**URL:** ``/restconf/config/network-topology:network-topology/topology/pcep-topology/node/43.43.43.43``
+**RFC8040 URL:** ``/rests/data/network-topology:network-topology/topology=pcep-topology/node=43.43.43.43``
+
**Method:** ``PUT``
-**Content-Type:** ``application/xml``
+.. tabs::
+
+ .. tab:: XML
+
+ **Content-Type:** ``application/xml``
+
+ **Request Body:**
+
+ .. code-block:: xml
+ :linenos:
+ :emphasize-lines: 2,4
+
+ <node xmlns="urn:TBD:params:xml:ns:yang:network-topology">
+ <node-id>43.43.43.43</node-id>
+ <session-config xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep:config">
+ <speaker-entity-id-value xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep:sync:optimizations:config">AQIDBA==</speaker-entity-id-value>
+ </session-config>
+ </node>
+
+ @line 2: **address** - A PCC IP address.
-**Request Body:**
+ @line 4: **Speaker Entity Identifier** - The Speaker Entity identifier assigned to PCEP Node.
-.. code-block:: xml
- :linenos:
- :emphasize-lines: 2,4
+ .. tab:: JSON
+ **Content-Type:** ``application/json``
- <node xmlns="urn:TBD:params:xml:ns:yang:network-topology">
- <node-id>43.43.43.43</node-id>
- <session-config xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep:config">
- <speaker-entity-id-value xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep:sync:optimizations:config">AQIDBA==</speaker-entity-id-value>
- </session-config>
- </node>
+ **Request Body:**
-@line 2: **address** - A PCC IP address.
+ .. code-block:: json
+ :linenos:
+ :emphasize-lines: 3,5
-@line 4: **Speaker Entity Identifier** - The Speaker Entity identifier assigned to PCEP Node.
+ {
+ "node": {
+ "node-id": "43.43.43.43",
+ "topology:pcep:config:session-config": {
+ "topology:pcep:sync:optimizations:config:speaker-entity-id-value": "AQIDBA=="
+ }
+ }
+ }
+
+ @line 3: **address** - A PCC IP address.
+
+ @line 5: **Speaker Entity Identifier** - The Speaker Entity identifier assigned to PCEP Node.
MD5 authentication configuration
''''''''''''''''''''''''''''''''
**URL:** ``/restconf/config/network-topology:network-topology/topology/pcep-topology/node/43.43.43.43``
+**RFC8040 URL:** ``/rests/data/network-topology:network-topology/topology=pcep-topology/node=43.43.43.43``
+
**Method:** ``PUT``
-**Content-Type:** ``application/xml``
+.. tabs::
+
+ .. tab:: XML
+
+ **Content-Type:** ``application/xml``
+
+ **Request Body:**
+
+ .. code-block:: xml
+ :linenos:
+ :emphasize-lines: 2,4
-**Request Body:**
+ <node xmlns="urn:TBD:params:xml:ns:yang:network-topology">
+ <node-id>43.43.43.43</node-id>
+ <session-config xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep:config">
+ <password>topsecret</password>
+ </session-config>
+ </node>
-.. code-block:: xml
- :linenos:
- :emphasize-lines: 2,4
+ @line 2: **address** - A PCC IP address.
+ @line 4: **password** - MD5 authentication phrase.
- <node xmlns="urn:TBD:params:xml:ns:yang:network-topology">
- <node-id>43.43.43.43</node-id>
- <session-config xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep:config">
- <password>topsecret</password>
- </session-config>
- </node>
+ .. tab:: JSON
-@line 2: **address** - A PCC IP address.
+ **Content-Type:** ``application/json``
-@line 4: **password** - MD5 authentication phrase.
+ **Request Body:**
+
+ .. code-block:: json
+ :linenos:
+ :emphasize-lines: 3,5
+
+ {
+ "node": {
+ "node-id": "43.43.43.43",
+ "topology:pcep:config:session-config": {
+ "password": "topsecret"
+ }
+ }
+ }
+
+ @line 3: **address** - A PCC IP address.
+
+ @line 5: **password** - MD5 authentication phrase.
LSP State Database
^^^^^^^^^^^^^^^^^^
**URL:** ``/restconf/operational/network-topology:network-topology/topology/pcep-topology/node/pcc:%2F%2F43.43.43.43``
+**RFC8040 URL:** ``/rests/data/network-topology:network-topology/topology=pcep-topology/node=pcc%3A%2F%2F43.43.43.43``
+
**Method:** ``GET``
-**Response Body:**
-
-.. code-block:: xml
- :linenos:
- :emphasize-lines: 2,4,5,8,12,14,15,16,17,18,20,24,25,26,28,29,32,36
-
- <node>
- <node-id>pcc://43.43.43.43</node-id>
- <path-computation-client>
- <ip-address>43.43.43.43</ip-address>
- <state-sync>synchronized</state-sync>
- <stateful-tlv>
- <stateful>
- <lsp-update-capability>true</lsp-update-capability>
- </stateful>
- </stateful-tlv>
- <reported-lsp>
- <name>foo</name>
- <lsp>
- <operational>up</operational>
- <sync>true</sync>
- <plsp-id>1</plsp-id>
- <create>false</create>
- <administrative>true</administrative>
- <remove>false</remove>
- <delegate>true</delegate>
- <tlvs>
- <lsp-identifiers>
- <ipv4>
- <ipv4-tunnel-sender-address>43.43.43.43</ipv4-tunnel-sender-address>
- <ipv4-tunnel-endpoint-address>39.39.39.39</ipv4-tunnel-endpoint-address>
- <ipv4-extended-tunnel-id>39.39.39.39</ipv4-extended-tunnel-id>
- </ipv4>
- <tunnel-id>1</tunnel-id>
- <lsp-id>1</lsp-id>
- </lsp-identifiers>
- <symbolic-path-name>
- <path-name>Zm9v</path-name>
- </symbolic-path-name>
- </tlvs>
- </lsp>
- <ero>
- <subobject>
- <loose>false</loose>
- <ip-prefix>
- <ip-prefix>201.20.160.40/32</ip-prefix>
- </ip-prefix>
- </subobject>
- <subobject>
- <loose>false</loose>
- <ip-prefix>
- <ip-prefix>195.20.160.39/32</ip-prefix>
- </ip-prefix>
- </subobject>
- <subobject>
- <loose>false</loose>
- <ip-prefix>
- <ip-prefix>39.39.39.39/32</ip-prefix>
- </ip-prefix>
- </subobject>
- </ero>
- </reported-lsp>
- </path-computation-client>
- </node>
-
-@line 2: **node-id** The PCC identifier.
-
-@line 4: **ip-address** IP address of the PCC.
-
-@line 5: **state-sync** Synchronization status of the PCC's LSPs. The *synchronized* indicates the State Synchronization is done.
-
-@line 8: **lsp-update-capability** - Indicates that PCC allows LSP modifications.
-
-@line 12: **name** - Textual representation of LPS's name.
-
-@line 14: **operational** - Represent operational status of the LSP:
-
- * *down* - not active.
- * *up* - signaled.
- * *active* - up and carrying traffic.
- * *going-down* - LSP is being torn down, resources are being released.
- * *going-up* - LSP is being signaled.
-
-@line 15: **sync** - The flag set by PCC during LSPs State Synchronization.
-
-@line 16: **plsp-id** - A PCEP-specific identifier for the LSP. It is assigned by PCC and it is constant for a lifetime of a PCEP session.
-
-@line 17: **create** - The *false* indicates that LSP is PCC-initiated.
-
-@line 18: **administrative** - The flag indicates target operational status of the LSP.
-
-@line 20: **delegate** - The delegate flag indicates that the PCC is delegating the LSP to the PCE.
-
-@line 24: **ipv4-tunnel-sender-address** - Contains the sender node's IP address.
-
-@line 25: **ipv4-tunnel-endpoint-address** - Contains the egress node's IP address.
-
-@line 26: **ipv4-extended-tunnel-id** - The *Extended Tunnel ID* identifier.
-
-@line 28: **tunnel-id** - The *Tunnel ID* identifier.
-
-@line 29: **lsp-id** - The *LSP ID* identifier.
-
-@line 32: **path-name** - The symbolic name for the LSP.
-
-@line 36: **ero** - The *Explicit Route Object* is encoding the path of the TE LSP through the network.
+.. tabs::
+
+ .. tab:: XML
+
+ **Response Body:**
+
+ .. code-block:: xml
+ :linenos:
+ :emphasize-lines: 2,4,5,8,12,14,15,16,17,18,20,24,25,26,28,29,32,36
+
+ <node>
+ <node-id>pcc://43.43.43.43</node-id>
+ <path-computation-client>
+ <ip-address>43.43.43.43</ip-address>
+ <state-sync>synchronized</state-sync>
+ <stateful-tlv>
+ <stateful>
+ <lsp-update-capability>true</lsp-update-capability>
+ </stateful>
+ </stateful-tlv>
+ <reported-lsp>
+ <name>foo</name>
+ <lsp>
+ <operational>up</operational>
+ <sync>true</sync>
+ <plsp-id>1</plsp-id>
+ <create>false</create>
+ <administrative>true</administrative>
+ <remove>false</remove>
+ <delegate>true</delegate>
+ <tlvs>
+ <lsp-identifiers>
+ <ipv4>
+ <ipv4-tunnel-sender-address>43.43.43.43</ipv4-tunnel-sender-address>
+ <ipv4-tunnel-endpoint-address>39.39.39.39</ipv4-tunnel-endpoint-address>
+ <ipv4-extended-tunnel-id>39.39.39.39</ipv4-extended-tunnel-id>
+ </ipv4>
+ <tunnel-id>1</tunnel-id>
+ <lsp-id>1</lsp-id>
+ </lsp-identifiers>
+ <symbolic-path-name>
+ <path-name>Zm9v</path-name>
+ </symbolic-path-name>
+ </tlvs>
+ </lsp>
+ <ero>
+ <subobject>
+ <loose>false</loose>
+ <ip-prefix>
+ <ip-prefix>201.20.160.40/32</ip-prefix>
+ </ip-prefix>
+ </subobject>
+ <subobject>
+ <loose>false</loose>
+ <ip-prefix>
+ <ip-prefix>195.20.160.39/32</ip-prefix>
+ </ip-prefix>
+ </subobject>
+ <subobject>
+ <loose>false</loose>
+ <ip-prefix>
+ <ip-prefix>39.39.39.39/32</ip-prefix>
+ </ip-prefix>
+ </subobject>
+ </ero>
+ </reported-lsp>
+ </path-computation-client>
+ </node>
+
+ @line 2: **node-id** The PCC identifier.
+
+ @line 4: **ip-address** IP address of the PCC.
+
+ @line 5: **state-sync** Synchronization status of the PCC's LSPs. The *synchronized* indicates the State Synchronization is done.
+
+ @line 8: **lsp-update-capability** - Indicates that PCC allows LSP modifications.
+
+ @line 12: **name** - Textual representation of LPS's name.
+
+ @line 14: **operational** - Represent operational status of the LSP:
+
+ * *down* - not active.
+ * *up* - signaled.
+ * *active* - up and carrying traffic.
+ * *going-down* - LSP is being torn down, resources are being released.
+ * *going-up* - LSP is being signaled.
+
+ @line 15: **sync** - The flag set by PCC during LSPs State Synchronization.
+
+ @line 16: **plsp-id** - A PCEP-specific identifier for the LSP. It is assigned by PCC and it is constant for a lifetime of a PCEP session.
+
+ @line 17: **create** - The *false* indicates that LSP is PCC-initiated.
+
+ @line 18: **administrative** - The flag indicates target operational status of the LSP.
+
+ @line 20: **delegate** - The delegate flag indicates that the PCC is delegating the LSP to the PCE.
+
+ @line 24: **ipv4-tunnel-sender-address** - Contains the sender node's IP address.
+
+ @line 25: **ipv4-tunnel-endpoint-address** - Contains the egress node's IP address.
+
+ @line 26: **ipv4-extended-tunnel-id** - The *Extended Tunnel ID* identifier.
+
+ @line 28: **tunnel-id** - The *Tunnel ID* identifier.
+
+ @line 29: **lsp-id** - The *LSP ID* identifier.
+
+ @line 32: **path-name** - The symbolic name for the LSP.
+
+ @line 36: **ero** - The *Explicit Route Object* is encoding the path of the TE LSP through the network.
+
+ .. tab:: JSON
+
+ **Response Body:**
+
+ .. code-block:: json
+ :linenos:
+ :emphasize-lines: 3,5,6,9,13,15,16,17,18,19,21,25,26,27,29,30,33,37
+
+ {
+ "node": {
+ "node-id": "pcc://43.43.43.43",
+ "path-computation-client": {
+ "ip-address": "43.43.43.43",
+ "state-sync": "synchronized",
+ "stateful-tlv": {
+ "stateful": {
+ "lsp-update-capability": true
+ }
+ },
+ "reported-lsp": {
+ "name": "foo",
+ "lsp": {
+ "operational": "up",
+ "sync": true,
+ "plsp-id": 1,
+ "create": false,
+ "administrative": true,
+ "remove": false,
+ "delegate": true,
+ "tlvs": {
+ "lsp-identifiers": {
+ "ipv4": {
+ "ipv4-tunnel-sender-address": "43.43.43.43",
+ "ipv4-tunnel-endpoint-address": "39.39.39.39",
+ "ipv4-extended-tunnel-id": "39.39.39.39"
+ },
+ "tunnel-id": 1,
+ "lsp-id": 1
+ },
+ "symbolic-path-name": {
+ "path-name": "Zm9v"
+ }
+ }
+ },
+ "ero": [
+ {
+ "loose": false,
+ "ip-prefix": {
+ "ip-prefix": "201.20.160.40/32"
+ }
+ },
+ {
+ "loose": false,
+ "ip-prefix": {
+ "ip-prefix": "195.20.160.39/32"
+ }
+ },
+ {
+ "loose": false,
+ "ip-prefix": {
+ "ip-prefix": "39.39.39.39/32"
+ }
+ }
+ ]
+ }
+ }
+ }
+ }
+
+ @line 3: **node-id** The PCC identifier.
+
+ @line 5: **ip-address** IP address of the PCC.
+
+ @line 6: **state-sync** Synchronization status of the PCC's LSPs. The *synchronized* indicates the State Synchronization is done.
+
+ @line 9: **lsp-update-capability** - Indicates that PCC allows LSP modifications.
+
+ @line 13: **name** - Textual representation of LPS's name.
+
+ @line 15: **operational** - Represent operational status of the LSP:
+
+ * *down* - not active.
+ * *up* - signaled.
+ * *active* - up and carrying traffic.
+ * *going-down* - LSP is being torn down, resources are being released.
+ * *going-up* - LSP is being signaled.
+
+ @line 16: **sync** - The flag set by PCC during LSPs State Synchronization.
+
+ @line 17: **plsp-id** - A PCEP-specific identifier for the LSP. It is assigned by PCC and it is constant for a lifetime of a PCEP session.
+
+ @line 18: **create** - The *false* indicates that LSP is PCC-initiated.
+
+ @line 19: **administrative** - The flag indicates target operational status of the LSP.
+
+ @line 21: **delegate** - The delegate flag indicates that the PCC is delegating the LSP to the PCE.
+
+ @line 25: **ipv4-tunnel-sender-address** - Contains the sender node's IP address.
+
+ @line 26: **ipv4-tunnel-endpoint-address** - Contains the egress node's IP address.
+
+ @line 27: **ipv4-extended-tunnel-id** - The *Extended Tunnel ID* identifier.
+
+ @line 29: **tunnel-id** - The *Tunnel ID* identifier.
+
+ @line 30: **lsp-id** - The *LSP ID* identifier.
+
+ @line 33: **path-name** - The symbolic name for the LSP.
+
+ @line 37: **ero** - The *Explicit Route Object* is encoding the path of the TE LSP through the network.
LSP Delegation
''''''''''''''
**URL:** ``/restconf/operations/network-topology-pcep:update-lsp``
+**RFC8040 URL:** ``/rests/operations/network-topology-pcep:update-lsp``
+
**Method:** ``POST``
-**Content-Type:** ``application/xml``
+.. tabs::
+
+ .. tab:: XML
+
+ **Content-Type:** ``application/xml``
+
+ **Request Body:**
+
+ .. code-block:: xml
+ :linenos:
+ :emphasize-lines: 2,3,6,10
+
+ <input>
+ <node>pcc://43.43.43.43</node>
+ <name>foo</name>
+ <arguments>
+ <lsp xmlns:stateful="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
+ <delegate>false</delegate>
+ <administrative>true</administrative>
+ <tlvs>
+ <symbolic-path-name>
+ <path-name>Zm9v</path-name>
+ </symbolic-path-name>
+ </tlvs>
+ </lsp>
+ </arguments>
+ <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
+ </input>
+
+ @line 2: **node** The PCC identifier.
+
+ @line 3: **name** The name of the LSP.
+
+ @line 6: **delegate** - Delegation flag set *false* in order to return the LSP delegation.
+
+ @line 10: **path-name** - The Symbolic Path Name TLV must be present when sending a request to give up the delegation.
-**Request Body:**
+ .. tab:: JSON
-.. code-block:: xml
- :linenos:
- :emphasize-lines: 2,3,6,10
+ **Content-Type:** ``application/json``
- <input>
- <node>pcc://43.43.43.43</node>
- <name>foo</name>
- <arguments>
- <lsp xmlns:stateful="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
- <delegate>false</delegate>
- <administrative>true</administrative>
- <tlvs>
- <symbolic-path-name>
- <path-name>Zm9v</path-name>
- </symbolic-path-name>
- </tlvs>
- </lsp>
- </arguments>
- <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
- </input>
+ **Request Body:**
-@line 2: **node** The PCC identifier.
+ .. code-block:: json
+ :linenos:
+ :emphasize-lines: 3,4,7,11
-@line 3: **name** The name of the LSP.
+ {
+ "input": {
+ "node": "pcc://43.43.43.43",
+ "name": "foo",
+ "arguments": {
+ "lsp": {
+ "delegate": false,
+ "administrative": true,
+ "tlvs": {
+ "symbolic-path-name": {
+ "path-name": "Zm9v"
+ }
+ }
+ }
+ },
+ "network-topology-ref": "/network-topology:network-topology/network-topology:topology[network-topology:topology-id=\"pcep-topology\"]"
+ }
+ }
-@line 6: **delegate** - Delegation flag set *false* in order to return the LSP delegation.
+ @line 3: **node** The PCC identifier.
-@line 10: **path-name** - The Symbolic Path Name TLV must be present when sending a request to give up the delegation.
+ @line 4: **name** The name of the LSP.
+
+ @line 7: **delegate** - Delegation flag set *false* in order to return the LSP delegation.
+
+ @line 11: **path-name** - The Symbolic Path Name TLV must be present when sending a request to give up the delegation.
LSP Update
''''''''''
**URL:** ``/restconf/operations/network-topology-pcep:update-lsp``
+**RFC8040 URL:** ``/rests/operations/network-topology-pcep:update-lsp``
+
**Method:** ``POST``
-**Content-Type:** ``application/xml``
-
-**Request Body:**
-
-.. code-block:: xml
- :linenos:
- :emphasize-lines: 2,3,6,7,9
-
- <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
- <node>pcc://43.43.43.43</node>
- <name>foo</name>
- <arguments>
- <lsp xmlns="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
- <delegate>true</delegate>
- <administrative>true</administrative>
- </lsp>
- <ero>
- <subobject>
- <loose>false</loose>
- <ip-prefix>
- <ip-prefix>200.20.160.41/32</ip-prefix>
- </ip-prefix>
- </subobject>
- <subobject>
- <loose>false</loose>
- <ip-prefix>
- <ip-prefix>196.20.160.39/32</ip-prefix>
- </ip-prefix>
- </subobject>
- <subobject>
- <loose>false</loose>
- <ip-prefix>
- <ip-prefix>39.39.39.39/32</ip-prefix>
- </ip-prefix>
- </subobject>
- </ero>
- </arguments>
- <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
- </input>
-
-@line 2: **node** The PCC identifier.
-
-@line 3: **name** The name of the LSP to be updated.
-
-@line 6: **delegate** - Delegation flag set *true* in order to keep the LSP control.
-
-@line 7: **administrative** - Desired administrative status of the LSP is active.
-
-@line 9: **ero** - This LSP attribute is changed.
+.. tabs::
+
+ .. tab:: XML
+
+ **Content-Type:** ``application/xml``
+
+ **Request Body:**
+
+ .. code-block:: xml
+ :linenos:
+ :emphasize-lines: 2,3,6,7,9
+
+ <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
+ <node>pcc://43.43.43.43</node>
+ <name>foo</name>
+ <arguments>
+ <lsp xmlns="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
+ <delegate>true</delegate>
+ <administrative>true</administrative>
+ </lsp>
+ <ero>
+ <subobject>
+ <loose>false</loose>
+ <ip-prefix>
+ <ip-prefix>200.20.160.41/32</ip-prefix>
+ </ip-prefix>
+ </subobject>
+ <subobject>
+ <loose>false</loose>
+ <ip-prefix>
+ <ip-prefix>196.20.160.39/32</ip-prefix>
+ </ip-prefix>
+ </subobject>
+ <subobject>
+ <loose>false</loose>
+ <ip-prefix>
+ <ip-prefix>39.39.39.39/32</ip-prefix>
+ </ip-prefix>
+ </subobject>
+ </ero>
+ </arguments>
+ <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
+ </input>
+
+ @line 2: **node** The PCC identifier.
+
+ @line 3: **name** The name of the LSP to be updated.
+
+ @line 6: **delegate** - Delegation flag set *true* in order to keep the LSP control.
+
+ @line 7: **administrative** - Desired administrative status of the LSP is active.
+
+ @line 9: **ero** - This LSP attribute is changed.
+
+ .. tab:: JSON
+
+ **Content-Type:** ``application/json``
+
+ **Request Body:**
+
+ .. code-block:: json
+ :linenos:
+ :emphasize-lines: 3,4,7,8,10
+
+ {
+ "input": {
+ "node": "pcc://43.43.43.43",
+ "name": "foo",
+ "arguments": {
+ "lsp": {
+ "delegate": true,
+ "administrative": true
+ },
+ "ero": {
+ "subobject": [
+ {
+ "loose": false,
+ "ip-prefix": {
+ "ip-prefix": "200.20.160.41/32"
+ }
+ },
+ {
+ "loose": false,
+ "ip-prefix": {
+ "ip-prefix": "196.20.160.39/32"
+ }
+ },
+ {
+ "loose": false,
+ "ip-prefix": {
+ "ip-prefix": "39.39.39.39/32"
+ }
+ }
+ ]
+ }
+ },
+ "network-topology-ref": "/network-topology:network-topology/network-topology:topology[network-topology:topology-id=\"pcep-topology\"]"
+ }
+ }
+
+ @line 3: **node** The PCC identifier.
+
+ @line 4: **name** The name of the LSP to be updated.
+
+ @line 7: **delegate** - Delegation flag set *true* in order to keep the LSP control.
+
+ @line 8: **administrative** - Desired administrative status of the LSP is active.
+
+ @line 10: **ero** - This LSP attribute is changed.
PCE-initiated LSP Setup
^^^^^^^^^^^^^^^^^^^^^^^
**URL:** ``/restconf/operations/network-topology-pcep:add-lsp``
+**RFC8040 URL:** ``/rests/operations/network-topology-pcep:add-lsp``
+
**Method:** ``POST``
-**Content-Type:** ``application/xml``
-
-**Request Body:**
-
-.. code-block:: xml
- :linenos:
- :emphasize-lines: 2,3,8,14
-
- <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
- <node>pcc://43.43.43.43</node>
- <name>update-tunel</name>
- <arguments>
- <lsp xmlns="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
- <delegate>true</delegate>
- <administrative>true</administrative>
- </lsp>
- <endpoints-obj>
- <ipv4>
- <source-ipv4-address>43.43.43.43</source-ipv4-address>
- <destination-ipv4-address>39.39.39.39</destination-ipv4-address>
- </ipv4>
- </endpoints-obj>
- <ero>
- <subobject>
- <loose>false</loose>
- <ip-prefix>
- <ip-prefix>201.20.160.40/32</ip-prefix>
- </ip-prefix>
- </subobject>
- <subobject>
- <loose>false</loose>
- <ip-prefix>
- <ip-prefix>195.20.160.39/32</ip-prefix>
- </ip-prefix>
- </subobject>
- <subobject>
- <loose>false</loose>
- <ip-prefix>
- <ip-prefix>39.39.39.39/32</ip-prefix>
- </ip-prefix>
- </subobject>
- </ero>
- </arguments>
- <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
- </input>
-
-@line 2: **node** The PCC identifier.
-
-@line 3: **name** The name of the LSP to be created.
-
-@line 8: **endpoints-obj** - The *END-POINT* Object is mandatory for an instantiation request of an RSVP-signaled LSP. It contains source and destination addresses for provisioning the LSP.
-
-@line 14: **ero** - The *ERO* object is mandatory for LSP initiation request.
+.. tabs::
+
+ .. tab:: XML
+
+ **Content-Type:** ``application/xml``
+
+ **Request Body:**
+
+ .. code-block:: xml
+ :linenos:
+ :emphasize-lines: 2,3,9,15
+
+ <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
+ <node>pcc://43.43.43.43</node>
+ <name>update-tunel</name>
+ <arguments>
+ <lsp xmlns="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
+ <delegate>true</delegate>
+ <administrative>true</administrative>
+ </lsp>
+ <endpoints-obj>
+ <ipv4>
+ <source-ipv4-address>43.43.43.43</source-ipv4-address>
+ <destination-ipv4-address>39.39.39.39</destination-ipv4-address>
+ </ipv4>
+ </endpoints-obj>
+ <ero>
+ <subobject>
+ <loose>false</loose>
+ <ip-prefix>
+ <ip-prefix>201.20.160.40/32</ip-prefix>
+ </ip-prefix>
+ </subobject>
+ <subobject>
+ <loose>false</loose>
+ <ip-prefix>
+ <ip-prefix>195.20.160.39/32</ip-prefix>
+ </ip-prefix>
+ </subobject>
+ <subobject>
+ <loose>false</loose>
+ <ip-prefix>
+ <ip-prefix>39.39.39.39/32</ip-prefix>
+ </ip-prefix>
+ </subobject>
+ </ero>
+ </arguments>
+ <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
+ </input>
+
+ @line 2: **node** The PCC identifier.
+
+ @line 3: **name** The name of the LSP to be created.
+
+ @line 9: **endpoints-obj** - The *END-POINT* Object is mandatory for an instantiation request of an RSVP-signaled LSP. It contains source and destination addresses for provisioning the LSP.
+
+ @line 15: **ero** - The *ERO* object is mandatory for LSP initiation request.
+
+ .. tab:: JSON
+
+ **Content-Type:** ``application/json``
+
+ **Request Body:**
+
+ .. code-block:: json
+ :linenos:
+ :emphasize-lines: 3,4,10,16
+
+ {
+ "input": {
+ "node": "pcc://43.43.43.43",
+ "name": "update-tunel",
+ "arguments": {
+ "lsp": {
+ "delegate": true,
+ "administrative": true
+ },
+ "endpoints-obj": {
+ "ipv4": {
+ "source-ipv4-address": "43.43.43.43",
+ "destination-ipv4-address": "39.39.39.39"
+ }
+ },
+ "ero": {
+ "subobject": [
+ {
+ "loose": false,
+ "ip-prefix": {
+ "ip-prefix": "201.20.160.40/32"
+ }
+ },
+ {
+ "loose": false,
+ "ip-prefix": {
+ "ip-prefix": "195.20.160.39/32"
+ }
+ },
+ {
+ "loose": false,
+ "ip-prefix": {
+ "ip-prefix": "39.39.39.39/32"
+ }
+ }
+ ]
+ }
+ },
+ "network-topology-ref": "/network-topology:network-topology/network-topology:topology[network-topology:topology-id=\"pcep-topology\"]"
+ }
+ }
+
+ @line 3: **node** The PCC identifier.
+
+ @line 4: **name** The name of the LSP to be created.
+
+ @line 10: **endpoints-obj** - The *END-POINT* Object is mandatory for an instantiation request of an RSVP-signaled LSP. It contains source and destination addresses for provisioning the LSP.
+
+ @line 16: **ero** - The *ERO* object is mandatory for LSP initiation request.
LSP Deletion
''''''''''''
**URL:** ``/restconf/operations/network-topology-pcep:remove-lsp``
+**RFC8040 URL:** ``/rests/operations/network-topology-pcep:remove-lsp``
+
**Method:** ``POST``
-**Content-Type:** ``application/xml``
+.. tabs::
+
+ .. tab:: XML
+
+ **Content-Type:** ``application/xml``
+
+ **Request Body:**
+
+ .. code-block:: xml
+ :linenos:
+ :emphasize-lines: 2,3
+
+ <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
+ <node>pcc://43.43.43.43</node>
+ <name>update-tunel</name>
+ <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
+ </input>
-**Request Body:**
+ @line 2: **node** The PCC identifier.
-.. code-block:: xml
- :linenos:
- :emphasize-lines: 2,3
+ @line 3: **name** The name of the LSP to be removed.
- <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
- <node>pcc://43.43.43.43</node>
- <name>update-tunel</name>
- <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
- </input>
+ .. tab:: JSON
-@line 2: **node** The PCC identifier.
+ **Content-Type:** ``application/json``
-@line 3: **name** The name of the LSP to be removed.
+ **Request Body:**
+
+ .. code-block:: json
+ :linenos:
+ :emphasize-lines: 3,4
+
+ {
+ "input": {
+ "node": "pcc://43.43.43.43",
+ "name": "update-tunel",
+ "network-topology-ref": "/network-topology:network-topology/network-topology:topology[network-topology:topology-id=\"pcep-topology\"]"
+ }
+ }
+
+ @line 3: **node** The PCC identifier.
+
+ @line 4: **name** The name of the LSP to be removed.
PCE-initiated LSP Delegation
''''''''''''''''''''''''''''
**URL:** ``/restconf/operations/network-topology-pcep:update-lsp``
+**RFC8040 URL:** ``/rests/operations/network-topology-pcep:update-lsp``
+
**Method:** ``POST``
-**Content-Type:** ``application/xml``
+.. tabs::
+
+ .. tab:: XML
+
+ **Content-Type:** ``application/xml``
+
+ **Request Body:**
+
+ .. code-block:: xml
+ :linenos:
+ :emphasize-lines: 2,3,6,10
+
+ <input>
+ <node>pcc://43.43.43.43</node>
+ <name>update-tunel</name>
+ <arguments>
+ <lsp xmlns:stateful="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
+ <delegate>true</delegate>
+ <administrative>true</administrative>
+ <tlvs>
+ <symbolic-path-name>
+ <path-name>dXBkYXRlLXR1bmVs</path-name>
+ </symbolic-path-name>
+ </tlvs>
+ </lsp>
+ </arguments>
+ <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
+ </input>
+
+ @line 2: **node** The PCC identifier.
+
+ @line 3: **name** The name of the LSP.
+
+ @line 6: **delegate** - *Delegation* flag set *true* in order to take the LSP delegation.
+
+ @line 10: **path-name** - The *Symbolic Path Name* TLV must be present when sending a request to take a delegation.
-**Request Body:**
+ .. tab:: JSON
-.. code-block:: xml
- :linenos:
- :emphasize-lines: 2,3,6,10
+ **Content-Type:** ``application/json``
- <input>
- <node>pcc://43.43.43.43</node>
- <name>update-tunel</name>
- <arguments>
- <lsp xmlns:stateful="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
- <delegate>true</delegate>
- <administrative>true</administrative>
- <tlvs>
- <symbolic-path-name>
- <path-name>dXBkYXRlLXR1bmVs</path-name>
- </symbolic-path-name>
- </tlvs>
- </lsp>
- </arguments>
- <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
- </input>
+ **Request Body:**
-@line 2: **node** The PCC identifier.
+ .. code-block:: json
+ :linenos:
+ :emphasize-lines: 3,4,7,11
-@line 3: **name** The name of the LSP.
+ {
+ "input": {
+ "node": "pcc://43.43.43.43",
+ "name": "update-tunel",
+ "arguments": {
+ "lsp": {
+ "delegate": true,
+ "administrative": true,
+ "tlvs": {
+ "symbolic-path-name": {
+ "path-name": "dXBkYXRlLXR1bmVs"
+ }
+ }
+ }
+ },
+ "network-topology-ref": "/network-topology:network-topology/network-topology:topology[network-topology:topology-id=\"pcep-topology\"]"
+ }
+ }
-@line 6: **delegate** - *Delegation* flag set *true* in order to take the LSP delegation.
+ @line 3: **node** The PCC identifier.
-@line 10: **path-name** - The *Symbolic Path Name* TLV must be present when sending a request to take a delegation.
+ @line 4: **name** The name of the LSP.
+
+ @line 7: **delegate** - *Delegation* flag set *true* in order to take the LSP delegation.
+
+ @line 11: **path-name** - The *Symbolic Path Name* TLV must be present when sending a request to take a delegation.
Segment Routing
^^^^^^^^^^^^^^^
**URL:** ``/restconf/config/pcep-segment-routing-app-config:pcep-segment-routing-app-config``
+**RFC8040 URL:** ``/rests/data/pcep-segment-routing-app-config:pcep-segment-routing-app-config``
+
**Method:** ``PUT``
-**Content-Type:** ``application/xml``
+.. tabs::
+
+ .. tab:: XML
+
+ **Content-Type:** ``application/xml``
+
+ **Request Body:**
+
+ .. code-block:: xml
+ :linenos:
+ :emphasize-lines: 2
-**Request Body:**
+ <pcep-segment-routing-config xmlns="urn:opendaylight:params:xml:ns:yang:controller:pcep:segment-routing-app-config">
+ <sr-capable>false</sr-capable>
+ </pcep-segment-routing-config>
-.. code-block:: xml
- :linenos:
- :emphasize-lines: 2
+ @line 2: **sr-capable** - True if capability is supported.
- <pcep-segment-routing-config xmlns="urn:opendaylight:params:xml:ns:yang:controller:pcep:segment-routing-app-config">
- <sr-capable>false</sr-capable>
- </pcep-segment-routing-config>
+ .. tab:: JSON
-@line 2: **sr-capable** - True if capability is supported.
+ **Content-Type:** ``application/json``
+
+ **Request Body:**
+
+ .. code-block:: json
+ :linenos:
+ :emphasize-lines: 3
+
+ {
+ "pcep-segment-routing-app-config:pcep-segment-routing-config": {
+ "sr-capable": false
+ }
+ }
+
+ @line 3: **sr-capable** - True if capability is supported.
IANA code points
''''''''''''''''
**URL:** ``/restconf/config/pcep-segment-routing-app-config:pcep-segment-routing-config``
+**RFC8040 URL:** ``/rests/data/pcep-segment-routing-app-config:pcep-segment-routing-config``
+
**Method:** ``PUT``
-**Content-Type:** ``application/xml``
+.. tabs::
+
+ .. tab:: XML
-**Request Body:**
+ **Content-Type:** ``application/xml``
-.. code-block:: xml
- :linenos:
- :emphasize-lines: 2
+ **Request Body:**
- <pcep-segment-routing-config xmlns="urn:opendaylight:params:xml:ns:yang:controller:pcep:segment-routing-app-config">
- <iana-sr-subobjects-type>true</iana-sr-subobjects-type>
- </pcep-segment-routing-config>
+ .. code-block:: xml
+ :linenos:
+ :emphasize-lines: 2
-@line 2: **iana-sr-subobjects-type** - True if IANA code points should be used.
+ <pcep-segment-routing-config xmlns="urn:opendaylight:params:xml:ns:yang:controller:pcep:segment-routing-app-config">
+ <iana-sr-subobjects-type>true</iana-sr-subobjects-type>
+ </pcep-segment-routing-config>
+
+ @line 2: **iana-sr-subobjects-type** - True if IANA code points should be used.
+
+ .. tab:: JSON
+
+ **Content-Type:** ``application/json``
+
+ **Request Body:**
+
+ .. code-block:: json
+ :linenos:
+ :emphasize-lines: 3
+
+ {
+ "pcep-segment-routing-app-config:pcep-segment-routing-config": {
+ "iana-sr-subobjects-type": true
+ }
+ }
+
+ @line 3: **iana-sr-subobjects-type** - True if IANA code points should be used.
LSP Operations for PCEP SR
''''''''''''''''''''''''''
**URL:** ``/restconf/operations/network-topology-pcep:add-lsp``
+**RFC8040 URL:** ``/rests/operations/network-topology-pcep:add-lsp``
+
**Method:** ``POST``
-**Content-Type:** ``application/xml``
-
-**Request Body:**
-
-.. code-block:: xml
- :linenos:
- :emphasize-lines: 16,21,22,23
-
- <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
- <node>pcc://43.43.43.43</node>
- <name>sr-path</name>
- <arguments>
- <lsp xmlns="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
- <delegate>true</delegate>
- <administrative>true</administrative>
- </lsp>
- <endpoints-obj>
- <ipv4>
- <source-ipv4-address>43.43.43.43</source-ipv4-address>
- <destination-ipv4-address>39.39.39.39</destination-ipv4-address>
- </ipv4>
- </endpoints-obj>
- <path-setup-type xmlns="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
- <pst>1</pst>
- </path-setup-type>
- <ero>
- <subobject>
- <loose>false</loose>
- <sid-type xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">ipv4-node-id</sid-type>
- <m-flag xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">true</m-flag>
- <sid xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">24001</sid>
- <ip-address xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">39.39.39.39</ip-address>
- </subobject>
- </ero>
- </arguments>
- <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
- </input>
-
-@line 16: **path-setup-type** - Set *1* for SR-TE LSP
-
-@line 21: **ipv4-node-id** - The SR-ERO subobject represents *IPv4 Node ID* NAI.
-
-@line 22: **m-flag** - The SID value represents an MPLS label.
-
-@line 23: **sid** - The Segment Identifier.
+.. tabs::
+
+ .. tab:: XML
+
+ **Content-Type:** ``application/xml``
+
+ **Request Body:**
+
+ .. code-block:: xml
+ :linenos:
+ :emphasize-lines: 16,21,22,23
+
+ <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
+ <node>pcc://43.43.43.43</node>
+ <name>sr-path</name>
+ <arguments>
+ <lsp xmlns="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
+ <delegate>true</delegate>
+ <administrative>true</administrative>
+ </lsp>
+ <endpoints-obj>
+ <ipv4>
+ <source-ipv4-address>43.43.43.43</source-ipv4-address>
+ <destination-ipv4-address>39.39.39.39</destination-ipv4-address>
+ </ipv4>
+ </endpoints-obj>
+ <path-setup-type xmlns="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
+ <pst>1</pst>
+ </path-setup-type>
+ <ero>
+ <subobject>
+ <loose>false</loose>
+ <sid-type xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">ipv4-node-id</sid-type>
+ <m-flag xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">true</m-flag>
+ <sid xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">24001</sid>
+ <ip-address xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">39.39.39.39</ip-address>
+ </subobject>
+ </ero>
+ </arguments>
+ <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
+ </input>
+
+ @line 16: **path-setup-type** - Set *1* for SR-TE LSP
+
+ @line 21: **ipv4-node-id** - The SR-ERO subobject represents *IPv4 Node ID* NAI.
+
+ @line 22: **m-flag** - The SID value represents an MPLS label.
+
+ @line 23: **sid** - The Segment Identifier.
+
+ .. tab:: JSON
+
+ **Content-Type:** ``application/json``
+
+ **Request Body:**
+
+ .. code-block:: json
+ :linenos:
+ :emphasize-lines: 17,22,23,24
+
+ {
+ "input": {
+ "node": "pcc://43.43.43.43",
+ "name": "sr-path",
+ "arguments": {
+ "lsp": {
+ "delegate": true,
+ "administrative": true
+ },
+ "endpoints-obj": {
+ "ipv4": {
+ "source-ipv4-address": "43.43.43.43",
+ "destination-ipv4-address": "39.39.39.39"
+ }
+ },
+ "path-setup-type": {
+ "pst": 1
+ },
+ "ero": {
+ "subobject": {
+ "loose": false,
+ "sid-type": "ipv4-node-id",
+ "m-flag": true,
+ "sid": 24001,
+ "ip-address": "39.39.39.39"
+ }
+ }
+ },
+ "network-topology-ref": "/network-topology:network-topology/network-topology:topology[network-topology:topology-id=\"pcep-topology\"]"
+ }
+ }
+
+@line 17: **path-setup-type** - Set *1* for SR-TE LSP
+
+@line 22: **ipv4-node-id** - The SR-ERO subobject represents *IPv4 Node ID* NAI.
+
+@line 23: **m-flag** - The SID value represents an MPLS label.
+
+@line 24: **sid** - The Segment Identifier.
-----
**URL:** ``/restconf/operations/network-topology-pcep:update-lsp``
+**RFC8040 URL:** ``/rests/operations/network-topology-pcep:update-lsp``
+
**Method:** ``POST``
-**Content-Type:** ``application/xml``
-
-**Request Body:**
-
-.. code-block:: xml
- :linenos:
-
- <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
- <node>pcc://43.43.43.43</node>
- <name>update-tunnel</name>
- <arguments>
- <lsp xmlns="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
- <delegate>true</delegate>
- <administrative>true</administrative>
- </lsp>
- <path-setup-type xmlns="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
- <pst>1</pst>
- </path-setup-type>
- <ero>
- <subobject>
- <loose>false</loose>
- <sid-type xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">ipv4-node-id</sid-type>
- <m-flag xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">true</m-flag>
- <sid xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">24002</sid>
- <ip-address xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">200.20.160.41</ip-address>
- </subobject>
- <subobject>
- <loose>false</loose>
- <sid-type xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">ipv4-node-id</sid-type>
- <m-flag xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">true</m-flag>
- <sid xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">24001</sid>
- <ip-address xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">39.39.39.39</ip-address>
- </subobject>
- </ero>
- </arguments>
- <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
- </input>
+.. tabs::
+
+ .. tab:: XML
+
+ **Content-Type:** ``application/xml``
+
+ **Request Body:**
+
+ .. code-block:: xml
+ :linenos:
+
+ <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
+ <node>pcc://43.43.43.43</node>
+ <name>update-tunnel</name>
+ <arguments>
+ <lsp xmlns="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
+ <delegate>true</delegate>
+ <administrative>true</administrative>
+ </lsp>
+ <path-setup-type xmlns="urn:opendaylight:params:xml:ns:yang:pcep:ietf:stateful">
+ <pst>1</pst>
+ </path-setup-type>
+ <ero>
+ <subobject>
+ <loose>false</loose>
+ <sid-type xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">ipv4-node-id</sid-type>
+ <m-flag xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">true</m-flag>
+ <sid xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">24002</sid>
+ <ip-address xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">200.20.160.41</ip-address>
+ </subobject>
+ <subobject>
+ <loose>false</loose>
+ <sid-type xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">ipv4-node-id</sid-type>
+ <m-flag xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">true</m-flag>
+ <sid xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">24001</sid>
+ <ip-address xmlns="urn:opendaylight:params:xml:ns:yang:pcep:segment:routing">39.39.39.39</ip-address>
+ </subobject>
+ </ero>
+ </arguments>
+ <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
+ </input>
+
+ .. tab:: JSON
+
+ **Content-Type:** ``application/json``
+
+ **Request Body:**
+
+ .. code-block:: json
+ :linenos:
+
+ {
+ "input": {
+ "node": "pcc://43.43.43.43",
+ "name": "foo",
+ "arguments": {
+ "lsp": {
+ "delegate": true,
+ "administrative": true
+ },
+ "path-setup-type": {
+ "pst": 1
+ },
+ "ero": {
+ "subobject": [
+ {
+ "loose": false,
+ "sid-type": "ipv4-node-id",
+ "m-flag" : true,
+ "sid": 24002,
+ "ip-address": "200.20.160.41"
+ },
+ {
+ "loose": false,
+ "sid-type": "ipv4-node-id",
+ "m-flag" : true,
+ "sid": 24001,
+ "ip-address": "39.39.39.39"
+ }
+ ]
+ }
+ },
+ "network-topology-ref": "/network-topology:network-topology/network-topology:topology[network-topology:topology-id=\"pcep-topology\"]"
+ }
+ }
LSP State Synchronization Optimization Procedures
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
**URL:** ``/restconf/operations/network-topology-pcep:trigger-sync``
+**RFC8040 URL:** ``/rests/operations/network-topology-pcep:trigger-sync``
+
**Method:** ``POST``
-**Content-Type:** ``application/xml``
+.. tabs::
+
+ .. tab:: XML
+
+ **Content-Type:** ``application/xml``
+
+ **Request Body:**
-**Request Body:**
+ .. code-block:: xml
+ :linenos:
-.. code-block:: xml
- :linenos:
+ <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
+ <node>pcc://43.43.43.43</node>
+ <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
+ </input>
- <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
- <node>pcc://43.43.43.43</node>
- <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
- </input>
+ .. tab:: JSON
+
+ **Content-Type:** ``application/json``
+
+ **Request Body:**
+
+ .. code-block:: json
+ :linenos:
+
+ {
+ "input": {
+ "node": "pcc://43.43.43.43",
+ "network-topology-ref": "/network-topology:network-topology/network-topology:topology[network-topology:topology-id=\"pcep-topology\"]"
+ }
+ }
PCE-triggered Re-synchronization
''''''''''''''''''''''''''''''''
**URL:** ``/restconf/operations/network-topology-pcep:trigger-sync``
+**RFC8040 URL:** ``/rests/operations/network-topology-pcep:trigger-sync``
+
**Method:** ``POST``
-**Content-Type:** ``application/xml``
+.. tabs::
+
+ .. tab:: XML
+
+ **Content-Type:** ``application/xml``
+
+ **Request Body:**
+
+ .. code-block:: xml
+ :linenos:
+ :emphasize-lines: 3
+
+ <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
+ <node>pcc://43.43.43.43</node>
+ <name>update-lsp</name>
+ <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
+ </input>
+
+ @line 3: **name** - The LSP name. If this parameter is omitted, re-synchronization is requested for all PCC's LSPs.
+
+ .. tab:: JSON
+
+ **Content-Type:** ``application/json``
-**Request Body:**
+ **Request Body:**
-.. code-block:: xml
- :linenos:
- :emphasize-lines: 3
+ .. code-block:: json
+ :linenos:
+ :emphasize-lines: 4
- <input xmlns="urn:opendaylight:params:xml:ns:yang:topology:pcep">
- <node>pcc://43.43.43.43</node>
- <name>update-lsp</name>
- <network-topology-ref xmlns:topo="urn:TBD:params:xml:ns:yang:network-topology">/topo:network-topology/topo:topology[topo:topology-id="pcep-topology"]</network-topology-ref>
- </input>
+ {
+ "input": {
+ "node": "pcc://43.43.43.43",
+ "name": "update-lsp",
+ "network-topology-ref": "/network-topology:network-topology/network-topology:topology[network-topology:topology-id=\"pcep-topology\"]"
+ }
+ }
-@line 3: **name** - The LSP name. If this parameter is omitted, re-synchronization is requested for all PCC's LSPs.
+ @line 4: **name** - The LSP name. If this parameter is omitted, re-synchronization is requested for all PCC's LSPs.
\ No newline at end of file
Code Review / bgpcep.git / commitdiff