*** Settings ***
Documentation Collection of test cases to validate OVSDB projects bugs.
-... - https://bugs.opendaylight.org/show_bug.cgi?id=4794
-... - https://bugs.opendaylight.org/show_bug.cgi?id=5177
+... - https://bugs.opendaylight.org/show_bug.cgi?id=5221
+... - https://bugs.opendaylight.org/show_bug.cgi?id=5177
+... - https://bugs.opendaylight.org/show_bug.cgi?id=4794
Suite Setup OVSDB Connection Manager Suite Setup
Suite Teardown OVSDB Connection Manager Suite Teardown
Test Setup Log Testcase Start To Controller Karaf
${OVSDB_CONFIG_DIR} ${CURDIR}/../../../variables/ovsdb
*** Test Cases ***
+Bug 5221
+ [Documentation] In the case that an ovs node is rebooted, or the ovs service is
+ ... otherwise restarted, a controller initiated connection should reconnect when
+ ... the ovs is ready and available.
+ [Setup] Clean OVSDB Test Environment
+ Run Command On Remote System ${TOOLS_SYSTEM_IP} sudo ovs-vsctl set-manager ptcp:${OVSDB_PORT}
+ Connect Controller To OVSDB Node
+ @{list} Create List ovsdb://${TOOLS_SYSTEM_IP}:${OVSDB_PORT}
+ Wait Until Keyword Succeeds 8s 2s Check For Elements At URI ${OPERATIONAL_TOPO_API}/topology/ovsdb:1 ${list}
+ Create Bridge ovsdb:%2F%2F${TOOLS_SYSTEM_IP}:${OVSDB_PORT} ${BRIDGE}
+ @{list} Create List ovsdb://${TOOLS_SYSTEM_IP}:${OVSDB_PORT}/bridge/${BRIDGE}
+ Wait Until Keyword Succeeds 8s 2s Check For Elements At URI ${OPERATIONAL_TOPO_API}/topology/ovsdb:1 ${list}
+ Run Command On Remote System ${TOOLS_SYSTEM_IP} sudo /usr/share/openvswitch/scripts/ovs-ctl stop
+ Wait Until Keyword Succeeds 8s 2s Check For Elements Not At URI ${OPERATIONAL_TOPO_API}/topology/ovsdb:1 ${list}
+ Run Command On Remote System ${TOOLS_SYSTEM_IP} sudo /usr/share/openvswitch/scripts/ovs-ctl start
+ Wait Until Keyword Succeeds 8s 2s Check For Elements At URI ${OPERATIONAL_TOPO_API}/topology/ovsdb:1 ${list}
+ [Teardown] Run Keywords Clean OVSDB Test Environment
+ ... AND Report_Failure_Due_To_Bug 5221
+
Bug 5177
[Documentation] This test case will recreate the bug using the same basic steps as
... provided in the bug, and noted here:
... 1) create bridge in config using the UUID determined in Suite Setup
... 2) connect ovs (vsctl set-manager)
... 3) Fail if node is not discovered in Operational Store
- Create Bridge
+ ${node} Set Variable ovsdb:%2F%2Fuuid%2F${ovsdb_uuid}
+ Create Bridge ${node} ${BRIDGE}
${resp} RequestsLibrary.Get Request session ${CONFIG_TOPO_API}
Log ${resp.content}
Should Be Equal As Strings ${resp.status_code} 200 Response status code error
- Should Contain ${resp.content} ovsdb://uuid/${ovsdb_uuid}/bridge/${BRIDGE}
+ Should Contain ${resp.content} ${node}/bridge/${BRIDGE}
Run Command On Remote System ${TOOLS_SYSTEM_IP} sudo ovs-vsctl set-manager tcp:${ODL_SYSTEM_IP}:6640
@{list} Create List ${BRIDGE}
Wait Until Keyword Succeeds 8s 2s Check For Elements At URI ${OPERATIONAL_TOPO_API}/topology/ovsdb:1 ${list}
- [Teardown] Report_Failure_Due_To_Bug 5177
+ [Teardown] Run Keywords Clean OVSDB Test Environment
+ ... AND Report_Failure_Due_To_Bug 5177
Bug 4794
[Documentation] This test is dependent on the work done in the Bug 5177 test case so should
... always be executed immediately after.
... 1) delete bridge in config
... 2) Poll and Fail if exception is seen in karaf.log
- ${resp} RequestsLibrary.Delete Request session ${SOUTHBOUND_CONFIG_API}%2Fbridge%2F${BRIDGE}
+ ${node} Set Variable ovsdb://uuid/${ovsdb_uuid}
+ ${resp} RequestsLibrary.Delete Request session ${CONFIG_TOPO_API}/topology/ovsdb:1/node/${node}%2Fbridge%2F${BRIDGE}
Should Be Equal As Strings ${resp.status_code} 200 Response status code error
Run Command On Remote System ${TOOLS_SYSTEM_IP} sudo ovs-vsctl del-manager
# If the exception is seen in karaf.log within 10s, the following line will FAIL, which is the point.
- Verify_Keyword_Does_Not_Fail_Within_Timeout 10s 1s
- ... Check Karaf Log File Does Not Have Messages ${ODL_SYSTEM_IP} Shard.*shard-topology-operational An exception occurred while preCommitting transaction
- [Teardown] Report_Failure_Due_To_Bug 4794
+ Verify_Keyword_Does_Not_Fail_Within_Timeout 10s 1s Check Karaf Log File Does Not Have Messages ${ODL_SYSTEM_IP} Shard.*shard-topology-operational An exception occurred while preCommitting transaction
+ # TODO: Bug 5178
+ [Teardown] Run Keywords Clean OVSDB Test Environment
+ ... AND Report_Failure_Due_To_Bug 4794
*** Keywords ***
OVSDB Connection Manager Suite Setup
OVSDB Connection Manager Suite Teardown
[Documentation] Cleans up test environment, close existing sessions.
Clean OVSDB Test Environment ${TOOLS_SYSTEM_IP}
- RequestsLibrary.Delete Request session ${CONFIG_TOPO_API}/topology/ovsdb:1/node/ovsdb:%2F%2Fuuid%2F${ovsdb_uuid}%2Fbridge%2F${BRIDGE}
+ # Best effort to clean config store, by deleting all the types of nodes that are used in this suite
+ ${node} Set Variable ovsdb:%2F%2Fuuid%2F${ovsdb_uuid}
+ RequestsLibrary.Delete Request session ${CONFIG_TOPO_API}/topology/ovsdb:1/node/${node}
+ RequestsLibrary.Delete Request session ${CONFIG_TOPO_API}/topology/ovsdb:1/node/${node}%2Fbridge%2F${BRIDGE}
+ ${node} Set Variable ovsdb:%2F%2F${TOOLS_SYSTEM_IP}:${OVSDB_PORT}
+ RequestsLibrary.Delete Request session ${CONFIG_TOPO_API}/topology/ovsdb:1/node/${node}
+ RequestsLibrary.Delete Request session ${CONFIG_TOPO_API}/topology/ovsdb:1/node/${node}%2Fbridge%2F${BRIDGE}
${resp} RequestsLibrary.Get Request session ${CONFIG_TOPO_API}
Log ${resp.content}
Delete All Sessions
+ # TODO: both Create Bridge and Connect Controller To OVSDB Node keywords below should be moved to a library
+ # and all the suites using this kind of work can move to using the library instead of
+ # doing all this work each time.
Create Bridge
+ [Arguments] ${node} ${bridge}
[Documentation] This will create bridge on the specified OVSDB node.
${body} OperatingSystem.Get File ${OVSDB_CONFIG_DIR}/create_bridge.json
- ${body} Replace String ${body} ovsdb://127.0.0.1:61644 ovsdb://uuid/${ovsdb_uuid}
+ ${body} Replace String ${body} ovsdb://127.0.0.1:61644 ovsdb://209.132.179.50:6634
${body} Replace String ${body} tcp:127.0.0.1:6633 tcp:${ODL_SYSTEM_IP}:6640
${body} Replace String ${body} 127.0.0.1 ${TOOLS_SYSTEM_IP}
- ${body} Replace String ${body} br01 ${BRIDGE}
+ ${body} Replace String ${body} br01 ${bridge}
${body} Replace String ${body} 61644 ${OVSDB_PORT}
- ${uri}= Set Variable ${CONFIG_TOPO_API}/topology/ovsdb:1/node/ovsdb:%2F%2Fuuid%2F${ovsdb_uuid}%2Fbridge%2F${BRIDGE}
+ ${uri}= Set Variable ${CONFIG_TOPO_API}/topology/ovsdb:1/node/${node}%2Fbridge%2F${bridge}
Log URL is ${uri}
Log data: ${body}
${resp} RequestsLibrary.Put Request session ${uri} data=${body}
Should Be Equal As Strings ${resp.status_code} 200
+
+Connect Controller To OVSDB Node
+ [Documentation] Initiate the connection to OVSDB node from controller
+ ${sample} OperatingSystem.Get File ${OVSDB_CONFIG_DIR}/connect.json
+ ${sample1} Replace String ${sample} 127.0.0.1 ${TOOLS_SYSTEM_IP}
+ ${body} Replace String ${sample1} 61644 ${OVSDB_PORT}
+ Log data: ${body}
+ ${resp} RequestsLibrary.Put Request session ${CONFIG_TOPO_API}/topology/ovsdb:1/node/ovsdb:%2F%2F${TOOLS_SYSTEM_IP}:${OVSDB_PORT} data=${body}
+ Log ${resp.content}
+ Should Be Equal As Strings ${resp.status_code} 200
+ Wait Until Keyword Succeeds 3s 1s Verify OVS Reports Connected
+
Code Review / integration / test.git / commitdiff