SxpLib.Add Node ${DEVICE_NODE_ID} ip=0.0.0.0 session=${DEVICE_SESSION}
BuiltIn.Wait Until Keyword Succeeds 20 1 SxpLib.Check Node Started ${DEVICE_NODE_ID} session=${DEVICE_SESSION} system=${TOOLS_SYSTEM_IP}
... ip=${EMPTY}
- ${cluster_mode} Sxp.Get Opposing Mode ${peer_mode}
+ ${cluster_mode} = Sxp.Get Opposing Mode ${peer_mode}
: FOR ${i} IN RANGE ${NUM_ODL_SYSTEM}
\ SxpLib.Add Connection version4 ${peer_mode} ${ODL_SYSTEM_${i+1}_IP} 64999 ${DEVICE_NODE_ID}
\ ... session=${DEVICE_SESSION}
- ${controller_id} Get Any Controller
+ ${controller_id} = Get Any Controller
SxpLib.Add Node ${CLUSTER_NODE_ID} ip=0.0.0.0 session=controller${controller_id}
BuiltIn.Wait Until Keyword Succeeds 20 1 Check Cluster Node started ${CLUSTER_NODE_ID}
SxpLib.Add Connection version4 ${cluster_mode} ${TOOLS_SYSTEM_IP} 64999 ${CLUSTER_NODE_ID} session=controller${controller_id}
ClusterManagement.Flush_Iptables_From_List_Or_All
: FOR ${i} IN RANGE ${NUM_ODL_SYSTEM}
\ BuiltIn.Wait Until Keyword Succeeds 240 1 ClusterManagement.Sync_Status_Should_Be_True ${i+1}
- ${controller_index} Get Active Controller
+ ${controller_index} = Get Active Controller
SxpLib.Delete Node ${DEVICE_NODE_ID} session=${DEVICE_SESSION}
SxpLib.Delete Node ${CLUSTER_NODE_ID} session=controller${controller_index}
Check Cluster Node started
[Arguments] ${node} ${port}=64999 ${ip}=${EMPTY}
[Documentation] Verify that SxpNode has data written to Operational datastore and Node is running on one of cluster nodes
- ${started} BuiltIn.Set Variable ${False}
+ ${started} = BuiltIn.Set Variable ${False}
: FOR ${i} IN RANGE ${NUM_ODL_SYSTEM}
- \ ${rc} Utils.Run Command On Remote System ${ODL_SYSTEM_${i+1}_IP} netstat -tln | grep -q ${ip}:${port} && echo 0 || echo 1 ${ODL_SYSTEM_USER} ${ODL_SYSTEM_PASSWORD}
+ \ ${rc} = Utils.Run Command On Remote System ${ODL_SYSTEM_${i+1}_IP} netstat -tln | grep -q ${ip}:${port} && echo 0 || echo 1 ${ODL_SYSTEM_USER} ${ODL_SYSTEM_PASSWORD}
\ ... prompt=${ODL_SYSTEM_PROMPT}
- \ ${started} BuiltIn.Set Variable If '${rc}' == '0' ${True} ${started}
+ \ ${started} = BuiltIn.Set Variable If '${rc}' == '0' ${True} ${started}
BuiltIn.Should Be True ${started}
Check Device is Connected
[Arguments] ${node} ${version}=version4 ${port}=64999 ${session}=session
[Documentation] Checks if SXP device is connected to at least one cluster node
- ${is_connected} BuiltIn.Set Variable ${False}
- ${resp} SxpLib.Get Connections node=${node} session=${session}
+ ${is_connected} = BuiltIn.Set Variable ${False}
+ ${resp} = SxpLib.Get Connections node=${node} session=${session}
: FOR ${i} IN RANGE ${NUM_ODL_SYSTEM}
- \ ${follower} Sxp.Find Connection ${resp} ${version} any ${ODL_SYSTEM_${i+1}_IP}
+ \ ${follower} = Sxp.Find Connection ${resp} ${version} any ${ODL_SYSTEM_${i+1}_IP}
\ ... ${port} on
- \ ${is_connected} BuiltIn.Run Keyword If ${follower} BuiltIn.Set Variable ${True}
+ \ ${is_connected} = BuiltIn.Run Keyword If ${follower} BuiltIn.Set Variable ${True}
\ ... ELSE BuiltIn.Set Variable ${is_connected}
BuiltIn.Should Be True ${is_connected}
Check Cluster is Connected
[Arguments] ${node} ${version}=version4 ${port}=64999 ${mode}=speaker ${session}=session
[Documentation] Checks if SXP device is connected to at least one cluster node
- ${resp} SxpLib.Get Connections node=${node} session=${session}
+ ${resp} = SxpLib.Get Connections node=${node} session=${session}
SxpLib.Should Contain Connection ${resp} ${TOOLS_SYSTEM_IP} ${port} ${mode} ${version}
Get Active Controller
[Documentation] Find cluster controller that is marked as leader for SXP service in cluster
- @{votes} BuiltIn.Create List
+ @{votes} = BuiltIn.Create List
: FOR ${i} IN RANGE ${NUM_ODL_SYSTEM}
- \ ${resp} RequestsLibrary.Get Request controller${i+1} /restconf/operational/entity-owners:entity-owners
+ \ ${resp} = RequestsLibrary.Get Request controller${i+1} /restconf/operational/entity-owners:entity-owners
\ BuiltIn.Continue For Loop If ${resp.status_code} != 200
- \ ${controller} Sxp.Get Active Controller From Json ${resp.content} SxpControllerInstance
+ \ ${controller} = Sxp.Get Active Controller From Json ${resp.content} SxpControllerInstance
\ Collections.Append To List ${votes} ${controller}
- ${length} BuiltIn.Get Length ${votes}
+ ${length} = BuiltIn.Get Length ${votes}
BuiltIn.Should Not Be Equal As Integers ${length} 0
- ${active_controller} BuiltIn.Evaluate collections.Counter(${votes}).most_common(1)[0][0] collections
+ ${active_controller} = BuiltIn.Evaluate collections.Counter(${votes}).most_common(1)[0][0] collections
[Return] ${active_controller}
Get Inactive Controller
[Documentation] Find cluster controller that is not marked as leader for SXP service in cluster
- ${active_controller} Get Active Controller
- ${controller} BuiltIn.Evaluate random.choice( filter( lambda i: i!=${active_controller}, range(1, ${NUM_ODL_SYSTEM} + 1))) random
+ ${active_controller} = Get Active Controller
+ ${controller} = BuiltIn.Evaluate random.choice( filter( lambda i: i!=${active_controller}, range(1, ${NUM_ODL_SYSTEM} + 1))) random
[Return] ${controller}
Get Any Controller
[Documentation] Get any controller from cluster range
- ${follower} BuiltIn.Evaluate random.choice( range(1, ${NUM_ODL_SYSTEM} + 1)) random
+ ${follower} = BuiltIn.Evaluate random.choice( range(1, ${NUM_ODL_SYSTEM} + 1)) random
[Return] ${follower}
Map Followers To Mac Addresses
[Documentation] Creates Map containing ODL_SYSTEM_IP to corresponding MAC-ADDRESS
- ${mac_addresses} BuiltIn.Create dictionary
+ ${mac_addresses} = BuiltIn.Create dictionary
: FOR ${i} IN RANGE ${NUM_ODL_SYSTEM}
\ ${mac_address} Find Mac Address Of Ip Address ${ODL_SYSTEM_${i+1}_IP}
\ Collections.Set To Dictionary ${mac_addresses} ${ODL_SYSTEM_${i+1}_IP} ${mac_address}
Find Mac Address Of Ip Address
[Arguments] ${ip}
[Documentation] Finds out MAC-ADDRESS of specified IP by pinging it from TOOLS_SYSTEM machine
- ${mac_address} Utils.Run Command On Remote System ${TOOLS_SYSTEM_IP} ping -c 1 -W 1 ${ip} >/dev/null && arp -n | grep ${ip} | awk '{print $3}' ${TOOLS_SYSTEM_USER} ${TOOLS_SYSTEM_PASSWORD}
+ ${mac_address} = Utils.Run Command On Remote System ${TOOLS_SYSTEM_IP} ping -c 1 -W 1 ${ip} >/dev/null && arp -n | grep ${ip} | awk '{print $3}' ${TOOLS_SYSTEM_USER} ${TOOLS_SYSTEM_PASSWORD}
[Return] ${mac_address}
Ip Addres Should Not Be Routed To Follower
[Arguments] ${mac_addresses} ${ip_address} ${follower_index}
[Documentation] Verify that IP-ADDRESS is not routed to follower specified by ID
- ${mac_address_assigned} Collections.Get From Dictionary ${mac_addresses} ${ODL_SYSTEM_${follower_index}_IP}
- ${mac_address_resolved} Find Mac Address Of Ip Address ${ip_address}
+ ${mac_address_assigned} = Collections.Get From Dictionary ${mac_addresses} ${ODL_SYSTEM_${follower_index}_IP}
+ ${mac_address_resolved} = Find Mac Address Of Ip Address ${ip_address}
BuiltIn.Should Not Be Equal As Strings ${mac_address_assigned} ${mac_address_resolved}
Ip Addres Should Be Routed To Follower
[Arguments] ${mac_addresses} ${ip_address} ${follower_index}
[Documentation] Verify that IP-ADDRESS is routed to follower specified by ID
- ${mac_address_assigned} Collections.Get From Dictionary ${mac_addresses} ${ODL_SYSTEM_${follower_index}_IP}
- ${mac_address_resolved} Find Mac Address Of Ip Address ${ip_address}
+ ${mac_address_assigned} = Collections.Get From Dictionary ${mac_addresses} ${ODL_SYSTEM_${follower_index}_IP}
+ ${mac_address_resolved} = Find Mac Address Of Ip Address ${ip_address}
BuiltIn.Should Not Be Empty ${mac_address_resolved}
BuiltIn.Should Be Equal As Strings ${mac_address_assigned} ${mac_address_resolved}
Shutdown Tools Node
[Arguments] ${ip_address}=${TOOLS_SYSTEM_2_IP} ${user}=${TOOLS_SYSTEM_USER} ${passwd}=${TOOLS_SYSTEM_PASSWORD}
[Documentation] Shutdown Tools node to avoid conflict in resolving virtual ip that is overlaping that node.
- ${rc} OperatingSystem.Run And Return Rc ping -q -c 3 ${ip_address}
- ${stdout} BuiltIn.Run Keyword And Return If ${rc} == 0 Utils.Run Command On Remote System ${ip_address} sudo shutdown -P 0 ${user}
+ ${rc} = OperatingSystem.Run And Return Rc ping -q -c 3 ${ip_address}
+ ${stdout} = BuiltIn.Run Keyword And Return If ${rc} == 0 Utils.Run Command On Remote System ${ip_address} sudo shutdown -P 0 ${user}
... ${passwd}
BuiltIn.Log ${stdout}
*** Test Cases ***
Route Definition Test
[Documentation] Test Route update mechanism without cluster node isolation
- Check Shards Status
- ${active_controller} Get Active Controller
- Wait Until Keyword Succeeds 240 1 Ip Addres Should Not Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP_1} ${active_controller}
+ SxpClusterLib.Check Shards Status
+ ${active_controller} = SxpClusterLib.Get Active Controller
+ BuiltIn.Wait Until Keyword Succeeds 240 1 SxpClusterLib.Ip Addres Should Not Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP_1} ${active_controller}
Add Route Definition To Cluster ${VIRTUAL_IP_1} ${VIRTUAL_IP_MASK_1} ${VIRTUAL_INTERFACE_1} ${active_controller}
- Wait Until Keyword Succeeds 240 1 Ip Addres Should Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP_1} ${active_controller}
- Clean Routing Configuration To Controller controller${active_controller}
- Wait Until Keyword Succeeds 240 1 Ip Addres Should Not Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP_1} ${active_controller}
+ BuiltIn.Wait Until Keyword Succeeds 240 1 SxpClusterLib.Ip Addres Should Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP_1} ${active_controller}
+ SxpLib.Clean Routing Configuration To Controller controller${active_controller}
+ BuiltIn.Wait Until Keyword Succeeds 240 1 SxpClusterLib.Ip Addres Should Not Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP_1} ${active_controller}
Put Route Definition To Cluster ${VIRTUAL_IP_1} ${VIRTUAL_IP_MASK_1} ${VIRTUAL_INTERFACE_1} ${active_controller}
- Wait Until Keyword Succeeds 240 1 Ip Addres Should Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP_1} ${active_controller}
+ BuiltIn.Wait Until Keyword Succeeds 240 1 SxpClusterLib.Ip Addres Should Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP_1} ${active_controller}
Isolation of SXP service follower Test
[Documentation] Test Route update mechanism during Cluster isolation,
... after each isolation virtual ip should be pre-routed to new leader
- Check Shards Status
- ${any_controller} Get Any Controller
+ SxpClusterLib.Check Shards Status
+ ${any_controller} = SxpClusterLib.Get Any Controller
Add Route Definition To Cluster ${VIRTUAL_IP_1} ${VIRTUAL_IP_MASK_1} ${VIRTUAL_INTERFACE_1} ${any_controller}
: FOR ${i} IN RANGE 0 ${SAMPLES}
- \ ${controller_index} Get Active Controller
+ \ ${controller_index} = SxpClusterLib.Get Active Controller
\ Isolate SXP Controller ${controller_index}
*** Keywords ***
Put Route Definition To Cluster
[Arguments] ${virtual_ip} ${VIRTUAL_IP_MASK} ${VIRTUAL_INTERFACE} ${follower}
[Documentation] Put Route definition to DS replacing all present
- ${route} Route Definition Xml ${virtual_ip} ${VIRTUAL_IP_MASK} ${VIRTUAL_INTERFACE}
- ${routes} Route Definitions Xml ${route}
- Put Routing Configuration To Controller ${routes} controller${follower}
+ ${route} = Sxp.Route Definition Xml ${virtual_ip} ${VIRTUAL_IP_MASK} ${VIRTUAL_INTERFACE}
+ ${routes} = Sxp.Route Definitions Xml ${route}
+ SxpLib.Put Routing Configuration To Controller ${routes} controller${follower}
Add Route Definition To Cluster
[Arguments] ${VIRTUAL_IP} ${VIRTUAL_IP_MASK} ${VIRTUAL_INTERFACE} ${follower}
[Documentation] Add Route definition to DS
- ${old_routes} Get Routing Configuration From Controller controller${follower}
- ${route} Route Definition Xml ${VIRTUAL_IP} ${VIRTUAL_IP_MASK} ${VIRTUAL_INTERFACE}
- ${routes} Route Definitions Xml ${route} ${old_routes}
- Put Routing Configuration To Controller ${routes} controller${follower}
+ ${old_routes} = SxpLib.Get Routing Configuration From Controller controller${follower}
+ ${route} = Sxp.Route Definition Xml ${VIRTUAL_IP} ${VIRTUAL_IP_MASK} ${VIRTUAL_INTERFACE}
+ ${routes} = Sxp.Route Definitions Xml ${route} ${old_routes}
+ SxpLib.Put Routing Configuration To Controller ${routes} controller${follower}
Custom Clean SXP Cluster
[Documentation] Cleans up Route definitions
- ${follower} Get Active Controller
- Clean Routing Configuration To Controller controller${follower}
+ ${follower} = SxpClusterLib.Get Active Controller
+ SxpLib.Clean Routing Configuration To Controller controller${follower}
Setup Custom SXP Cluster Session
[Documentation] Prepare topology for testing, creates sessions and generate Route definitions based on Cluster nodes ip
- Shutdown Tools Node
- Setup SXP Cluster Session
- ${mac_addresses} Map Followers To Mac Addresses
- Set Suite Variable ${MAC_ADDRESS_TABLE} ${mac_addresses}
+ SxpClusterLib.Shutdown Tools Node
+ SxpClusterLib.Setup SXP Cluster Session
+ ${mac_addresses} = SxpClusterLib.Map Followers To Mac Addresses
+ BuiltIn.Set Suite Variable ${MAC_ADDRESS_TABLE} ${mac_addresses}
Clean Custom SXP Cluster Session
[Documentation] Cleans up resources generated by test
- ${controller_index} Get Active Controller
- Clean Routing Configuration To Controller controller${controller_index}
- Clean SXP Cluster Session
+ ${controller_index} = SxpClusterLib.Get Active Controller
+ SxpLib.Clean Routing Configuration To Controller controller${controller_index}
+ SxpClusterLib.Clean SXP Cluster Session
Isolate SXP Controller
[Arguments] ${controller_index}
[Documentation] Isolate one of cluster nodes and perform check that virtual ip is routed to another cluster node,
... afterwards unisolate old leader.
- Isolate_Member_From_List_Or_All ${controller_index}
- Wait Until Keyword Succeeds 240 1 Sync_Status_Should_Be_False ${controller_index}
- Wait Until Keyword Succeeds 240 1 Ip Addres Should Not Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP_1} ${controller_index}
- ${active_follower} Get Active Controller
- Wait Until Keyword Succeeds 240 1 Ip Addres Should Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP_1} ${active_follower}
- Flush_Iptables_From_List_Or_All
- Wait Until Keyword Succeeds 240 1 Sync_Status_Should_Be_True ${controller_index}
+ ClusterManagement.Isolate_Member_From_List_Or_All ${controller_index}
+ BuiltIn.Wait Until Keyword Succeeds 120 1 ClusterManagement.Sync_Status_Should_Be_False ${controller_index}
+ BuiltIn.Wait Until Keyword Succeeds 120 1 SxpClusterLib.Ip Addres Should Not Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP_1} ${controller_index}
+ ${active_follower} = SxpClusterLib.Get Active Controller
+ BuiltIn.Wait Until Keyword Succeeds 120 1 SxpClusterLib.Ip Addres Should Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP_1} ${active_follower}
+ ClusterManagement.Flush_Iptables_From_List_Or_All
+ BuiltIn.Wait Until Keyword Succeeds 120 1 ClusterManagement.Sync_Status_Should_Be_True ${controller_index}
*** Test Cases ***
Isolation of SXP service follower Test
[Documentation] Test SXP connection switchover only if Controller with SCS is isolated
- Check Shards Status
+ SxpClusterLib.Check Shards Status
Setup Custom SXP Cluster ${VIRTUAL_IP} listener
: FOR ${i} IN RANGE 0 ${SAMPLES}
- \ ${controller_index} Get Active Controller
+ \ ${controller_index} = SxpClusterLib.Get Active Controller
\ Isolate SXP Controller ${controller_index} listener
Isolation of SXP service follower Test Listener Part
[Documentation] Test SXP binding propagation only if Controller with SCS is isolated
- Check Shards Status
- ${controller_index} Get Active Controller
+ SxpClusterLib.Check Shards Status
+ ${controller_index} = SxpClusterLib.Get Active Controller
Setup Custom SXP Cluster ${VIRTUAL_IP} listener
Setup SXP Cluster Bindings ${CLUSTER_NODE_ID} controller${controller_index}
: FOR ${i} IN RANGE 0 ${SAMPLES}
- \ ${controller_index} Get Active Controller
+ \ ${controller_index} = SxpClusterLib.Get Active Controller
\ Isolate SXP Controller With Bindings ${controller_index} ${DEVICE_NODE_ID} listener ${DEVICE_SESSION}
Isolation of SXP service follower Test Speaker Part
[Documentation] Test SXP binding propagation only if Controller with SCS is isolated,
... the same case as above but with initiator of connection between nodes in oposite mode
- Check Shards Status
+ SxpClusterLib.Check Shards Status
Setup Custom SXP Cluster ${VIRTUAL_IP} speaker
Setup SXP Cluster Bindings ${DEVICE_NODE_ID} ${DEVICE_SESSION}
: FOR ${i} IN RANGE 0 ${SAMPLES}
- \ ${controller_index} Get Active Controller
+ \ ${controller_index} = SxpClusterLib.Get Active Controller
\ Isolate SXP Controller With Bindings ${controller_index} ${CLUSTER_NODE_ID} speaker
*** Keywords ***
Setup Custom SXP Cluster Session
[Documentation] Prepare topology for testing, creates sessions and generate Route definitions based on Cluster nodes ip
- Shutdown Tools Node
- Setup SXP Cluster Session
- ${controller_index} Get Active Controller
- ${mac_addresses} Map Followers To Mac Addresses
- Set Suite Variable ${MAC_ADDRESS_TABLE} ${mac_addresses}
- ${route} Route Definition Xml ${VIRTUAL_IP} ${VIRTUAL_IP_MASK} ${VIRTUAL_INTERFACE}
- ${routes} Route Definitions Xml ${route}
- Put Routing Configuration To Controller ${routes} controller${controller_index}
+ SxpClusterLib.Shutdown Tools Node
+ SxpClusterLib.Setup SXP Cluster Session
+ ${controller_index} = SxpClusterLib.Get Active Controller
+ ${mac_addresses} = SxpClusterLib.Map Followers To Mac Addresses
+ BuiltIn.Set Suite Variable ${MAC_ADDRESS_TABLE} ${mac_addresses}
+ ${route} = Sxp.Route Definition Xml ${VIRTUAL_IP} ${VIRTUAL_IP_MASK} ${VIRTUAL_INTERFACE}
+ ${routes} = Sxp.Route Definitions Xml ${route}
+ SxpLib.Put Routing Configuration To Controller ${routes} controller${controller_index}
Clean Custom SXP Cluster Session
[Documentation] Cleans up resources generated by test
- ${controller_index} Get Active Controller
- Clean Routing Configuration To Controller controller${controller_index}
- Clean SXP Cluster Session
+ ${controller_index} = SxpClusterLib.Get Active Controller
+ SxpLib.Clean Routing Configuration To Controller controller${controller_index}
+ SxpClusterLib.Clean SXP Cluster Session
Setup Custom SXP Cluster
[Arguments] ${peer_address} ${peer_mode}
[Documentation] Setup and connect SXP cluster topology
- Add Node ${DEVICE_NODE_ID} ip=0.0.0.0 session=${DEVICE_SESSION}
- Wait Until Keyword Succeeds 20 1 Check Node Started ${DEVICE_NODE_ID} session=${DEVICE_SESSION} system=${TOOLS_SYSTEM_IP}
+ SxpLib.Add Node ${DEVICE_NODE_ID} ip=0.0.0.0 session=${DEVICE_SESSION}
+ BuiltIn.Wait Until Keyword Succeeds 20 1 SxpLib.Check Node Started ${DEVICE_NODE_ID} session=${DEVICE_SESSION} system=${TOOLS_SYSTEM_IP}
... ip=${EMPTY}
- ${cluster_mode} Get Opposing Mode ${peer_mode}
- Add Connection version4 ${peer_mode} ${peer_address} 64999 ${DEVICE_NODE_ID} session=${DEVICE_SESSION}
- ${controller_id} Get Active Controller
- Add Node ${CLUSTER_NODE_ID} ip=${peer_address} session=controller${controller_id}
- Wait Until Keyword Succeeds 20 1 Check Cluster Node started ${CLUSTER_NODE_ID}
- Add Connection version4 ${cluster_mode} ${TOOLS_SYSTEM_IP} 64999 ${CLUSTER_NODE_ID} session=controller${controller_id}
- Wait Until Keyword Succeeds 120 1 Check Cluster is Connected ${CLUSTER_NODE_ID} mode=${cluster_mode} session=controller${controller_id}
+ ${cluster_mode} = Sxp.Get Opposing Mode ${peer_mode}
+ SxpLib.Add Connection version4 ${peer_mode} ${peer_address} 64999 ${DEVICE_NODE_ID} session=${DEVICE_SESSION}
+ ${controller_id} = SxpClusterLib.Get Active Controller
+ SxpLib.Add Node ${CLUSTER_NODE_ID} ip=${peer_address} session=controller${controller_id}
+ BuiltIn.Wait Until Keyword Succeeds 20 1 SxpClusterLib.Check Cluster Node started ${CLUSTER_NODE_ID}
+ SxpLib.Add Connection version4 ${cluster_mode} ${TOOLS_SYSTEM_IP} 64999 ${CLUSTER_NODE_ID} session=controller${controller_id}
+ BuiltIn.Wait Until Keyword Succeeds 120 1 SxpClusterLib.Check Cluster is Connected ${CLUSTER_NODE_ID} mode=${cluster_mode} session=controller${controller_id}
Setup SXP Cluster Bindings
[Arguments] ${node} ${session}
[Documentation] Setup initial bindings to SXP device
: FOR ${i} IN RANGE 1 ${BINDINGS}
- \ Add Bindings ${i}0 ${i}.${i}.${i}.${i}/32 node=${node} session=${session}
+ \ SxpLib.Add Bindings ${i}0 ${i}.${i}.${i}.${i}/32 node=${node} session=${session}
Isolate SXP Controller
[Arguments] ${controller_index} ${peer_mode}
[Documentation] Isolate one of cluster nodes and perform check that Device is still connected then revert isolation (and check connection again).
- ${cluster_mode} Get Opposing Mode ${peer_mode}
- Isolate_Member_From_List_Or_All ${controller_index}
- Wait Until Keyword Succeeds 240 1 Sync_Status_Should_Be_False ${controller_index}
- Wait Until Keyword Succeeds 240 1 Ip Addres Should Not Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP} ${controller_index}
- ${active_follower} Get Active Controller
- Wait Until Keyword Succeeds 240 1 Ip Addres Should Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP} ${active_follower}
- Wait Until Keyword Succeeds 60 1 Check Cluster is Connected ${CLUSTER_NODE_ID} mode=${cluster_mode} session=controller${active_follower}
- Wait Until Keyword Succeeds 60 1 Check Device is Connected ${DEVICE_NODE_ID} ${VIRTUAL_IP} ${peer_mode}
+ ${cluster_mode} = Sxp.Get Opposing Mode ${peer_mode}
+ ClusterManagement.Isolate_Member_From_List_Or_All ${controller_index}
+ BuiltIn.Wait Until Keyword Succeeds 240 1 ClusterManagement.Sync_Status_Should_Be_False ${controller_index}
+ BuiltIn.Wait Until Keyword Succeeds 240 1 SxpClusterLib.Ip Addres Should Not Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP} ${controller_index}
+ ${active_follower} = SxpClusterLib.Get Active Controller
+ BuiltIn.Wait Until Keyword Succeeds 240 1 SXpClusterLib.Ip Addres Should Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP} ${active_follower}
+ BuiltIn.Wait Until Keyword Succeeds 60 1 SxpClusterLib.Check Cluster is Connected ${CLUSTER_NODE_ID} mode=${cluster_mode} session=controller${active_follower}
+ BuiltIn.Wait Until Keyword Succeeds 60 1 Check Device is Connected ${DEVICE_NODE_ID} ${VIRTUAL_IP} ${peer_mode}
... session=${DEVICE_SESSION}
- Flush_Iptables_From_List_Or_All
- Wait Until Keyword Succeeds 240 1 Sync_Status_Should_Be_True ${controller_index}
- Wait Until Keyword Succeeds 60 1 Check Cluster is Connected ${CLUSTER_NODE_ID} mode=${cluster_mode} session=controller${active_follower}
- Wait Until Keyword Succeeds 60 1 Check Device is Connected ${DEVICE_NODE_ID} ${VIRTUAL_IP} ${peer_mode}
+ ClusterManagement.Flush_Iptables_From_List_Or_All
+ BuiltIn.Wait Until Keyword Succeeds 240 1 ClusterManagement.Sync_Status_Should_Be_True ${controller_index}
+ BuiltIn.Wait Until Keyword Succeeds 60 1 SxpClusterLib.Check Cluster is Connected ${CLUSTER_NODE_ID} mode=${cluster_mode} session=controller${active_follower}
+ BuiltIn.Wait Until Keyword Succeeds 60 1 Check Device is Connected ${DEVICE_NODE_ID} ${VIRTUAL_IP} ${peer_mode}
... session=${DEVICE_SESSION}
Isolate SXP Controller With Bindings
[Arguments] ${controller_index} ${node} ${peer_mode} ${session}=${EMPTY}
[Documentation] Isolate one of cluster nodes and perform check that bindings were propagated then revert isolation (and check connection again).
- ${find_session} Set Variable If '${session}' == '${EMPTY}' ${True} ${False}
- ${cluster_mode} Get Opposing Mode ${peer_mode}
- ${session} Set Variable If ${find_session} controller${controller_index} ${session}
- Isolate_Member_From_List_Or_All ${controller_index}
- Wait Until Keyword Succeeds 240 1 Sync_Status_Should_Be_False ${controller_index}
- Wait Until Keyword Succeeds 240 1 Ip Addres Should Not Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP} ${controller_index}
- ${active_follower} Get Active Controller
- Wait Until Keyword Succeeds 240 1 Ip Addres Should Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP} ${active_follower}
- Wait Until Keyword Succeeds 60 1 Check Cluster is Connected ${CLUSTER_NODE_ID} mode=${cluster_mode} session=controller${active_follower}
- Wait Until Keyword Succeeds 60 1 Check Device is Connected ${DEVICE_NODE_ID} ${VIRTUAL_IP} ${peer_mode}
+ ${find_session} = BuiltIn.Set Variable If '${session}' == '${EMPTY}' ${True} ${False}
+ ${cluster_mode} = Sxp.Get Opposing Mode ${peer_mode}
+ ${session} = BuiltIn.Set Variable If ${find_session} controller${controller_index} ${session}
+ ClusterManagement.Isolate_Member_From_List_Or_All ${controller_index}
+ BuiltIn.Wait Until Keyword Succeeds 240 1 ClusterManagement.Sync_Status_Should_Be_False ${controller_index}
+ BuiltIn.Wait Until Keyword Succeeds 240 1 SxpClusterLib.Ip Addres Should Not Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP} ${controller_index}
+ ${active_follower} = SxpClusterLib.Get Active Controller
+ BuiltIn.Wait Until Keyword Succeeds 240 1 SXpClusterLib.Ip Addres Should Be Routed To Follower ${MAC_ADDRESS_TABLE} ${VIRTUAL_IP} ${active_follower}
+ BuiltIn.Wait Until Keyword Succeeds 60 1 SxpClusterLib.Check Cluster is Connected ${CLUSTER_NODE_ID} mode=${cluster_mode} session=controller${active_follower}
+ BuiltIn.Wait Until Keyword Succeeds 60 1 Check Device is Connected ${DEVICE_NODE_ID} ${VIRTUAL_IP} ${peer_mode}
... session=${DEVICE_SESSION}
- ${session} Set Variable If ${find_session} controller${active_follower} ${session}
- Wait Until Keyword Succeeds 30 1 Check Bindings ${node} ${session}
- Flush_Iptables_From_List_Or_All
- Wait Until Keyword Succeeds 240 1 Sync_Status_Should_Be_True ${controller_index}
- Wait Until Keyword Succeeds 60 1 Check Cluster is Connected ${CLUSTER_NODE_ID} mode=${cluster_mode} session=controller${active_follower}
- Wait Until Keyword Succeeds 60 1 Check Device is Connected ${DEVICE_NODE_ID} ${VIRTUAL_IP} ${peer_mode}
+ ${session} = BuiltIn.Set Variable If ${find_session} controller${active_follower} ${session}
+ BuiltIn.Wait Until Keyword Succeeds 30 1 Check Bindings ${node} ${session}
+ ClusterManagement.Flush_Iptables_From_List_Or_All
+ BuiltIn.Wait Until Keyword Succeeds 240 1 ClusterManagement.Sync_Status_Should_Be_True ${controller_index}
+ BuiltIn.Wait Until Keyword Succeeds 60 1 SxpClusterLib.Check Cluster is Connected ${CLUSTER_NODE_ID} mode=${cluster_mode} session=controller${active_follower}
+ BuiltIn.Wait Until Keyword Succeeds 60 1 Check Device is Connected ${DEVICE_NODE_ID} ${VIRTUAL_IP} ${peer_mode}
... session=${DEVICE_SESSION}
- Wait Until Keyword Succeeds 30 1 Check Bindings ${node} ${session}
+ BuiltIn.Wait Until Keyword Succeeds 30 1 Check Bindings ${node} ${session}
Check Device is Connected
[Arguments] ${node} ${remote_ip} ${mode}=any ${version}=version4 ${port}=64999 ${session}=session
[Documentation] Checks if SXP device is connected to at least one cluster node
- ${resp} Get Connections node=${node} session=${session}
- Should Contain Connection ${resp} ${remote_ip} ${port} ${mode} ${version}
+ ${resp} = SxpLib.Get Connections node=${node} session=${session}
+ SxpLib.Should Contain Connection ${resp} ${remote_ip} ${port} ${mode} ${version}
Check Bindings
[Arguments] ${node} ${session}
[Documentation] Checks that bindings were propagated to Peer
- ${resp} Get Bindings node=${node} session=${session}
+ ${resp} SxpLib.Get Bindings node=${node} session=${session}
: FOR ${i} IN RANGE 1 ${BINDINGS}
- \ Should Contain Binding ${resp} ${i}0 ${i}.${i}.${i}.${i}/32
+ \ SxpLib.Should Contain Binding ${resp} ${i}0 ${i}.${i}.${i}.${i}/32
Code Review / integration / test.git / commitdiff