*** Settings ***
-Documentation BGP performance of ingesting from 1 iBGP peer, data change counter is NOT used.
+Documentation BGP performance of ingesting from 1 iBGP peer, data change counter is NOT used.
...
-... Copyright (c) 2015-2017 Cisco Systems, Inc. and others. All rights reserved.
+... Copyright (c) 2015-2017 Cisco Systems, Inc. and others. All rights reserved.
...
-... This program and the accompanying materials are made available under the
-... terms of the Eclipse Public License v1.0 which accompanies this distribution,
-... and is available at http://www.eclipse.org/legal/epl-v10.html
+... This program and the accompanying materials are made available under the
+... terms of the Eclipse Public License v1.0 which accompanies this distribution,
+... and is available at http://www.eclipse.org/legal/epl-v10.html
...
-... This suite uses play.py as single iBGP peer which talks to
-... single controller in three node cluster configuration.
-... Test suite checks changes of the the example-ipv4-topology on all nodes.
-... RIB is not examined.
+... This suite uses play.py as single iBGP peer which talks to
+... single controller in three node cluster configuration.
+... Test suite checks changes of the the example-ipv4-topology on all nodes.
+... RIB is not examined.
...
-... singlepeer_pc_shm_300kroutes:
-... pc - prefix counting
-... shm - shard monitoring (during the process of prefix advertizing)
-Suite Setup PrefixcountKeywords.Setup_Everything
-Suite Teardown PrefixcountKeywords.Teardown_Everything
-Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing
-Test Teardown SetupUtils.Teardown_Test_Show_Bugs_And_Start_Fast_Failing_If_Test_Failed
-Library SSHLibrary timeout=10s
-Library RequestsLibrary
-Resource ${CURDIR}/../../../variables/Variables.robot
-Resource ${CURDIR}/../../../libraries/BGPSpeaker.robot
-Resource ${CURDIR}/../../../libraries/BGPcliKeywords.robot
-Resource ${CURDIR}/../../../libraries/FailFast.robot
-Resource ${CURDIR}/../../../libraries/KillPythonTool.robot
-Resource ${CURDIR}/../../../libraries/PrefixCounting.robot
-Resource ${CURDIR}/../../../libraries/SetupUtils.robot
-Resource ${CURDIR}/../../../libraries/ClusterManagement.robot
-Resource ${CURDIR}/../../../libraries/SSHKeywords.robot
-Resource ${CURDIR}/../../../libraries/TemplatedRequests.robot
-Resource ${CURDIR}/PrefixcountKeywords.robot
+... singlepeer_pc_shm_300kroutes:
+... pc - prefix counting
+... shm - shard monitoring (during the process of prefix advertizing)
+
+Library SSHLibrary timeout=10s
+Library RequestsLibrary
+Resource ${CURDIR}/../../../variables/Variables.robot
+Resource ${CURDIR}/../../../libraries/BGPSpeaker.robot
+Resource ${CURDIR}/../../../libraries/BGPcliKeywords.robot
+Resource ${CURDIR}/../../../libraries/FailFast.robot
+Resource ${CURDIR}/../../../libraries/KillPythonTool.robot
+Resource ${CURDIR}/../../../libraries/PrefixCounting.robot
+Resource ${CURDIR}/../../../libraries/SetupUtils.robot
+Resource ${CURDIR}/../../../libraries/ClusterManagement.robot
+Resource ${CURDIR}/../../../libraries/SSHKeywords.robot
+Resource ${CURDIR}/../../../libraries/TemplatedRequests.robot
+Resource ${CURDIR}/PrefixcountKeywords.robot
+
+Suite Setup PrefixcountKeywords.Setup_Everything
+Suite Teardown PrefixcountKeywords.Teardown_Everything
+Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing
+Test Teardown SetupUtils.Teardown_Test_Show_Bugs_And_Start_Fast_Failing_If_Test_Failed
+
*** Variables ***
-${COUNT} 300000
+${COUNT} 300000
+
*** Test Cases ***
Get Example Bgp Rib Owner
[Documentation] Find an odl node which is able to accept incomming connection. It is a node, which is the owner of bgp rib, as it is a singleton service.
... This node should be used for bgp peer to connect to.
- ${rib_owner} ${rib_candidates}= ClusterManagement.Get_Owner_And_Successors_For_device example-bgp-rib Bgpcep 1
+ ${rib_owner} ${rib_candidates} ClusterManagement.Get_Owner_And_Successors_For_device
+ ... example-bgp-rib
+ ... Bgpcep
+ ... 1
BuiltIn.Set_Suite_Variable ${rib_owner} ${rib_owner}
BuiltIn.Set_Suite_Variable ${rib_owner_node_id} ${ODL_SYSTEM_${rib_owner}_IP}
- ${session} = ClusterManagement.Resolve_Http_Session_For_Member ${rib_owner}
+ ${session} ClusterManagement.Resolve_Http_Session_For_Member ${rib_owner}
BuiltIn.Set_Suite_Variable ${config_session} ${session}
Check_For_Empty_Ipv4_Topology_Before_Talking
[Tags] critical
[Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
FOR ${member_index} IN @{pc_all_indices}
- BuiltIn.Wait_Until_Keyword_Succeeds ${INITIAL_RESTCONF_TIMEOUT} 1s PrefixCounting.Check_Ipv4_Topology_Is_Empty session=${operational_${member_index}} topology=${EXAMPLE_IPV4_TOPOLOGY}
+ BuiltIn.Wait_Until_Keyword_Succeeds
+ ... ${INITIAL_RESTCONF_TIMEOUT}
+ ... 1s
+ ... PrefixCounting.Check_Ipv4_Topology_Is_Empty
+ ... session=${operational_${member_index}}
+ ... topology=${EXAMPLE_IPV4_TOPOLOGY}
END
Reconfigure_ODL_To_Accept_Connection
[Documentation] Configure BGP peer module with initiate-connection set to false.
[Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
- &{mapping} BuiltIn.Create_Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} HOLDTIME=${HOLDTIME} PEER_PORT=${BGP_TOOL_PORT}
- ... INITIATE=false BGP_RIB=${RIB_INSTANCE} PASSIVE_MODE=true BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
- TemplatedRequests.Put_As_Json_Templated ${BGP_VARIABLES_FOLDER} mapping=${mapping} session=${config_session}
+ &{mapping} BuiltIn.Create_Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... BGP_NAME=${BGP_PEER_NAME}
+ ... IP=${TOOLS_SYSTEM_IP}
+ ... HOLDTIME=${HOLDTIME}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... INITIATE=false
+ ... BGP_RIB=${RIB_INSTANCE}
+ ... PASSIVE_MODE=true
+ ... BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
+ TemplatedRequests.Put_As_Json_Templated
+ ... ${BGP_VARIABLES_FOLDER}
+ ... mapping=${mapping}
+ ... session=${config_session}
[Teardown] SetupUtils.Teardown_Test_Show_Bugs_If_Test_Failed
Start_Talking_BGP_Speaker
Wait_For_Stable_Talking_Ipv4_Topology
[Documentation] Wait until ${EXAMPLE_IPV4_TOPOLOGY} becomes stable. This is done by checking stability of prefix count as seen from all nodes.
FOR ${member_index} IN @{pc_all_indices}
- PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD} repetitions=${REPETITIONS} excluded_count=0 session=${operational_${member_index}}
- ... topology=${EXAMPLE_IPV4_TOPOLOGY} shards_list=${SHARD_MONITOR_LIST} shards_details=${init_shard_details}
+ PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable
+ ... timeout=${bgp_filling_timeout}
+ ... period=${CHECK_PERIOD}
+ ... repetitions=${REPETITIONS}
+ ... excluded_count=0
+ ... session=${operational_${member_index}}
+ ... topology=${EXAMPLE_IPV4_TOPOLOGY}
+ ... shards_list=${SHARD_MONITOR_LIST}
+ ... shards_details=${init_shard_details}
END
Check_Talking_Ipv4_Topology_Count
[Tags] critical
[Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
FOR ${member_index} IN @{pc_all_indices}
- PrefixCounting.Check_Ipv4_Topology_Count ${COUNT} session=${operational_${member_index}} topology=${EXAMPLE_IPV4_TOPOLOGY}
+ PrefixCounting.Check_Ipv4_Topology_Count
+ ... ${COUNT}
+ ... session=${operational_${member_index}}
+ ... topology=${EXAMPLE_IPV4_TOPOLOGY}
END
Kill_Talking_BGP_Speaker
[Documentation] Wait until ${EXAMPLE_IPV4_TOPOLOGY} becomes stable again as seen from node 1.
[Tags] critical
FOR ${member_index} IN @{pc_all_indices}
- PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_filling_timeout} period=${CHECK_PERIOD} repetitions=${REPETITIONS} excluded_count=${COUNT} session=${operational_${member_index}}
+ PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable
+ ... timeout=${bgp_filling_timeout}
+ ... period=${CHECK_PERIOD}
+ ... repetitions=${REPETITIONS}
+ ... excluded_count=${COUNT}
+ ... session=${operational_${member_index}}
... topology=${EXAMPLE_IPV4_TOPOLOGY}
END
[Tags] critical
[Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
FOR ${member_index} IN @{pc_all_indices}
- PrefixCounting.Check_Ipv4_Topology_Is_Empty session=${operational_${member_index}} topology=${EXAMPLE_IPV4_TOPOLOGY}
+ PrefixCounting.Check_Ipv4_Topology_Is_Empty
+ ... session=${operational_${member_index}}
+ ... topology=${EXAMPLE_IPV4_TOPOLOGY}
END
Delete_Bgp_Peer_Configuration
[Documentation] Revert the BGP configuration to the original state: without any configured peers.
[Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
- &{mapping} BuiltIn.Create_Dictionary DEVICE_NAME=${DEVICE_NAME} BGP_NAME=${BGP_PEER_NAME} IP=${TOOLS_SYSTEM_IP} HOLDTIME=${HOLDTIME} PEER_PORT=${BGP_TOOL_PORT}
- ... INITIATE=false BGP_RIB=${RIB_INSTANCE} BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
+ &{mapping} BuiltIn.Create_Dictionary
+ ... DEVICE_NAME=${DEVICE_NAME}
+ ... BGP_NAME=${BGP_PEER_NAME}
+ ... IP=${TOOLS_SYSTEM_IP}
+ ... HOLDTIME=${HOLDTIME}
+ ... PEER_PORT=${BGP_TOOL_PORT}
+ ... INITIATE=false
+ ... BGP_RIB=${RIB_INSTANCE}
+ ... BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER} mapping=${mapping} session=${config_session}
Code Review / integration / test.git / blobdiff