Until Keyword Succeeds 40 10 Genius.Check Tunnel Delete On OVS ${tunnel_list}
+
*** Keywords ***
Enable_Tunnel_Monitoring
[Documentation] In this we will enable tunnel monitoring by tep:enable command running in karaf console
KarafKeywords.Issue_Command_On_Karaf_Console tep:enable-tunnel-monitor true
Verify Tunnel State After OVS Restart
- [Arguments] ${TOOLS_SYSTEM_IP}
[Documentation] In this we will Verify Tunnel State by Stopping/Starting Switch
+ [Arguments] ${TOOLS_SYSTEM_IP}
OVSDB.Stop OVS ${TOOLS_SYSTEM_IP}
BuiltIn.Wait Until Keyword Succeeds 2min 20 sec Verify Tunnel Down
OVSDB.Start OVS ${TOOLS_SYSTEM_IP}
Verify Tunnel Down
[Documentation] In this we will check whether tunnel is in down or not
- ${output}= KarafKeywords.Issue_Command_On_Karaf_Console ${TEP_SHOW_STATE}
+ ${output} = KarafKeywords.Issue_Command_On_Karaf_Console ${TEP_SHOW_STATE}
BuiltIn.Should Contain ${output} DOWN
Disable_Tunnel_Monitoring
Verify Tunnels By Enabling BFD
[Documentation] Verify tunnel creation by enabling BFD monitoring.
- ${result} = BuiltIn.Run Keyword And Return Status Genius.Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_ON}
- BuiltIn.Run Keyword If '${result}' == 'False' Enable_Tunnel_monitoring
- : FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS}
- \ Verify Tunnel State After OVS Restart ${tools_ip}
+ ${result} = BuiltIn.Run Keyword And Return Status
+ ... Genius.Verify Tunnel Monitoring Status
+ ... ${TUNNEL_MONITOR_ON}
+ IF '${result}' == 'False' Enable_Tunnel_monitoring
+ FOR ${tools_ip} IN @{TOOLS_SYSTEM_ALL_IPS}
+ Verify Tunnel State After OVS Restart ${tools_ip}
+ END
Verify Tunnels By Disabling BFD
[Documentation] Verify tunnel creation by disabling BFD monitoring.
${result} = Run Keyword And Return Status Genius.Verify Tunnel Monitoring Status ${TUNNEL_MONITOR_ON}
- BuiltIn.Run Keyword If '${result}' == 'True' Disable_Tunnel_Monitoring
+ IF '${result}' == 'True' Disable_Tunnel_Monitoring
${tunnels_on_OVS} = Genius.Get Tunnels On OVS ${TOOLS_SYSTEM_ALL_CONN_IDS[0]}
OVSDB.Stop OVS ${TOOLS_SYSTEM_IP}
- Genius.Verify Tunnel Status UNKNOWN ${tunnels_on_OVS}
+ BuiltIn.Wait Until Keyword Succeeds 10s 1s Genius.Verify Tunnel Status UNKNOWN ${tunnels_on_OVS}
OVSDB.Start OVS ${TOOLS_SYSTEM_IP}
BuiltIn.Wait Until Keyword Succeeds 10s 1s Genius.Verify Tunnel Status As Up
Code Review / integration / test.git / blobdiff