*** Settings ***
-Documentation General Utils library. This library has broad scope, it can be used by any robot system tests.
-Library SSHLibrary
-Library HttpLibrary.HTTP
-Library String
-Library DateTime
-Library Process
-Library Collections
-Library RequestsLibrary
-Library OperatingSystem
-Library ${CURDIR}/UtilLibrary.py
-Resource ${CURDIR}/SSHKeywords.robot
-Resource ${CURDIR}/TemplatedRequests.robot
-Variables ${CURDIR}/../variables/Variables.py
+Documentation General Utils library. This library has broad scope, it can be used by any robot system tests.
+
+Library SSHLibrary
+Library String
+Library DateTime
+Library Process
+Library Collections
+Library RequestsLibrary
+Library OperatingSystem
+Library ${CURDIR}/UtilLibrary.py
+Resource ${CURDIR}/SSHKeywords.robot
+Resource ${CURDIR}/TemplatedRequests.robot
+Resource ${CURDIR}/../variables/Variables.robot
+Resource ${CURDIR}/../variables/openflowplugin/Variables.robot
+
*** Variables ***
# TODO: Introduce ${tree_size} and use instead of 1 in the next line.
-${start} sudo mn --controller=remote,ip=${ODL_SYSTEM_IP} --topo tree,1 --switch ovsk,protocols=OpenFlow13
+${start} sudo mn --controller=remote,ip=${ODL_SYSTEM_IP} --topo tree,1 --switch ovsk,protocols=OpenFlow13
+
*** Keywords ***
Start Mininet
- [Arguments] ${system}=${TOOLS_SYSTEM_IP} ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${prompt}=${DEFAULT_LINUX_PROMPT} ${timeout}=30s
[Documentation] Basic setup/cleanup work that can be done safely before any system
... is run.
+ [Arguments] ${system}=${TOOLS_SYSTEM_IP} ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${prompt}=${TOOLS_SYSTEM_PROMPT} ${timeout}=30s
Log Start the test on the base edition
Clean Mininet System
${mininet_conn_id}= Open Connection ${system} prompt=${prompt} timeout=${timeout}
Set Suite Variable ${mininet_conn_id}
- Flexible Mininet Login user=${user} password=${password}
+ SSHKeywords.Flexible Mininet Login user=${user} password=${password}
Execute Command sudo ovs-vsctl set-manager ptcp:6644
Write ${start}
Read Until mininet>
Stop Mininet
- [Arguments] ${prompt}=${DEFAULT_LINUX_PROMPT}
[Documentation] Cleanup/Shutdown work that should be done at the completion of all
... tests
+ [Arguments] ${prompt}=${TOOLS_SYSTEM_PROMPT}
Log Stop the test on the base edition
Switch Connection ${mininet_conn_id}
Read
Read Until ${prompt}
Close Connection
-Report_Failure_Due_To_Bug
- [Arguments] ${number}
+Report Failure Due To Bug
[Documentation] Report that a test failed due to a known Bugzilla bug whose
... number is provided as an argument.
... Not FAILED (incl. SKIPPED) test are not reported.
... or as the first line of the test if FastFail module is not being
... used. It reports the URL of the bug on console and also puts it
... into the Robot log file.
+ [Arguments] ${number} ${include_bug_in_tags}=True
${test_skipped}= BuiltIn.Evaluate len(re.findall('SKIPPED', """${TEST_MESSAGE}""")) > 0 modules=re
- BuiltIn.Return From Keyword If ('${TEST_STATUS}' != 'FAIL') or ${test_skipped}
+ IF ('${TEST_STATUS}' != 'FAIL') or ${test_skipped} RETURN
+ Comment Jira tickets are {PROJECT}-{NUMBER} while Bugzilla tickets are {NUMBER}
+ ${match}= BuiltIn.Run Keyword And Return Status Should Contain ${number} -
+ ${bug_url}= BuiltIn.Set Variable If
+ ... ${match}
+ ... https://jira.opendaylight.org/browse/${number}
+ ... https://bugs.opendaylight.org/show_bug.cgi?id=${number}
+ ${msg}= BuiltIn.Set_Variable This test fails due to ${bug_url}
${newline}= BuiltIn.Evaluate chr(10)
- ${msg}= BuiltIn.Set_Variable This test fails due to https://bugs.opendaylight.org/show_bug.cgi?id=${number}
BuiltIn.Set Test Message ${msg}${newline}${newline}${TEST_MESSAGE}
BuiltIn.Log ${msg}
+ IF "${include_bug_in_tags}"=="True" Set Tags ${bug_url}
Report_Failure_And_Point_To_Linked_Bugs
[Documentation] Report that a test failed and point to linked Bugzilla bug(s).
... used. It reports the URL of the bug on console and also puts it
... into the Robot log file.
${test_skipped}= BuiltIn.Evaluate len(re.findall('SKIPPED', """${TEST_MESSAGE}""")) > 0 modules=re
- BuiltIn.Return From Keyword If ('${TEST_STATUS}' != 'FAIL') or ${test_skipped}
+ IF ('${TEST_STATUS}' != 'FAIL') or ${test_skipped} RETURN
${newline}= BuiltIn.Evaluate chr(10)
${reference}= String.Replace_String_Using_Regexp ${SUITE_NAME}_${TEST_NAME} [ /\.-] _
${reference}= String.Convert_To_Lowercase ${reference}
- ${msg}= BuiltIn.Set_Variable ... click for list of related bugs or create a new one if needed (with the${newline}"${reference}"${newline}reference somewhere inside)
- ${bugs}= BuiltIn.Set_Variable "https://bugs.opendaylight.org/buglist.cgi?f1=cf_external_ref&o1=substring&v1=${reference}&order=bug_status"
+ ${msg}= BuiltIn.Set_Variable
+ ... ... click for list of related bugs or create a new one if needed (with the${newline}"${reference}"${newline}reference somewhere inside)
+ ${bugs}= BuiltIn.Set_Variable
+ ... "https://bugs.opendaylight.org/buglist.cgi?f1=cf_external_ref&o1=substring&v1=${reference}&order=bug_status"
BuiltIn.Set Test Message ${msg}${newline}${bugs}${newline}${newline}${TEST_MESSAGE}
BuiltIn.Log ${msg}${newline}${bugs}
Check Nodes Stats
- [Arguments] ${node} ${session}=session
[Documentation] A GET on the /node/${node} API is made and specific flow stat
... strings are checked for existence.
- ${resp} RequestsLibrary.Get Request ${session} ${OPERATIONAL_NODES_API}/node/${node}
+ [Arguments] ${node} ${session}=session
+ ${resp}= RequestsLibrary.Get On Session
+ ... ${session}
+ ... url=${RFC8040_NODES_API}/node=${node}
+ ... params=${RFC8040_OPERATIONAL_CONTENT}
Should Be Equal As Strings ${resp.status_code} 200
- Should Contain ${resp.content} flow-capable-node-connector-statistics
- Should Contain ${resp.content} flow-table-statistics
+ Should Contain ${resp.text} flow-capable-node-connector-statistics
+ Should Contain ${resp.text} flow-table-statistics
Check For Specific Number Of Elements At URI
- [Arguments] ${uri} ${element} ${expected_count} ${session}=session
[Documentation] A GET is made to the specified ${URI} and the specific count of a
... given element is done (as supplied by ${element} and ${expected_count})
- ${resp} RequestsLibrary.Get Request ${session} ${uri}
- Log ${resp.content}
+ [Arguments] ${uri} ${element} ${expected_count} ${session}=session
+ ${resp}= RequestsLibrary.Get On Session ${session} url=${uri}
+ Log ${resp.text}
Should Be Equal As Strings ${resp.status_code} 200
- Should Contain X Times ${resp.content} ${element} ${expected_count}
+ Should Contain X Times ${resp.text} ${element} ${expected_count}
+
+Log Content
+ [Arguments] ${resp_content}
+ IF '''${resp_content}''' != '${EMPTY}'
+ ${resp_json}= BuiltIn.Evaluate
+ ... json.dumps(json.loads('''${resp_content}'''), sort_keys=True, indent=4, separators=(',', ': '))
+ ... modules=json
+ ELSE
+ ${resp_json}= BuiltIn.Set Variable ${EMPTY}
+ END
+ BuiltIn.Log ${resp_json}
+ RETURN ${resp_json}
Check For Elements At URI
- [Arguments] ${uri} ${elements} ${session}=session
[Documentation] A GET is made at the supplied ${URI} and every item in the list of
... ${elements} is verified to exist in the response
- ${resp} RequestsLibrary.Get Request ${session} ${uri}
- Log ${resp.content}
+ [Arguments] ${uri} ${elements} ${session}=session ${pretty_print_json}=False
+ ${resp}= RequestsLibrary.Get On Session ${session} url=${uri}
+ IF "${pretty_print_json}" == "True"
+ Log Content ${resp.text}
+ ELSE
+ BuiltIn.Log ${resp.text}
+ END
Should Be Equal As Strings ${resp.status_code} 200
- : FOR ${i} IN @{elements}
- \ Should Contain ${resp.content} ${i}
+ FOR ${i} IN @{elements}
+ Should Contain ${resp.text} ${i}
+ END
Check For Elements Not At URI
- [Arguments] ${uri} ${elements} ${session}=session
- [Documentation] A GET is made at the supplied ${URI} and every item in the list of
- ... ${elements} is verified to NOT exist in the response
- ${resp} RequestsLibrary.Get Request ${session} ${uri}
- Log ${resp.content}
+ [Documentation] A GET is made at the supplied ${uri} and every item in the list of
+ ... ${elements} is verified to NOT exist in the response. If ${check_for_null} is True
+ ... return of 404 is treated as empty list. From Neon onwards, an empty list is always
+ ... returned as null, giving 404 on rest call.
+ [Arguments] ${uri} ${elements} ${session}=session ${pretty_print_json}=False ${check_for_null}=False
+ ${resp}= RequestsLibrary.Get On Session ${session} url=${uri}
+ IF "${pretty_print_json}" == "True"
+ Log Content ${resp.text}
+ ELSE
+ BuiltIn.Log ${resp.text}
+ END
+ IF "${check_for_null}" == "True"
+ IF ${resp.status_code} == 404 or ${resp.status_code} == 409 RETURN
+ END
Should Be Equal As Strings ${resp.status_code} 200
- : FOR ${i} IN @{elements}
- \ Should Not Contain ${resp.content} ${i}
+ FOR ${i} IN @{elements}
+ Should Not Contain ${resp.text} ${i}
+ END
Clean Mininet System
[Arguments] ${system}=${TOOLS_SYSTEM_IP}
Run Command On Mininet ${system} sudo mn -c
- Run Command On Mininet ${system} sudo ps -elf | egrep 'usr/local/bin/mn' | egrep python | awk '{print "sudo kill -9",$4}' | sh
+ Run Command On Mininet
+ ... ${system}
+ ... sudo ps -elf | egrep 'usr/local/bin/mn' | egrep python | awk '{print "sudo kill -9",$4}' | sh
Clean Up Ovs
- [Arguments] ${system}=${TOOLS_SYSTEM_IP}
[Documentation] Cleans up the OVS instance and remove any existing common known bridges.
+ [Arguments] ${system}=${TOOLS_SYSTEM_IP}
${output}= Run Command On Mininet ${system} sudo ovs-vsctl list-br
Log ${output}
- : FOR ${i} IN ${output}
- \ Run Command On Mininet ${system} sudo ovs-vsctl --if-exists del-br ${i}
+ FOR ${i} IN ${output}
+ Run Command On Mininet ${system} sudo ovs-vsctl --if-exists del-br ${i}
+ END
Run Command On Mininet ${system} sudo ovs-vsctl del-manager
Extract Value From Content
- [Arguments] ${content} ${index} ${strip}=nostrip
[Documentation] Will take the given response content and return the value at the given index as a string
- ${value}= Get Json Value ${content} ${index}
- ${value}= Convert To String ${value}
- ${value}= Run Keyword If '${strip}' == 'strip' Strip Quotes ${value}
- [Return] ${value}
+ [Arguments] ${content} ${index}
+ ${JSON}= BuiltIn.Evaluate json.loads('''${content}''') modules=json
+ ${value}= Set Variable ${JSON${index}}
+ RETURN ${value}
Get Process ID Based On Regex On Remote System
- [Arguments] ${system} ${regex_string_to_match_on} ${user}=${TOOLS_SYSTEM_USER} ${password}=${EMPTY} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=30s
[Documentation] Uses ps to find a process that matches the supplied regex. Returns the PID of that process
... The ${regex_string_to_match_on} should produce a unique process otherwise the PID returned may not be
... the expected PID
+ [Arguments] ${system} ${regex_string_to_match_on} ${user}=${TOOLS_SYSTEM_USER} ${password}=${EMPTY} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=30s
# doing the extra -v grep in this command to exclude the grep process itself from the output
${cmd}= Set Variable ps -elf | grep -v grep | grep ${regex_string_to_match_on} | awk '{print $4}'
- ${output}= Run Command On Remote System ${system} ${cmd} user=${user} password=${password} prompt=${prompt}
+ ${output}= Run Command On Remote System
+ ... ${system}
+ ... ${cmd}
+ ... user=${user}
+ ... password=${password}
+ ... prompt=${prompt}
... prompt_timeout=${prompt_timeout}
# ${output} contains the system prompt and all we want is the value of the number
${pid}= Fetch From Left ${output} \r
- # TODO: Get Process * keywords have perhaps non-standard default credentials.
+ RETURN ${pid}
+
# ... Should there be * On Mininet and * On Controller specializations?
- [Return] ${pid}
+ # TODO: Get Process * keywords have perhaps non-standard default credentials.
Get Process Thread Count On Remote System
- [Arguments] ${system} ${pid} ${user}=${TOOLS_SYSTEM_USER} ${password}=${EMPTY} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=30s
[Documentation] Executes the ps command to retrieve the lightweight process (aka thread) count.
+ [Arguments] ${system} ${pid} ${user}=${TOOLS_SYSTEM_USER} ${password}=${EMPTY} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=30s
${cmd}= Set Variable ps --no-headers -o nlwp ${pid}
- ${output}= Run Command On Remote System ${system} ${cmd} user=${user} password=${password} prompt=${prompt}
+ ${output}= Run Command On Remote System
+ ... ${system}
+ ... ${cmd}
+ ... user=${user}
+ ... password=${password}
+ ... prompt=${prompt}
... prompt_timeout=${prompt_timeout}
# ${output} contains the system prompt and all we want is the value of the number
${thread_count}= Fetch From Left ${output} \r
- [Return] ${thread_count}
+ RETURN ${thread_count}
Strip Quotes
- [Arguments] ${string_to_strip}
[Documentation] Will strip ALL quotes from given string and return the new string
+ [Arguments] ${string_to_strip}
${string_to_return}= Replace String ${string_to_strip} " \ count=-1
- [Return] ${string_to_return}
-
-Flexible SSH Login
- [Arguments] ${user} ${password}=${EMPTY} ${delay}=0.5s
- [Documentation] On active SSH session: if given non-empty password, do Login, else do Login With Public Key.
- ${pwd_length} = BuiltIn.Get Length ${password}
- # ${pwd_length} is guaranteed to be an integer, so we are safe to evaluate it as Python expression.
- BuiltIn.Run Keyword And Return If ${pwd_length} > 0 SSHLibrary.Login ${user} ${password} delay=${delay}
- BuiltIn.Run Keyword And Return SSHLibrary.Login With Public Key ${user} ${USER_HOME}/.ssh/${SSH_KEY} ${KEYFILE_PASS} delay=${delay}
-
-Flexible Mininet Login
- [Arguments] ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${delay}=0.5s
- [Documentation] Call Flexible SSH Login, but with default values suitable for Mininet machine.
- BuiltIn.Run Keyword And Return Flexible SSH Login user=${user} password=${password} delay=${delay}
-
-Flexible Controller Login
- [Arguments] ${user}=${ODL_SYSTEM_USER} ${password}=${ODL_SYSTEM_PASSWORD} ${delay}=0.5s
- [Documentation] Call Flexible SSH Login, but with default values suitable for Controller machine.
- BuiltIn.Run Keyword And Return Flexible SSH Login user=${user} password=${password} delay=${delay}
+ RETURN ${string_to_return}
Run Command On Remote System
- [Arguments] ${system} ${cmd} ${user}=${DEFAULT_USER} ${password}=${EMPTY} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=${DEFAULT_TIMEOUT}
[Documentation] Reduces the common work of running a command on a remote system to a single higher level
- ... robot keyword, taking care to log in with a public key and. The command given is written
- ... and the output returned. No test conditions are checked.
+ ... robot keyword, taking care to log in with a public key and. The command given is written and the return value
+ ... depends on the passed argument values of return_stdout (default: True) and return_stderr (default: False).
+ ... At least one should be True, or the keyword will exit and FAIL. If both are True, the resulting return value
+ ... will be a two element list containing both. Otherwise the resulting return value is a string.
+ ... No test conditions are checked.
+ [Arguments] ${system} ${cmd} ${user}=${DEFAULT_USER} ${password}=${EMPTY} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=${DEFAULT_TIMEOUT}
+ ... ${return_stdout}=True ${return_stderr}=False
+ IF "${return_stdout}"!="True" and "${return_stderr}"!="True"
+ Fail At least one of {return_stdout} or {return_stderr} args should be set to True
+ END
${current_ssh_connection}= SSHLibrary.Get Connection
- BuiltIn.Log Attempting to execute command "${cmd}" on remote system "${system}" by user "${user}" with keyfile pass "${keyfile_pass}" and prompt "${prompt}"
- BuiltIn.Log ${password}
+ BuiltIn.Log
+ ... Attempting to execute command "${cmd}" on remote system "${system}" by user "${user}" with keyfile pass "${keyfile_pass}" and prompt "${prompt}" and password "${password}"
${conn_id}= SSHLibrary.Open Connection ${system} prompt=${prompt} timeout=${prompt_timeout}
- Flexible SSH Login ${user} ${password}
- ${stdout} ${stderr} SSHLibrary.Execute Command ${cmd} return_stderr=True
+ SSHKeywords.Flexible SSH Login ${user} ${password}
+ ${stdout} ${stderr}= SSHLibrary.Execute Command ${cmd} return_stderr=True
SSHLibrary.Close Connection
Log ${stderr}
+ IF "${return_stdout}"!="True" RETURN ${stderr}
+ IF "${return_stderr}"!="True" RETURN ${stdout}
+ RETURN ${stdout} ${stderr}
[Teardown] SSHKeywords.Restore_Current_SSH_Connection_From_Index ${current_ssh_connection.index}
- [Return] ${stdout}
-
-Write_Bare_Ctrl_C
- [Documentation] Construct ctrl+c character and SSH-write it (without endline) to the current SSH connection.
- ... Do not read anything yet.
- BuiltIn.Comment Use RemoteBash.Write_Bare_Ctrl_C instead.
- ${ctrl_c}= BuiltIn.Evaluate chr(int(3))
- SSHLibrary.Write_Bare ${ctrl_c}
-
-Write Bare Ctrl D
- [Documentation] Construct ctrl+d character and SSH-write it (without endline) to the current SSH connection.
- ... Do not read anything yet.
- BuiltIn.Comment Use RemoteBash.Write_Bare_Ctrl_D instead.
- ${ctrl_d}= BuiltIn.Evaluate chr(int(4))
- SSHLibrary.Write Bare ${ctrl_d}
+
+Run Command On Remote System And Log
+ [Documentation] Reduces the common work of running a command on a remote system to a single higher level
+ ... robot keyword, taking care to log in with a public key and. The command given is written
+ ... and the output returned. No test conditions are checked.
+ [Arguments] ${system} ${cmd} ${user}=${DEFAULT_USER} ${password}=${EMPTY} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=${DEFAULT_TIMEOUT}
+ ${output}= Run Command On Remote System ${system} ${cmd} ${user} ${password} ${prompt}
+ ... ${prompt_timeout}
+ Log ${output}
+ RETURN ${output}
Run Command On Mininet
- [Arguments] ${system}=${TOOLS_SYSTEM_IP} ${cmd}=echo ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${prompt}=${TOOLS_SYSTEM_PROMPT}
[Documentation] Call Run Comand On Remote System, but with default values suitable for Mininet machine.
- BuiltIn.Run Keyword And Return Run Command On Remote System ${system} ${cmd} ${user} ${password} prompt=${prompt}
+ [Arguments] ${system}=${TOOLS_SYSTEM_IP} ${cmd}=echo ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${prompt}=${TOOLS_SYSTEM_PROMPT}
+ BuiltIn.Run Keyword And Return
+ ... Run Command On Remote System
+ ... ${system}
+ ... ${cmd}
+ ... ${user}
+ ... ${password}
+ ... prompt=${prompt}
Run Command On Controller
- [Arguments] ${system}=${ODL_SYSTEM_IP} ${cmd}=echo ${user}=${ODL_SYSTEM_USER} ${password}=${ODL_SYSTEM_PASSWORD} ${prompt}=${ODL_SYSTEM_PROMPT}
[Documentation] Call Run Comand On Remote System, but with default values suitable for Controller machine.
- BuiltIn.Log ${password}
- BuiltIn.Run Keyword And Return Run Command On Remote System ${system} ${cmd} ${user} ${password} prompt=${prompt}
+ [Arguments] ${system}=${ODL_SYSTEM_IP} ${cmd}=echo ${user}=${ODL_SYSTEM_USER} ${password}=${ODL_SYSTEM_PASSWORD} ${prompt}=${ODL_SYSTEM_PROMPT}
+ BuiltIn.Run Keyword And Return
+ ... Run Command On Remote System
+ ... ${system}
+ ... ${cmd}
+ ... ${user}
+ ... ${password}
+ ... prompt=${prompt}
+
+Run Command On Existing Connection
+ [Documentation] Switch to and run command on an already existing SSH connection and switch back
+ [Arguments] ${conn_id}=${EMPTY} ${cmd}=echo ${return_stdout}=True ${return_stderr}=False
+ IF "${return_stdout}"!="True" and "${return_stderr}"!="True"
+ Fail At least one of {return_stdout} or {return_stderr} args should be set to True
+ END
+ ${current_ssh_connection}= SSHLibrary.Get Connection
+ BuiltIn.Log Attempting to execute command "${cmd}" on existing connection "${conn_id}
+ SSHLibrary.Switch Connection ${conn_id}
+ ${stdout} ${stderr}= SSHLibrary.Execute Command ${cmd} return_stderr=True
+ Log ${stderr}
+ IF "${return_stdout}"!="True" RETURN ${stderr}
+ IF "${return_stderr}"!="True" RETURN ${stdout}
+ RETURN ${stdout} ${stderr}
+ [Teardown] SSHKeywords.Restore_Current_SSH_Connection_From_Index ${current_ssh_connection.index}
Verify File Exists On Remote System
- [Arguments] ${system} ${file} ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=5s
[Documentation] Will create connection with public key and will PASS if the given ${file} exists,
... otherwise will FAIL
+ [Arguments] ${system} ${file} ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=5s
${conn_id}= Open Connection ${system} prompt=${prompt} timeout=${prompt_timeout}
- Flexible SSH Login ${user} ${password}
+ SSHKeywords.Flexible SSH Login ${user} ${password}
SSHLibrary.File Should Exist ${file}
Close Connection
Check Karaf Log File Does Not Have Messages
- [Arguments] ${ip} ${message} ${user}=${ODL_SYSTEM_USER} ${password}=${ODL_SYSTEM_PASSWORD} ${prompt}=${ODL_SYSTEM_PROMPT} ${log_file}=${WORKSPACE}/${BUNDLEFOLDER}/data/log/karaf.log
[Documentation] Fails if the provided ${message} is found in the karaf.log file. Uses grep to search. The
... karaf.log file can be overridden with ${log_file} to be any file on the given system @ ${ip}
- ${output}= Run Command On Controller ${ip} grep -c '${message}' ${log_file} user=${user} password=${password} prompt=${prompt}
+ [Arguments] ${ip} ${message} ${user}=${ODL_SYSTEM_USER} ${password}=${ODL_SYSTEM_PASSWORD} ${prompt}=${ODL_SYSTEM_PROMPT} ${log_file}=${WORKSPACE}/${BUNDLEFOLDER}/data/log/karaf.log
+ ${output}= Run Command On Controller
+ ... ${ip}
+ ... grep -c '${message}' ${log_file}
+ ... user=${user}
+ ... password=${password}
+ ... prompt=${prompt}
Should Be Equal As Strings ${output} 0
Verify Controller Is Not Dead
- [Arguments] ${controller_ip}=${ODL_SYSTEM_IP}
[Documentation] Will execute any tests to verify the controller is not dead. Some checks are
... Out Of Memory Execptions.
+ [Arguments] ${controller_ip}=${ODL_SYSTEM_IP}
Check Karaf Log File Does Not Have Messages ${controller_ip} java.lang.OutOfMemoryError
# TODO: Should Verify Controller * keywords also accept user, password, prompt and karaf_log arguments?
Verify Controller Has No Null Pointer Exceptions
- [Arguments] ${controller_ip}=${ODL_SYSTEM_IP}
[Documentation] Will execute any tests to verify the controller is not having any null pointer eceptions.
+ [Arguments] ${controller_ip}=${ODL_SYSTEM_IP}
Check Karaf Log File Does Not Have Messages ${controller_ip} java.lang.NullPointerException
+Verify Controller Has No Runtime Exceptions
+ [Documentation] Will execute any tests to verify the controller is not having any runtime eceptions.
+ [Arguments] ${controller_ip}=${ODL_SYSTEM_IP}
+ Check Karaf Log File Does Not Have Messages ${controller_ip} java.lang.RuntimeException
+
Get Epoch Time
- [Arguments] ${time}
[Documentation] Get the Epoc time from MM/DD/YYYY HH:MM:SS
+ [Arguments] ${time}
${epoch_time}= Convert Date ${time} epoch exclude_milles=True date_format=%m/%d/%Y %H:%M:%S
${epoch_time}= Convert To Integer ${epoch_time}
- [Return] ${epoch_time}
+ RETURN ${epoch_time}
Remove Space on String
- [Arguments] ${str} ${count}=-1
[Documentation] Remove the empty space from given string.count is optional,if its given
... that many occurence of space will be removed from left
+ [Arguments] ${str} ${count}=-1
${x}= Convert To String ${str}
${x}= Replace String ${str} ${SPACE} ${EMPTY} count=${count}
- [Return] ${x}
+ RETURN ${x}
Split Value from String
- [Arguments] ${str} ${splitter}
[Documentation] Split the String based on given splitter and return as list
+ [Arguments] ${str} ${splitter}
@{x}= Split String ${str} ${splitter}
- [Return] @{x}
+ RETURN @{x}
Concatenate the String
- [Arguments] ${str1} ${str2}
[Documentation] Catenate the two non-string objects and return as String
+ [Arguments] ${str1} ${str2}
${str1}= Convert to String ${str1}
${str2}= Convert to String ${str2}
${output}= Catenate ${str1} ${str2}
- [Return] ${output}
+ RETURN ${output}
Post Elements To URI
- [Arguments] ${rest_uri} ${data} ${headers}=${headers} ${session}=session
[Documentation] Perform a POST rest operation, using the URL and data provided
- ${resp} = RequestsLibrary.Post Request ${session} ${rest_uri} data=${data} headers=${headers}
- Log ${resp.content}
+ [Arguments] ${rest_uri} ${data} ${headers}=${headers} ${session}=session
+ ${resp}= RequestsLibrary.Post On Session ${session} url=${rest_uri} data=${data} headers=${headers}
+ Log ${resp.text}
Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code}
Remove All Elements At URI
[Arguments] ${uri} ${session}=session
- ${resp} RequestsLibrary.Delete Request ${session} ${uri}
+ ${resp}= RequestsLibrary.Delete On Session ${session} url=${uri}
Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code}
Remove All Elements At URI And Verify
[Arguments] ${uri} ${session}=session
- ${resp} RequestsLibrary.Delete Request ${session} ${uri}
+ ${resp}= RequestsLibrary.Delete On Session ${session} url=${uri}
Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code}
- ${resp} RequestsLibrary.Get Request ${session} ${uri}
- Should Be Equal As Strings ${resp.status_code} 404
+ ${resp}= RequestsLibrary.Get On Session ${session} url=${uri}
+ Should Contain ${DELETED_STATUS_CODES} ${resp.status_code}
Remove All Elements If Exist
- [Arguments] ${uri} ${session}=session
[Documentation] Delete all elements from an URI if the configuration was not empty
- ${resp} RequestsLibrary.Get Request ${session} ${uri}
- Run Keyword If '${resp.status_code}'!='404' Remove All Elements At URI ${uri} ${session}
+ [Arguments] ${uri} ${session}=session
+ ${resp}= RequestsLibrary.Get On Session ${session} url=${uri}
+ IF '${resp.status_code}'!='404' and '${resp.status_code}'!='409'
+ Remove All Elements At URI ${uri} ${session}
+ END
Add Elements To URI From File
+ [Documentation] Put data from a file to a URI
[Arguments] ${dest_uri} ${data_file} ${headers}=${headers} ${session}=session
- ${body} OperatingSystem.Get File ${data_file}
- ${resp} RequestsLibrary.Put Request ${session} ${dest_uri} data=${body} headers=${headers}
+ ${body}= OperatingSystem.Get File ${data_file}
+ ${resp}= RequestsLibrary.Put On Session ${session} url=${dest_uri} data=${body} headers=${headers}
Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code}
Add Elements To URI From File And Verify
+ [Documentation] Put data from a file to a URI and verify the HTTP response
[Arguments] ${dest_uri} ${data_file} ${headers}=${headers} ${session}=session
- ${body} OperatingSystem.Get File ${data_file}
- ${resp} RequestsLibrary.Put Request ${session} ${dest_uri} data=${body} headers=${headers}
- Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code}
- ${resp} RequestsLibrary.Get Request ${session} ${dest_uri}
- Should Not Be Equal ${resp.status_code} 404
+ ${body}= OperatingSystem.Get File ${data_file}
+ Add Elements to URI And Verify ${dest_uri} ${body} ${headers} ${session}
Add Elements To URI And Verify
- [Arguments] ${dest_uri} ${data_file} ${headers}=${headers} ${session}=session
- ${resp} RequestsLibrary.Put Request ${session} ${dest_uri} ${data_file} headers=${headers}
+ [Documentation] Put data to a URI and verify the HTTP response
+ [Arguments] ${dest_uri} ${data} ${headers}=${headers} ${session}=session
+ ${resp}= RequestsLibrary.Put On Session ${session} url=${dest_uri} ${data} headers=${headers}
Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code}
- ${resp} RequestsLibrary.Get Request ${session} ${dest_uri}
- Should Not Be Equal ${resp.status_code} 404
+ ${resp}= RequestsLibrary.Get On Session ${session} url=${dest_uri}
+ Should Not Contain ${DELETED_STATUS_CODES} ${resp.status_code}
Add Elements To URI From File And Check Validation Error
+ [Documentation] Shorthand for PUTting data from file and expecting status code 400.
[Arguments] ${dest_uri} ${data_file} ${headers}=${headers} ${session}=session
- ${body} OperatingSystem.Get File ${data_file}
- ${resp} RequestsLibrary.Put Request ${session} ${dest_uri} data=${body} headers=${headers}
+ BuiltIn.Comment TODO: Does this have any benefits, considering TemplatedRequests can also do this in one line?
+ ${body}= OperatingSystem.Get File ${data_file}
+ ${resp}= RequestsLibrary.Put On Session ${session} url=${dest_uri} data=${body} headers=${headers}
Should Contain ${DATA_VALIDATION_ERROR} ${resp.status_code}
+Add Elements To URI From File And Check Server Error
+ [Documentation] Shorthand for PUTting data from file and expecting status code 500.
+ ... Consider opening a Bug against ODL, as in most test cases, 400 is the http code to expect.
+ [Arguments] ${dest_uri} ${data_file} ${headers}=${headers} ${session}=session
+ BuiltIn.Comment TODO: Does this have any benefits, considering TemplatedRequests can also do this in one line?
+ ${body}= OperatingSystem.Get File ${data_file}
+ ${resp}= RequestsLibrary.Put On Session ${session} url=${dest_uri} data=${body} headers=${headers}
+ Should Contain ${INTERNAL_SERVER_ERROR} ${resp.status_code}
+
Post Elements To URI From File
[Arguments] ${dest_uri} ${data_file} ${headers}=${headers} ${session}=session
- ${body} OperatingSystem.Get File ${data_file}
- ${resp} RequestsLibrary.Post Request ${session} ${dest_uri} data=${body} headers=${headers}
+ ${body}= OperatingSystem.Get File ${data_file}
+ ${resp}= RequestsLibrary.Post On Session ${session} url=${dest_uri} data=${body} headers=${headers}
Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code}
Run Process With Logging And Status Check
- [Arguments] @{proc_args}
[Documentation] Execute an OS command, log STDOUT and STDERR output and check exit code to be 0
+ [Arguments] @{proc_args}
${result}= Run Process @{proc_args}
Log ${result.stdout}
Log ${result.stderr}
Should Be Equal As Integers ${result.rc} 0
- [Return] ${result}
+ RETURN ${result}
Get Data From URI
- [Arguments] ${session} ${uri} ${headers}=${NONE}
- [Documentation] Issue a GET request and return the data obtained or on error log the error and fail.
- ... Issues a GET request for ${uri} in ${session} using headers from
+ [Documentation] Issue a Get On Session and return the data obtained or on error log the error and fail.
+ ... Issues a Get On Session for ${uri} in ${session} using headers from
... ${headers}. If the request returns a HTTP error, fails. Otherwise
... returns the data obtained by the request.
- ${response}= RequestsLibrary.Get Request ${session} ${uri} ${headers}
- Builtin.Return_From_Keyword_If ${response.status_code} == 200 ${response.text}
- Builtin.Log ${response.text}
- Builtin.Fail The request failed with code ${response.status_code}
+ [Arguments] ${session} ${uri} ${headers}=${NONE}
+ ${resp}= RequestsLibrary.Get On Session ${session} url=${uri} headers=${headers}
+ IF ${resp.status_code} == 200 RETURN ${resp.text}
+ Builtin.Log ${resp.text}
+ Builtin.Fail The request failed with code ${resp.status_code}
+
+Get URI And Verify
+ [Documentation] Issue a Get On Session and verify a successfull HTTP return.
+ ... Issues a Get On Session for ${uri} in ${session} using headers from ${headers}.
+ [Arguments] ${uri} ${session}=session ${headers}=${NONE}
+ ${resp}= RequestsLibrary.Get On Session ${session} url=${uri} headers=${headers}
+ Builtin.Log ${resp.status_code}
+ Should Contain ${ALLOWED_STATUS_CODES} ${resp.status_code}
No Content From URI
- [Arguments] ${session} ${uri} ${headers}=${NONE}
- [Documentation] Issue a GET request and return on error 404 (No content) or will fail and log the content.
- ... Issues a GET request for ${uri} in ${session} using headers from
+ [Documentation] Issue a Get On Session and return on error 404 (No content) or will fail and log the content.
+ ... Issues a Get On Session for ${uri} in ${session} using headers from
... ${headers}. If the request returns a HTTP error, fails. Otherwise
... returns the data obtained by the request.
- ${response}= RequestsLibrary.Get Request ${session} ${uri} ${headers}
- Builtin.Return_From_Keyword_If ${response.status_code} == 404
- Builtin.Log ${response.text}
- Builtin.Fail The request failed with code ${response.status_code}
+ [Arguments] ${session} ${uri} ${headers}=${NONE}
+ ${resp}= RequestsLibrary.Get On Session
+ ... ${session}
+ ... url=${uri}
+ ... headers=${headers}
+ ... expected_status=anything
+ IF ${resp.status_code} == 404 or ${resp.status_code} == 409 RETURN
+ Builtin.Log ${resp.text}
+ Builtin.Fail The request failed with code ${resp.status_code}
Get Index From List Of Dictionaries
- [Arguments] ${dictionary_list} ${key} ${value}
[Documentation] Extract index for the dictionary in a list that contains a key-value pair. Returns -1 if key-value is not found.
+ [Arguments] ${dictionary_list} ${key} ${value}
${length}= Get Length ${dictionary_list}
${index}= Set Variable -1
- : FOR ${i} IN RANGE ${length}
- \ ${dictionary}= Get From List ${dictionary_list} ${i}
- \ Run Keyword If """&{dictionary}[${key}]""" == """${value}""" Set Test Variable ${index} ${i}
- [Return] ${index}
+ FOR ${i} IN RANGE ${length}
+ ${dictionary}= Get From List ${dictionary_list} ${i}
+ IF """${dictionary}[${key}]""" == """${value}"""
+ Set Test Variable ${index} ${i}
+ END
+ END
+ RETURN ${index}
Check Item Occurrence
- [Arguments] ${string} ${dictionary_item_occurrence}
[Documentation] Check string for occurrences of items expressed in a list of dictionaries {item=occurrences}. 0 occurences means item is not present.
- : FOR ${item} IN @{dictionary_item_occurrence}
- \ Should Contain X Times ${string} ${item} &{dictionary_item_occurrence}[${item}]
+ [Arguments] ${string} ${dictionary_item_occurrence}
+ FOR ${item} IN @{dictionary_item_occurrence}
+ Should Contain X Times ${string} ${item} ${dictionary_item_occurrence}[${item}]
+ END
Post Log Check
- [Arguments] ${uri} ${body} ${status_code}=200 ${session}=session
[Documentation] Post body to ${uri}, log response content, and check status
- ${resp}= RequestsLibrary.Post Request ${session} ${uri} ${body}
- Log ${resp.content}
- Should Be Equal As Strings ${resp.status_code} ${status_code}
- [Return] ${resp}
+ [Arguments] ${uri} ${body} ${session}=session ${status_codes}=200
+ ${resp}= RequestsLibrary.Post On Session ${session} url=${uri} data=${body}
+ Log ${resp.text}
+ TemplatedRequests.Check Status Code ${resp} ${status_codes}
+ RETURN ${resp}
Get Log File Name
- [Arguments] ${testtool} ${testcase}=${EMPTY}
[Documentation] Get the name of the suite sanitized to be usable as a part of filename.
... These names are used to constructs names of the log files produced
... by the testing tools so two suites using a tool wont overwrite the
... log files if they happen to run in one job.
+ [Arguments] ${testtool} ${testcase}=${EMPTY}
${name}= BuiltIn.Evaluate """${SUITE_NAME}""".replace(" ","-").replace("/","-").replace(".","-")
${suffix}= BuiltIn.Set_Variable_If '${testcase}' != '' --${testcase} ${EMPTY}
- [Return] ${testtool}--${name}${suffix}.log
+ ${date}= DateTime.Get Current Date
+ ${timestamp}= DateTime.Convert Date ${date} epoch
+ RETURN ${testtool}--${name}${suffix}.${timestamp}.log
Set_User_Configurable_Variable_Default
- [Arguments] ${name} ${value}
[Documentation] Set a default value for an user configurable variable.
... This keyword is needed if your default value is calculated using
... a complex expression which needs BuiltIn.Evaluate or even more
... set by another keyword will silently turn the call into a NOP and
... thus is a bug in the suite or resource trying to call this
... keyword.
+ [Arguments] ${name} ${value}
# TODO: Figure out how to make the ${value} evaluation "lazy" (meaning
# evaluating it only when the user did not set anything and thus the
# default is needed). This might be needed to avoid potentially costly
BuiltIn.Set_Suite_Variable \${${name}} ${value}
Convert_To_Minutes
- [Arguments] ${time}
[Documentation] Convert a Robot time string to an integer expressing the time in minutes, rounded up
... This is a wrapper around DateTime.Convert_Time which does not
... provide this functionality directly nor is even able to produce
... an integer directly. It is needed for RestPerfClient which
... cannot accept floats for its --timeout parameter and interprets
... the value supplied in this parameter in minutes.
+ [Arguments] ${time}
${seconds}= DateTime.Convert_Time ${time} result_format=number
${minutes}= BuiltIn.Evaluate int(math.ceil(${seconds}/60.0)) modules=math
- [Return] ${minutes}
+ RETURN ${minutes}
Write Commands Until Expected Prompt
- [Arguments] ${cmd} ${prompt} ${timeout}=30s
[Documentation] quick wrapper for Write and Read Until Prompt Keywords to make test cases more readable
+ [Arguments] ${cmd} ${prompt} ${timeout}=${DEFAULT_TIMEOUT}
+ BuiltIn.Log cmd: ${cmd}
SSHLibrary.Set Client Configuration timeout=${timeout}
SSHLibrary.Read
SSHLibrary.Write ${cmd}
${output}= SSHLibrary.Read Until ${prompt}
- [Return] ${output}
+ RETURN ${output}
+
+Write Commands Until Expected Regexp
+ [Documentation] quick wrapper for Write and Read Until Prompt Keywords to make test cases more readable
+ [Arguments] ${cmd} ${regexp} ${timeout}=${DEFAULT_TIMEOUT}
+ BuiltIn.Log cmd: ${cmd}
+ SSHLibrary.Set Client Configuration timeout=${timeout}
+ SSHLibrary.Read
+ SSHLibrary.Write ${cmd}
+ ${output}= SSHLibrary.Read Until Regexp ${regexp}
+ RETURN ${output}
Install Package On Ubuntu System
- [Arguments] ${package_name} ${system}=${TOOLS_SYSTEM_IP} ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=30s
[Documentation] Keyword to install packages for testing to Ubuntu Mininet VM
+ [Arguments] ${package_name} ${system}=${TOOLS_SYSTEM_IP} ${user}=${TOOLS_SYSTEM_USER} ${password}=${TOOLS_SYSTEM_PASSWORD} ${prompt}=${DEFAULT_LINUX_PROMPT} ${prompt_timeout}=30s
Log Keyword to install package to Mininet Ubuntu VM
Open Connection ${system} prompt=${prompt} timeout=${prompt_timeout}
- Flexible Mininet Login user=${user} password=${password}
+ SSHKeywords.Flexible Mininet Login user=${user} password=${password}
Write sudo apt-get install -y ${package_name}
Read Until ${prompt}
Json Parse From String
- [Arguments] ${plain_string_with_json}
[Documentation] Parse given plain string into json (dictionary)
- ${json_data} Evaluate json.loads('''${plain_string_with_json}''') json
- [Return] ${json_data}
+ [Arguments] ${plain_string_with_json}
+ ${json_data}= Evaluate json.loads('''${plain_string_with_json}''') json
+ RETURN ${json_data}
Json Parse From File
- [Arguments] ${json_file}
[Documentation] Parse given file content into json (dictionary)
- ${json_plain_string} Get file ${json_file}
- ${json_data} Json Parse From String ${json_plain_string}
- [Return] ${json_data}
+ [Arguments] ${json_file}
+ ${json_plain_string}= OperatingSystem.Get file ${json_file}
+ ${json_data}= Json Parse From String ${json_plain_string}
+ RETURN ${json_data}
+
+Modify Iptables On Remote System
+ [Documentation] Wrapper keyword to run iptables with any given ${iptables_rule} string on the remote system given
+ ... by ${remote_system_ip}. The iptables listing will be output before and after the command is run
+ [Arguments] ${remote_system_ip} ${iptables_rule} ${user}=${ODL_SYSTEM_USER} ${password}=${ODL_SYSTEM_PASSWORD} ${prompt}=${ODL_SYSTEM_PROMPT}
+ ${list_iptables_command}= BuiltIn.Set Variable sudo /sbin/iptables -L -n
+ ${output}= Utils.Run Command On Remote System
+ ... ${remote_system_ip}
+ ... ${list_iptables_command}
+ ... ${user}
+ ... ${password}
+ ... prompt=${prompt}
+ BuiltIn.Log ${output}
+ Utils.Run Command On Remote System
+ ... ${remote_system_ip}
+ ... sudo /sbin/iptables ${iptables_rule}
+ ... ${user}
+ ... ${password}
+ ... prompt=${prompt}
+ ${output}= Utils.Run Command On Remote System
+ ... ${remote_system_ip}
+ ... ${list_iptables_command}
+ ... ${user}
+ ... ${password}
+ ... prompt=${prompt}
+ BuiltIn.Log ${output}
+
+Get_Sysstat_Statistics
+ [Documentation] Store current connection index, open new connection to ip_address. Run command to get sysstat results from script,
+ ... which is running on all children nodes. Returns cpu, network, memory usage statistics from the node for each 10 minutes
+ ... that node was running. Used for debug purposes. Returns whole output of sysstat.
+ [Arguments] ${ip_address}=${ODL_SYSTEM_IP}
+ ${current_connection}= SSHLibrary.Get_Connection
+ SSHKeywords.Open_Connection_To_ODL_System ${ip_address}
+ SSHLibrary.Write sar -A -f /var/log/sa/sa*
+ ${output}= SSHLibrary.Read_Until_Prompt
+ BuiltIn.Log ${output}
+ SSHLibrary.Close_Connection
+ RETURN ${output}
+ [Teardown] SSHKeywords.Restore_Current_SSH_Connection_From_Index ${current_connection.index}
+
+Check Diagstatus
+ [Documentation] GET http://${ip_address}:${RESTCONFPORT}/diagstatus and return the response. ${check_status}
+ ... and ${expected_status_code} can be used to ignore the status code, or validate any status code value.
+ ... By default, this keyword will pass if the status code returned is 200, and fail otherwise.
+ [Arguments] ${ip_address}=${ODL_SYSTEM_IP} ${check_status}=True ${expected_status}=${200}
+ RequestsLibrary.Create Session diagstatus_session http://${ip_address}:${RESTCONFPORT}
+ ${resp}= RequestsLibrary.Get On Session diagstatus_session url=/diagstatus
+ IF "${check_status}" == "True"
+ BuiltIn.Should Be Equal As Strings ${resp.status_code} ${expected_status}
+ END
+ RETURN ${resp}
Code Review / integration / test.git / blobdiff