* Removed Force tags "exclude" in 010__vtn_manager_flowfilter.robot and 010__vtn_manager_pathpolicy.robot(OF10 and OF13)files and
* Renamed pathpolicy robot file as 020_vtn_pathmap_pathpolicy.robot
* Modify test case to work for RESTCONF feature, earlier test was written for RESTAPI spec.
* Modify VtnMaKeyword.robot file for flowfilter and pathmap, pathpolicy functioanlities.
Change-Id: I26ceea5e2bee7dafd5701c1e7c321a4cd8f5dddf
Signed-off-by: Karthik.S <siva-karthik@hcl.com>
${vlanmap_bridge2} 300
@{VLANMAP_BRIDGE1_DATAFLOW} "reason":"VLANMAPPED" "virtual-node-path":{"bridge-name":"vBridge1_vlan","tenant-name":"Tenant1","vlan-map-id":"ANY.200"}
@{VLANMAP_BRIDGE2_DATAFLOW} "reason":"VLANMAPPED" "virtual-node-path":{"bridge-name":"vBridge2_vlan","tenant-name":"Tenant1","vlan-map-id":"ANY.300"}
-${in_port} 1
${out_before_pathpolicy} output:2
${out_after_pathpolicy} output:3
-${flowcond_restconfigdata} {"input":{"operation":"SET","present":"false","name":"cond_1","vtn-flow-match":[{"vtn-ether-match":{"destination-address":"ba:bd:0f:e3:a8:c8","ether-type":"2048","source-address":"ca:9e:58:0c:1e:f0","vlan-id": "1"},"vtn-inet-match":{"source-network":"10.0.0.1/32","protocol":1,"destination-network":"10.0.0.2/32"},"index":"1"}]}}
+${pathpolicy_topo_13} sudo mn --controller=remote,ip=${CONTROLLER} --custom topo-3sw-2host_multipath.py --topo pathpolicytopo --switch ovsk,protocols=OpenFlow13
+${pathpolicy_topo_10} sudo mn --controller=remote,ip=${CONTROLLER} --custom topo-3sw-2host_multipath.py --topo pathpolicytopo --switch ovsk,protocols=OpenFlow10
+@{PATHMAP_ATTR} "index":"1" "condition":"flowcond_path" "policy":"1"
+${policy_id} 1
+${in_port} 1
+@{PATHPOLICY_ATTR} "id":1 "port-desc":"openflow:4,2,s4-eth2"
+${custom} ${CURDIR}/${CREATE_PATHPOLICY_TOPOLOGY_FILE_PATH}
*** Keywords ***
Start SuiteVtnMa
... ELSE IF '${vBridge_name}' == 'vBridge1_vlan' DataFlowsForBridge ${resp} @{VLANMAP_BRIDGE1_DATAFLOW}
... ELSE DataFlowsForBridge ${resp} @{VLANMAP_BRIDGE2_DATAFLOW}
+Start PathSuiteVtnMaTest
+ [Documentation] Start VTN Manager Test Suite and Mininet
+ Start SuiteVtnMaTest
+ Start Mininet ${MININET} ${pathpolicy_topo_13} ${custom}
+
+Start PathSuiteVtnMaTestOF10
+ [Documentation] Start VTN Manager Test Suite and Mininet in Open Flow 10 Specification
+ Start SuiteVtnMaTest
+ Start Mininet ${MININET} ${pathpolicy_topo_10} ${custom}
+
+Stop PathSuiteVtnMaTest
+ [Documentation] Cleanup/Shutdown work at the completion of all tests.
+ Delete All Sessions
+ Stop Mininet ${mininet_conn_id}
+
DataFlowsForBridge
[Arguments] ${resp} @{BRIDGE_DATAFLOW}
[Documentation] Verify whether the required attributes exists.
: FOR ${pathpolicyElement} IN @{PATHPOLICY_ATTR}
\ should Contain ${resp.content} ${pathpolicyElement}
+Delete a pathmap
+ [Arguments] ${tenant_path}
+ [Documentation] Remove a pathmap for a vtn
+ ${resp}= RequestsLibrary.Post Request session restconf/operations/vtn-path-map:remove-path-map data={"input":{"tenant-name":"${tenant_path}","map-index":["${policy_id}"]}}
+ Should Be Equal As Strings ${resp.status_code} 200
+
Delete a pathpolicy
- [Arguments] ${path_id}
+ [Arguments] ${policy_id}
[Documentation] Delete a pathpolicy for a vtn
- ${resp}= RequestsLibrary.Post Request session restconf/operations/vtn-path-policy:remove-path-policy data={"input": {"id": "${path_id}"}}
+ ${resp}= RequestsLibrary.Post Request session restconf/operations/vtn-path-policy:remove-path-policy data={"input":{"id":"${policy_id}"}}
Should Be Equal As Strings ${resp.status_code} 200
Verify flowEntryPathPolicy
Add a vtn flowfilter
[Arguments] ${vtn_name} ${vtnflowfilter_data}
[Documentation] Create a flowfilter for a vtn
- ${resp}= RequestsLibrary.Post Request session restconf/operations/vtn-flow-filter:set-flow-filter data=${vtnflowfilter_data}
+ ${resp}= RequestsLibrary.Post Request session restconf/operations/vtn-flow-filter:set-flow-filter data={"input": {"tenant-name": "${vtn_name}",${vtnflowfilter_data}}}
Should Be Equal As Strings ${resp.status_code} 200
Add a vbr flowfilter
[Arguments] ${vtn_name} ${vBridge_name} ${vbrflowfilter_data}
[Documentation] Create a flowfilter for a vbr
- ${resp}= RequestsLibrary.Post Request session restconf/operations/vtn-flow-filter:set-flow-filter data=${vbrflowfilter_data}
+ ${resp}= RequestsLibrary.Post Request session restconf/operations/vtn-flow-filter:set-flow-filter data={"input": {"tenant-name": "${vtn_name}", "bridge-name": "${vBridge_name}", ${vbrflowfilter_data}}}
Should Be Equal As Strings ${resp.status_code} 200
Add a vbrif flowfilter
[Arguments] ${vtn_name} ${vBridge_name} ${interface_name} ${vbrif_flowfilter_data}
[Documentation] Create a flowfilter for a vbrif
- ${resp}= RequestsLibrary.Post Request session restconf/operations/vtn-flow-filter:set-flow-filter data=${vbrif_flowfilter_data}
+ ${resp}= RequestsLibrary.Post Request session restconf/operations/vtn-flow-filter:set-flow-filter data={"input": {"tenant-name": ${vtn_name}, "bridge-name": "${vBridge_name}","interface-name":"${interface_name}",${vbrif_flowfilter_data}}}
Should Be Equal As Strings ${resp.status_code} 200
Verify Flow Entry for Inet Flowfilter
Get flowcondition
[Arguments] ${flowcond_name} ${retrieve}
- [Documentation] Retrieve the flowcondition by name and to check the removed flowcondition added "retrieve" argument to differentiate the status code, since
- ... after removing flowcondition name the status will be different compare to status code when the flowcondition name is present.
+ [Documentation] Retrieve the flowcondition by name and to check the removed flowcondition we added "retrieve" argument to differentiate the status code,
+ ... since after removing flowcondition name the status will be different compare to status code when the flowcondition name is present.
${resp}= RequestsLibrary.Get Request session restconf/operational/vtn-flow-condition:vtn-flow-conditions/vtn-flow-condition/${flowcond_name}
Run Keyword If '${retrieve}' == 'retrieve' Should Be Equal As Strings ${resp.status_code} 200
... ELSE Should Not Be Equal As Strings ${resp.status_code} 200
Remove flowcondition
[Arguments] ${flowcond_name}
[Documentation] Remove the flowcondition by name
- ${resp}= RequestsLibrary.Post Request session restconf/operations/vtn-flow-condition:remove-flow-condition {"input": {"name": "${flowcond_name}"}}
+ ${resp}= RequestsLibrary.Post Request session restconf/operations/vtn-flow-condition:remove-flow-condition data={"input":{"name":"${flowcond_name}"}}
Should Be Equal As Strings ${resp.status_code} 200
Documentation Test suite for VTN Manager using OF10
Suite Setup Start SuiteVtnMaTest
Suite Teardown Stop SuiteVtnMaTest
-Force Tags exclude
Resource ../../../libraries/VtnMaKeywords.robot
*** Variables ***
-${flowfilterInetdata} {"index":1,"condition":"cond1","filterType":{"pass":{}},"actions":[{"inet4src":{"address":"10.0.0.1"}},{"inet4dst":{"address":"10.0.0.3"}}]}
-${flowfilterInetdropdata} {"index":1,"condition":"cond1","filterType":{"drop":{}},"actions":[{"inet4src":{"address":"10.0.0.1"}},{"inet4dst":{"address":"10.0.0.3"}}]}
-${flowfilterIcmpCodedata} {"index":2,"condition":"cond1","filterType":{"pass":{}},"actions":[{"icmpcode":{"code":9}}]}
-${flowfilterTpsrcTpdstdata} {"index":3,"condition":"cond1","filterType":{"pass":{}},"actions":[{"tpsrc":{"port":"5"}},{"tpdst":{"port":"10"}}]}
-${flowfilterDscpdata} {"index":6,"condition":"cond1","filterType":{"pass":{}},"actions":[{"dscp": {"dscp": 10}}]}
-${macmap_data} {"machost": [{"address": "0e:d5:e3:40:a3:f0", "vlan": "0"},{"address": "9a:dd:b0:8a:de:2f", "vlan": "0"}]}
-${flowfiltervlanpcp} {"index":7,"condition":"cond1","filterType":{"pass":{}},"actions":[{"inet4src":{"address":"10.0.0.1"}},{"inet4dst":{"address":"10.0.0.3"}},{"icmpcode":{"code":1}},{"vlanpcp":{"priority":3}}]}
-${vtn_flowfilterInetdata} {"index":8,"condition":"cond1","filterType":{"pass":{}},"actions":[{"inet4src":{"address":"10.0.0.1"}},{"inet4dst":{"address":"10.0.0.3"}}]}
-${vbr_flowfilterInetdata} {"index":9,"condition":"cond1","filterType":{"pass":{}},"actions":[{"inet4src":{"address":"10.0.0.1"}},{"inet4dst":{"address":"10.0.0.3"}}]}
+${flowfilterInetdata} "vtn-flow-filter":[{"condition":"cond_1","vtn-pass-filter":{},"vtn-flow-action":[{"order": "1","vtn-set-inet-src-action":{"ipv4-address":"10.0.0.1/32"}},{"order": "2","vtn-set-inet-dst-action":{"ipv4-address":"10.0.0.3/32"}}],"index": "1"}]
+
+${flowfilterInetdropdata} "vtn-flow-filter":[{"condition":"cond_1","vtn-drop-filter":{},"vtn-flow-action":[{"order": "1","vtn-set-inet-src-action":{"ipv4-address":"10.0.0.1/32"}},{"order": "2","vtn-set-inet-dst-action":{"ipv4-address":"10.0.0.3/32"}}],"index": "1"}]
+
+${flowfilterIcmpCodedata} "vtn-flow-filter":[{"condition": "cond_1","vtn-pass-filter": {},"vtn-flow-action":[{ "order":"1","vtn-set-icmp-code-action":{"code":"9"}}],"index":"2"}]
+
+${flowfilterTpsrcTpdstdata} "vtn-flow-filter": [{"condition": "cond_1","vtn-pass-filter": {},"vtn-flow-action": [{"order": "1","vtn-set-port-src-action": {"port": "5"}},{"order": "2","vtn-set-port-dst-action": {"port": "10"}}],"index": "3"}]
+
+${flowfilterDscpdata} "vtn-flow-filter":[{"condition": "cond_1","vtn-pass-filter": {},"vtn-flow-action": [{"order": "1","vtn-set-inet-dscp-action": {"dscp":"10"}}],"index":"6"}]
+
+${flowfiltervlanpcp} "vtn-flow-filter":[{"condition":"cond_1","vtn-pass-filter":{},"vtn-flow-action":[{"order":"1","vtn-set-inet-src-action":{"ipv4-address":"10.0.0.1/32"}},{"order":"2","vtn-set-inet-dst-action":{"ipv4-address":"10.0.0.3/32"}},{"order":"3","vtn-set-icmp-code-action":{"code":"1"}},{"order":"4","vtn-set-vlan-pcp-action":{"vlan-pcp":"3"}}],"index":"3"}]
*** Test Cases ***
Check if switch1 detected
Add a vtn Tenant1
[Documentation] Add a vtn Tenant1
- Add a vtn Tenant1 {"idleTimeout": "200","hardTimeout": "600","description": "Virtual Tenant1 for Hackfest network"}
+ Add a vtn Tenant1
Add a vBridge vBridge1
[Documentation] Add a vBridge vBridge1 in vtn Tenant1
- Add a vBridge Tenant1 vBridge1 {"ageInterval": "300","description": "vBridge1 for Tenant1"}
+ Add a vBridge Tenant1 vBridge1
Add a interface If1
[Documentation] Add a interface if1 into vBridge vBridge1
- Add a interface Tenant1 vBridge1 if1 {"enabled": "true","description": "Interface1 for vBridge1 for Tenant1"}
+ Add a interface Tenant1 vBridge1 if1
Add a interface if2
[Documentation] Add a interface if2 into vBridge vBridge1
- Add a interface Tenant1 vBridge1 if2 {"enabled": "true","description": "Interface2 for vBridge1 for Tenant1"}
+ Add a interface Tenant1 vBridge1 if2
Add a portmap for interface if1
[Documentation] Create a portmap on Interface if1 of vBridge1
- ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:02
- ${port} Create Dictionary name=s2-eth1
- ${portmap_data} Create Dictionary node=${node} port=${port}
- Add a portmap Tenant1 vBridge1 if1 ${portmap_data}
+ Add a portmap Tenant1 vBridge1 if1 openflow:2 s2-eth1
Add a portmap for interface if2
[Documentation] Create a portmap on Interface if2 of vBridge1
- ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:03
- ${port} Create Dictionary name=s3-eth1
- ${portmap_data} Create Dictionary node=${node} port=${port}
- Add a portmap Tenant1 vBridge1 if2 ${portmap_data}
+ Add a portmap Tenant1 vBridge1 if2 openflow:3 s3-eth1
Ping h1 to h3
[Documentation] Ping h1 to h3, verify no packet loss
- Mininet Ping Should Succeed h1 h3
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a vBridge vBridge2
[Documentation] Add a vBridge vBridge2 in vtn Tenant1
- Add a vBridge Tenant1 vBridge2 {}
+ Add a vBridge Tenant1 vBridge2
Add a interface If3
[Documentation] Add a interface if3 into vBrdige vBridge1
- Add a interface Tenant1 vBridge1 if3 {}
+ Add a interface Tenant1 vBridge1 if3
Add a interface if4
[Documentation] Add a interface if4 into vBrdige vBridge1
- Add a interface Tenant1 vBridge1 if4 {}
+ Add a interface Tenant1 vBridge1 if4
Add a portmap for interface if3
[Documentation] Create a portmap on Interface if3 of vBridge1
- ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:02
- ${port} Create Dictionary name=s2-eth2
- ${portmap_data} Create Dictionary node=${node} port=${port}
- Add a portmap Tenant1 vBridge1 if3 ${portmap_data}
+ Add a portmap Tenant1 vBridge1 if3 openflow:2 s2-eth2
Add a portmap for interface if4
[Documentation] Create a portmap on Interface if4 of vBridge1
- ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:03
- ${port} Create Dictionary name=s3-eth2
- ${portmap_data} Create Dictionary node=${node} port=${port}
- Add a portmap Tenant1 vBridge1 if4 ${portmap_data}
+ Add a portmap Tenant1 vBridge1 if4 openflow:3 s3-eth2
Ping h2 to h4
[Documentation] Ping h2 to h4, verify no packet loss
- Mininet Ping Should Succeed h2 h4
-
-Add a macmap
- [Documentation] Create a macmap on vBridge vBridge1
- Add a macmap Tenant1 vBridge1 ${macmap_data}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h2 h4
-Get flow
- [Documentation] Get flow of a vtn Tenant1
- Get flow Tenant1
-
-Add a flowcondition cond1
- [Documentation] Create a flowcondition cond1
- ${inet4}= Create Dictionary src=10.0.0.1 dst=10.0.0.3
- ${inetMatch}= Create Dictionary inet4=${inet4}
- ${matchElement}= Create Dictionary index=1 inetMatch=${inetMatch}
- @{matchlist} Create List ${matchElement}
- ${flowcond_data}= Create Dictionary name=cond1 match=${matchlist}
- Add a flowcondition cond1 ${flowcond_data}
+Add a flowcondition
+ [Documentation] Create a flowcondition cond_1 using restconfig api
+ Add a flowcondition cond_1
Add a flowfilter with inet4src and inet4dst
[Documentation] Create a flowfilter with inet4 and Verify ping
- Add a flowfilter Tenant1 vBridge1 if1 ${flowfilterInetdata} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vbrif flowfilter Tenant1 vBridge1 if1 ${flowfilterInetdata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a flowfilter with Icmp code
[Documentation] Create a flowfilter with icmp code and Verify ping
- Update a flowfilter Tenant1 vBridge1 if1 ${flowfilterIcmpCodedata} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vbrif flowfilter Tenant1 vBridge1 if1 ${flowfilterIcmpCodedata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a flowfilter with tpsrc and tpdst
[Documentation] Create a flowfilter with tpsrc and tpdst and Verify ping
- Update a flowfilter Tenant1 vBridge1 if1 ${flowfilterTpsrcTpdstdata} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vbrif flowfilter Tenant1 vBridge1 if1 ${flowfilterTpsrcTpdstdata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a flowfilter with dscp
[Documentation] Create a flowfilter with dscp and Verify ping
- Update a flowfilter Tenant1 vBridge1 if1 ${flowfilterDscpdata} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vbrif flowfilter Tenant1 vBridge1 if1 ${flowfilterDscpdata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Verify Flow Entry for Inet Flowfilter
[Documentation] Verify Flow Entry for Inet Flowfilter
Add a flowfilter with vlanpcp
[Documentation] Create a flowfilter with vlanpcp and Verify ping
- Update a flowfilter Tenant1 vBridge1 if1 ${flowfiltervlanpcp} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vbrif flowfilter Tenant1 vBridge1 if1 ${flowfiltervlanpcp}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a flowfilter_vtn with inet4src and inet4dst
[Documentation] Create a vtn_flowfilter with inet4 and Verify ping
- Add a flowfilter_vtn Tenant1 ${vtn_flowfilterInetdata} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vtn flowfilter Tenant1 ${flowfilterInetdata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a flowfilter_vbr with inet4src and inet4dst
[Documentation] Create a vbr_flowfilter with inet4 and Verify ping
- Add a flowfilter_vbr Tenant1 vBridge1 ${vbr_flowfilterInetdata} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vbr flowfilter Tenant1 vBridge1 ${flowfilterInetdata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a flowfilter with inet4 for drop
[Documentation] Create a flowfilter with inet4 for drop action and Verify no pinging
- Add a flowfilter for drop Tenant1 vBridge1 if1 ${flowfilterInetdropdata} ${index}
- Mininet Ping Should Not Succeed h1 h3
-
-Verify Removed Flow Entry For Inet After Drop Action
- [Documentation] Verify no flows between the hosts after drop
- Verify Removed Flow Entry for Inet Drop Flowfilter
+ [Tags] exclude
+ Add a vbrif flowfilter Tenant1 vBridge1 if1 ${flowfilterInetdropdata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Not Succeed h1 h3
Delete a flowcondition
[Documentation] Delete a flowcondition
- Delete a flowcondition cond1
+ Remove flowcondition cond_1
Delete a vtn Tenant1
- [Documentation] Delete a vtn Tenant1
+ [Documentation] Delete vtn Tenant1
Delete a vtn Tenant1
+++ /dev/null
-*** Settings ***
-Documentation Test suite for VTN Manager using OF10
-Suite Setup Start PathSuiteVtnMaTestOF10
-Suite Teardown Stop PathSuiteVtnMaTest
-Force Tags exclude
-Resource ../../../libraries/VtnMaKeywords.robot
-
-*** Variables ***
-${pathmapdata} {"index": 1,"condition":"flowcond_path","policy":1,"idleTimeout": 300,"hardTimeout": 0}
-${pathpolicydata} {"id": 1,"default": 100000,"cost": [{"location": {"node": {"type": "OF","id": "00:00:00:00:00:00:00:01"},"port": {"type": "OF","id": "3","name": "s1-eth3"}},"cost": 1000},{"location": {"node": {"type": "OF","id": "00:00:00:00:00:00:00:04"},"port": {"type": "OF","id": "2","name": "s4-eth2"}},"cost": 1000},{"location": {"node": {"type": "OF", "id": "00:00:00:00:00:00:00:03"},"port": {"type": "OF","id": "3","name": "s3-eth3"}},"cost": 100000}]}
-
-*** Test Cases ***
-Check if switch1 detected
- [Documentation] Check if openflow:1 is detected
- BuiltIn.Wait_Until_Keyword_Succeeds 12 3 Fetch vtn switch inventory openflow:1
-
-Check if switch2 detected
- [Documentation] Check if openflow:2 is detected
- BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:2
-
-Check if switch3 detected
- [Documentation] Check if openflow:3 is detected
- BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:3
-
-Check if switch4 detected
- [Documentation] Check if openflow:4 is detected
- BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:4
-
-Add a vtn Tenant_path
- [Documentation] Add a vtn Tenant_path
- Add a vtn Tenant_path {"idleTimeout": "200","hardTimeout": "600","description": "Virtual Tenant_path for Hackfest network"}
-
-Add a vBridge vBridge1
- [Documentation] Add a vBridge vBridge1 in vtn Tenant_path
- Add a vBridge Tenant_path vBridge1 {"ageInterval": "300","description": "vBridge1 for Tenant_path"}
-
-Add a interface If1_path
- [Documentation] Add a interface if1_path into vBrdige vBridge1
- Add a interface Tenant_path vBridge1 if1_path {}
-
-Add a portmap for interface if1_path
- [Documentation] Create a portmap on Interface if1 of vBridge1
- ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:01
- ${port} Create Dictionary name=s1-eth1 type=OF id=1
- ${portmap_data} Create Dictionary node=${node} port=${port}
- Add a portmap Tenant_path vBridge1 if1_path ${portmap_data}
-
-Add a interface If2_path
- [Documentation] Add a interface if2_path into vBrdige vBridge1
- Add a interface Tenant_path vBridge1 if2_path {}
-
-Add a portmap for interface if2_path
- [Documentation] Create a portmap on Interface if2_path of vBridge1
- ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:03
- ${port} Create Dictionary name=s3-eth3 type=OF id=3
- ${portmap_data} Create Dictionary node=${node} port=${port}
- Add a portmap Tenant_path vBridge1 if2_path ${portmap_data}
-
-Ping h1 to h2 before path policy
- [Documentation] Ping h1 to h2, verify no packet loss
- Mininet Ping Should Succeed h1 h2
-
-Verify flowEntryBeforePathPolicy
- [Documentation] Checking Flows on switch s1 and s3
- Verify flowEntryPathPolicy OF10 ${in_port} ${out_before_pathpolicy}
-
-Add a flowcondition flowcond_path
- [Documentation] Create a flowcondition flowcond_path
- ${inet4}= Create Dictionary src=10.0.0.1 dst=10.0.0.2 protocol=1
- ${inetMatch}= Create Dictionary inet4=${inet4}
- ${ethernet}= Create Dictionary src=ca:9e:58:0c:1e:f0 dst=ba:bd:0f:e3:a8:c8 type=2048
- ${matchElement}= Create Dictionary index=1 ethernet=${ethernet} inetMatch=${inetMatch}
- @{matchlist} Create List ${matchElement}
- ${flowcond_data}= Create Dictionary name=flowcond_path match=${matchlist}
- Add a flowcondition flowcond_path ${flowcond_data}
-
-Add a pathmap
- [Documentation] Create a pathmap in the vtn
- Add a pathmap ${pathmapdata}
-
-Get a pathmap
- [Documentation] Retrieve a pathmap in the vtn
- Get a pathmap
-
-Add a pathpolicy
- [Documentation] Create a pathpolicy in the vtn
- Add a pathpolicy ${pathpolicydata}
-
-Get a pathpolicy
- [Documentation] Retrieve a pathpolicy in the vtn
- Get a pathpolicy
-
-Ping h1 to h2 after path policy
- [Documentation] Ping h1 to h2, verify no packet loss
- Mininet Ping Should Succeed h1 h2
-
-Verify flowEntryAfterPathPolicy
- [Documentation] Checking Flows on switch s1 and s3
- Verify flowEntryPathPolicy OF10 ${in_port} ${out_after_pathpolicy}
-
-Delete a pathmap
- [Documentation] Delete a pathmap
- Delete a pathmap
-
-Get a pathmap after delete
- [Documentation] Retrieve a pathmap in the vtn after delete to check whether it is deleted properly
- Get a pathmap after delete
-
-Delete a pathpolicy
- [Documentation] Delete a pathpolicy
- Delete a pathpolicy
-
-Get a pathpolicy after delete
- [Documentation] Retrieve a pathpolicy in the vtn after delete to check whether it is deleted properly
- Get a pathpolicy after delete
-
-Delete a flowcondition
- [Documentation] Delete a flowcondition
- Delete a flowcondition flowcond_path
-
-Delete a vtn Tenant_path
- [Documentation] Delete a vtn Tenant_path
- Delete a vtn Tenant_path
--- /dev/null
+*** Settings ***
+Documentation Test suite for VTN Manager PathPolicy using OF10
+Suite Setup Start PathSuiteVtnMaTestOF10
+Suite Teardown Stop PathSuiteVtnMaTest
+Resource ../../../libraries/VtnMaKeywords.robot
+
+*** Variables ***
+${pathmapdata} {"input":{"tenant-name":"Tenant_path","path-map-list":[{"condition":"flowcond_path","policy":"1","index": "1","idle-timeout":"300","hard-timeout":"0"}]}}
+
+${pathpolicydata} {"input":{"operation":"SET","id": "1","default-cost": "10000","vtn-path-cost": [{"port-desc":"openflow:1,3,s1-eth3","cost":"1000"},{"port-desc":"openflow:4,2,s4-eth2","cost":"1000"},{"port-desc":"openflow:3,3,s3-eth3","cost":"100000"}]}}
+
+
+*** Test Cases ***
+Check if switch1 detected
+ [Documentation] Check if openflow:1 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 12 3 Fetch vtn switch inventory openflow:1
+
+Check if switch2 detected
+ [Documentation] Check if openflow:2 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:2
+
+Check if switch3 detected
+ [Documentation] Check if openflow:3 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:3
+
+Check if switch4 detected
+ [Documentation] Check if openflow:4 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:4
+
+Add a vtn Tenant_path
+ [Documentation] Add a vtn Tenant_path
+ Add a vtn Tenant_path
+
+Add a vBridge vBridge1
+ [Documentation] Add a vBridge vBridge1 in vtn Tenant_path
+ Add a vBridge Tenant_path vBridge1
+
+Add a interface If1_path
+ [Documentation] Add a interface if1_path into vBrdige vBridge1
+ Add a interface Tenant_path vBridge1 if1_path
+
+Add a portmap for interface if1_path
+ [Documentation] Create a portmap on Interface if1 of vBridge1
+ Add a portmap Tenant_path vBridge1 if1_path openflow:1 s1-eth1
+
+Add a interface If2_path
+ [Documentation] Add a interface if2_path into vBrdige vBridge1
+ Add a interface Tenant_path vBridge1 if2_path
+
+Add a portmap for interface if2_path
+ [Documentation] Create a portmap on Interface if2_path of vBridge1
+ Add a portmap Tenant_path vBridge1 if2_path openflow:3 s3-eth3
+
+Ping h1 to h2 before path policy
+ [Documentation] Ping h1 to h2, verify no packet loss
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h2
+
+Verify flowEntryBeforePathPolicy
+ [Documentation] Checking Flows on switch s1 and s3
+ [Tags] exclude
+ Verify flowEntryPathPolicy OF10 ${in_port} ${out_before_pathpolicy}
+
+Add a flowcondition flowcond_path
+ [Documentation] Create a flowcondition flowcond_path
+ Add a flowcondition flowcond_path
+
+Add a pathmap
+ [Documentation] Create a pathmap in the vtn
+ Add a pathmap ${pathmapdata}
+
+Add a pathpolicy
+ [Documentation] Create a pathpolicy in the vtn
+ Add a pathpolicy ${pathpolicydata}
+
+Get a pathpolicy
+ [Documentation] Retrieve a pathpolicy in the vtn
+ Get a pathpolicy ${policy_id}
+
+Ping h1 to h2 after path policy
+ [Documentation] Ping h1 to h2, verify no packet loss
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h2
+
+Verify flowEntryAfterPathPolicy
+ [Documentation] Checking Flows on switch s1 and s3
+ [Tags] exclude
+ Verify flowEntryPathPolicy OF10 ${in_port} ${out_after_pathpolicy}
+
+Delete a pathmap
+ [Documentation] Delete a pathmap
+ Delete a pathmap Tenant_path
+
+Delete a pathpolicy
+ [Documentation] Delete a pathpolicy
+ Delete a pathpolicy ${policy_id}
+
+Delete a flowcondition
+ [Documentation] Delete a flowcondition
+ Remove flowcondition flowcond_path
+
+Delete a vtn Tenant_path
+ [Documentation] Delete a vtn Tenant_path
+ Delete a vtn Tenant_path
Documentation Test suite for VTN Manager using OF13
Suite Setup Start SuiteVtnMaTest
Suite Teardown Stop SuiteVtnMaTest
-Force Tags exclude
Resource ../../../libraries/VtnMaKeywords.robot
*** Variables ***
-${flowfilterInetdata} {"index":1,"condition":"cond1","filterType":{"pass":{}},"actions":[{"inet4src":{"address":"10.0.0.1"}},{"inet4dst":{"address":"10.0.0.3"}}]}
-${flowfilterInetdropdata} {"index":1,"condition":"cond1","filterType":{"drop":{}},"actions":[{"inet4src":{"address":"10.0.0.1"}},{"inet4dst":{"address":"10.0.0.3"}}]}
-${flowfilterIcmpCodedata} {"index":2,"condition":"cond1","filterType":{"pass":{}},"actions":[{"icmpcode":{"code":9}}]}
-${flowfilterTpsrcTpdstdata} {"index":3,"condition":"cond1","filterType":{"pass":{}},"actions":[{"tpsrc":{"port":"5"}},{"tpdst":{"port":"10"}}]}
-${flowfilterDscpdata} {"index":6,"condition":"cond1","filterType":{"pass":{}},"actions":[{"dscp": {"dscp": 10}}]}
-${macmap_data} {"machost": [{"address": "0e:d5:e3:40:a3:f0", "vlan": "0"},{"address": "9a:dd:b0:8a:de:2f", "vlan": "0"}]}
-${flowfiltervlanpcp} {"index":7,"condition":"cond1","filterType":{"pass":{}},"actions":[{"inet4src":{"address":"10.0.0.1"}},{"inet4dst":{"address":"10.0.0.3"}},{"icmpcode":{"code":1}},{"vlanpcp":{"priority":3}}]}
-${vtn_flowfilterInetdata} {"index":8,"condition":"cond1","filterType":{"pass":{}},"actions":[{"inet4src":{"address":"10.0.0.1"}},{"inet4dst":{"address":"10.0.0.3"}}]}
-${vbr_flowfilterInetdata} {"index":9,"condition":"cond1","filterType":{"pass":{}},"actions":[{"inet4src":{"address":"10.0.0.1"}},{"inet4dst":{"address":"10.0.0.3"}}]}
+${flowfilterInetdata} "vtn-flow-filter":[{"condition":"cond_1","vtn-pass-filter":{},"vtn-flow-action":[{"order": "1","vtn-set-inet-src-action":{"ipv4-address":"10.0.0.1/32"}},{"order": "2","vtn-set-inet-dst-action":{"ipv4-address":"10.0.0.3/32"}}],"index": "1"}]
+
+${flowfilterInetdropdata} "vtn-flow-filter":[{"condition":"cond_1","vtn-drop-filter":{},"vtn-flow-action":[{"order": "1","vtn-set-inet-src-action":{"ipv4-address":"10.0.0.1/32"}},{"order": "2","vtn-set-inet-dst-action":{"ipv4-address":"10.0.0.3/32"}}],"index": "1"}]
+
+${flowfilterIcmpCodedata} "vtn-flow-filter":[{"condition": "cond_1","vtn-pass-filter": {},"vtn-flow-action":[{ "order":"1","vtn-set-icmp-code-action":{"code":"9"}}],"index":"2"}]
+
+${flowfilterTpsrcTpdstdata} "vtn-flow-filter": [{"condition": "cond_1","vtn-pass-filter": {},"vtn-flow-action": [{"order": "1","vtn-set-port-src-action": {"port": "5"}},{"order": "2","vtn-set-port-dst-action": {"port": "10"}}],"index": "3"}]
+
+${flowfilterDscpdata} "vtn-flow-filter":[{"condition": "cond_1","vtn-pass-filter": {},"vtn-flow-action": [{"order": "1","vtn-set-inet-dscp-action": {"dscp":"10"}}],"index":"6"}]
+
+${flowfiltervlanpcp} "vtn-flow-filter":[{"condition":"cond_1","vtn-pass-filter":{},"vtn-flow-action":[{"order":"1","vtn-set-inet-src-action":{"ipv4-address":"10.0.0.1/32"}},{"order":"2","vtn-set-inet-dst-action":{"ipv4-address":"10.0.0.3/32"}},{"order":"3","vtn-set-icmp-code-action":{"code":"1"}},{"order":"4","vtn-set-vlan-pcp-action":{"vlan-pcp":"3"}}],"index":"3"}]
*** Test Cases ***
Check if switch1 detected
Add a vtn Tenant1
[Documentation] Add a vtn Tenant1
- Add a vtn Tenant1 {"idleTimeout": "200","hardTimeout": "600","description": "Virtual Tenant1 for Hackfest network"}
+ Add a vtn Tenant1
Add a vBridge vBridge1
[Documentation] Add a vBridge vBridge1 in vtn Tenant1
- Add a vBridge Tenant1 vBridge1 {"ageInterval": "300","description": "vBridge1 for Tenant1"}
+ Add a vBridge Tenant1 vBridge1
Add a interface If1
[Documentation] Add a interface if1 into vBridge vBridge1
- Add a interface Tenant1 vBridge1 if1 {"enabled": "true","description": "Interface1 for vBridge1 for Tenant1"}
+ Add a interface Tenant1 vBridge1 if1
Add a interface if2
[Documentation] Add a interface if2 into vBridge vBridge1
- Add a interface Tenant1 vBridge1 if2 {"enabled": "true","description": "Interface2 for vBridge1 for Tenant1"}
+ Add a interface Tenant1 vBridge1 if2
Add a portmap for interface if1
[Documentation] Create a portmap on Interface if1 of vBridge1
- ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:02
- ${port} Create Dictionary name=s2-eth1
- ${portmap_data} Create Dictionary node=${node} port=${port}
- Add a portmap Tenant1 vBridge1 if1 ${portmap_data}
+ Add a portmap Tenant1 vBridge1 if1 openflow:2 s2-eth1
Add a portmap for interface if2
[Documentation] Create a portmap on Interface if2 of vBridge1
- ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:03
- ${port} Create Dictionary name=s3-eth1
- ${portmap_data} Create Dictionary node=${node} port=${port}
- Add a portmap Tenant1 vBridge1 if2 ${portmap_data}
+ Add a portmap Tenant1 vBridge1 if2 openflow:3 s3-eth1
Ping h1 to h3
[Documentation] Ping h1 to h3, verify no packet loss
- Mininet Ping Should Succeed h1 h3
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a vBridge vBridge2
[Documentation] Add a vBridge vBridge2 in vtn Tenant1
- Add a vBridge Tenant1 vBridge2 {}
+ Add a vBridge Tenant1 vBridge2
Add a interface If3
[Documentation] Add a interface if3 into vBrdige vBridge1
- Add a interface Tenant1 vBridge1 if3 {}
+ Add a interface Tenant1 vBridge1 if3
Add a interface if4
[Documentation] Add a interface if4 into vBrdige vBridge1
- Add a interface Tenant1 vBridge1 if4 {}
+ Add a interface Tenant1 vBridge1 if4
Add a portmap for interface if3
[Documentation] Create a portmap on Interface if3 of vBridge1
- ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:02
- ${port} Create Dictionary name=s2-eth2
- ${portmap_data} Create Dictionary node=${node} port=${port}
- Add a portmap Tenant1 vBridge1 if3 ${portmap_data}
+ Add a portmap Tenant1 vBridge1 if3 openflow:2 s2-eth2
Add a portmap for interface if4
[Documentation] Create a portmap on Interface if4 of vBridge1
- ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:03
- ${port} Create Dictionary name=s3-eth2
- ${portmap_data} Create Dictionary node=${node} port=${port}
- Add a portmap Tenant1 vBridge1 if4 ${portmap_data}
+ Add a portmap Tenant1 vBridge1 if4 openflow:3 s3-eth2
Ping h2 to h4
[Documentation] Ping h2 to h4, verify no packet loss
- Mininet Ping Should Succeed h2 h4
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h2 h4
+
+Add a flowcondition
+ [Documentation] Create a flowcondition cond_1 using restconfig api
+ Add a flowcondition cond_1
Add a macmap
[Documentation] Create a macmap on vBridge vBridge1
+ [Tags] exclude
Add a macmap Tenant1 vBridge1 ${macmap_data}
Get flow
[Documentation] Get flow of a vtn Tenant1
+ [Tags] exclude
Get flow Tenant1
-Add a flowcondition cond1
- [Documentation] Create a flowcondition cond1
- ${inet4}= Create Dictionary src=10.0.0.1 dst=10.0.0.3
- ${inetMatch}= Create Dictionary inet4=${inet4}
- ${matchElement}= Create Dictionary index=1 inetMatch=${inetMatch}
- @{matchlist} Create List ${matchElement}
- ${flowcond_data}= Create Dictionary name=cond1 match=${matchlist}
- Add a flowcondition cond1 ${flowcond_data}
-
Add a flowfilter with inet4src and inet4dst
[Documentation] Create a flowfilter with inet4 and Verify ping
- Add a flowfilter Tenant1 vBridge1 if1 ${flowfilterInetdata} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vbrif flowfilter Tenant1 vBridge1 if1 ${flowfilterInetdata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a flowfilter with Icmp code
[Documentation] Create a flowfilter with icmp code and Verify ping
- Update a flowfilter Tenant1 vBridge1 if1 ${flowfilterIcmpCodedata} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vbrif flowfilter Tenant1 vBridge1 if1 ${flowfilterIcmpCodedata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a flowfilter with tpsrc and tpdst
[Documentation] Create a flowfilter with tpsrc and tpdst and Verify ping
- Update a flowfilter Tenant1 vBridge1 if1 ${flowfilterTpsrcTpdstdata} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vbrif flowfilter Tenant1 vBridge1 if1 ${flowfilterTpsrcTpdstdata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a flowfilter with dscp
[Documentation] Create a flowfilter with dscp and Verify ping
- Update a flowfilter Tenant1 vBridge1 if1 ${flowfilterDscpdata} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vbrif flowfilter Tenant1 vBridge1 if1 ${flowfilterDscpdata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Verify Flow Entry for Inet Flowfilter
[Documentation] Verify Flow Entry for Inet Flowfilter
Add a flowfilter with vlanpcp
[Documentation] Create a flowfilter with vlanpcp and Verify ping
- Update a flowfilter Tenant1 vBridge1 if1 ${flowfiltervlanpcp} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vbrif flowfilter Tenant1 vBridge1 if1 ${flowfiltervlanpcp}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a flowfilter_vtn with inet4src and inet4dst
[Documentation] Create a vtn_flowfilter with inet4 and Verify ping
- Add a flowfilter_vtn Tenant1 ${vtn_flowfilterInetdata} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vtn flowfilter Tenant1 ${flowfilterInetdata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a flowfilter_vbr with inet4src and inet4dst
[Documentation] Create a vbr_flowfilter with inet4 and Verify ping
- Add a flowfilter_vbr Tenant1 vBridge1 ${vbr_flowfilterInetdata} ${index}
- Mininet Ping Should Succeed h1 h3
+ Add a vbr flowfilter Tenant1 vBridge1 ${flowfilterInetdata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h3
Add a flowfilter with inet4 for drop
[Documentation] Create a flowfilter with inet4 for drop action and Verify no pinging
- Add a flowfilter for drop Tenant1 vBridge1 if1 ${flowfilterInetdropdata} ${index}
- Mininet Ping Should Not Succeed h1 h3
+ [Tags] exclude
+ Add a vbrif flowfilter Tenant1 vBridge1 if1 ${flowfilterInetdropdata}
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Not Succeed h1 h3
Verify Removed Flow Entry For Inet After Drop Action
[Documentation] Verify no flows between the hosts after drop
+ [Tags] exclude
Verify Removed Flow Entry for Inet Drop Flowfilter
Delete a flowcondition
[Documentation] Delete a flowcondition
- Delete a flowcondition cond1
+ Remove flowcondition cond_1
Delete a vtn Tenant1
[Documentation] Delete a vtn Tenant1
+++ /dev/null
-*** Settings ***
-Documentation Test suite for VTN Manager PathPolicy using OF13
-Suite Setup Start PathSuiteVtnMaTest
-Suite Teardown Stop PathSuiteVtnMaTest
-Force Tags exclude
-Resource ../../../libraries/VtnMaKeywords.robot
-
-*** Variables ***
-${pathmapdata} {"index": 1,"condition":"flowcond_path","policy":1,"idleTimeout": 300,"hardTimeout": 0}
-${pathpolicydata} {"id": 1,"default": 100000,"cost": [{"location": {"node": {"type": "OF","id": "00:00:00:00:00:00:00:01"},"port": {"type": "OF","id": "3","name": "s1-eth3"}},"cost": 1000},{"location": {"node": {"type": "OF","id": "00:00:00:00:00:00:00:04"},"port": {"type": "OF","id": "2","name": "s4-eth2"}},"cost": 1000},{"location": {"node": {"type": "OF", "id": "00:00:00:00:00:00:00:03"},"port": {"type": "OF","id": "3","name": "s3-eth3"}},"cost": 100000}]}
-
-*** Test Cases ***
-Check if switch1 detected
- [Documentation] Check if openflow:1 is detected
- BuiltIn.Wait_Until_Keyword_Succeeds 12 3 Fetch vtn switch inventory openflow:1
-
-Check if switch2 detected
- [Documentation] Check if openflow:2 is detected
- BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:2
-
-Check if switch3 detected
- [Documentation] Check if openflow:3 is detected
- BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:3
-
-Check if switch4 detected
- [Documentation] Check if openflow:4 is detected
- BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:4
-
-Add a vtn Tenant_path
- [Documentation] Add a vtn Tenant_path
- Add a vtn Tenant_path {"idleTimeout": "200","hardTimeout": "600","description": "Virtual Tenant_path for Hackfest network"}
-
-Add a vBridge vBridge1
- [Documentation] Add a vBridge vBridge1 in vtn Tenant_path
- Add a vBridge Tenant_path vBridge1 {"ageInterval": "300","description": "vBridge1 for Tenant_path"}
-
-Add a interface If1_path
- [Documentation] Add a interface if1_path into vBrdige vBridge1
- Add a interface Tenant_path vBridge1 if1_path {}
-
-Add a portmap for interface if1_path
- [Documentation] Create a portmap on Interface if1 of vBridge1
- ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:01
- ${port} Create Dictionary name=s1-eth1 type=OF id=1
- ${portmap_data} Create Dictionary node=${node} port=${port}
- Add a portmap Tenant_path vBridge1 if1_path ${portmap_data}
-
-Add a interface If2_path
- [Documentation] Add a interface if2_path into vBrdige vBridge1
- Add a interface Tenant_path vBridge1 if2_path {}
-
-Add a portmap for interface if2_path
- [Documentation] Create a portmap on Interface if2_path of vBridge1
- ${node} Create Dictionary type=OF id=00:00:00:00:00:00:00:03
- ${port} Create Dictionary name=s3-eth3 type=OF id=3
- ${portmap_data} Create Dictionary node=${node} port=${port}
- Add a portmap Tenant_path vBridge1 if2_path ${portmap_data}
-
-Ping h1 to h2 before path policy
- [Documentation] Ping h1 to h2, verify no packet loss
- Mininet Ping Should Succeed h1 h2
-
-Verify flowEntryBeforePathPolicy
- [Documentation] Checking Flows on switch s1 and s3
- Verify flowEntryPathPolicy OF13 ${in_port} ${out_before_pathpolicy}
-
-Add a flowcondition flowcond_path
- [Documentation] Create a flowcondition flowcond_path
- ${inet4}= Create Dictionary src=10.0.0.1 dst=10.0.0.2 protocol=1
- ${inetMatch}= Create Dictionary inet4=${inet4}
- ${ethernet}= Create Dictionary src=ca:9e:58:0c:1e:f0 dst=ba:bd:0f:e3:a8:c8 type=2048
- ${matchElement}= Create Dictionary index=1 ethernet=${ethernet} inetMatch=${inetMatch}
- @{matchlist} Create List ${matchElement}
- ${flowcond_data}= Create Dictionary name=flowcond_path match=${matchlist}
- Add a flowcondition flowcond_path ${flowcond_data}
-
-Add a pathmap
- [Documentation] Create a pathmap in the vtn
- Add a pathmap ${pathmapdata}
-
-Get a pathmap
- [Documentation] Retrieve a pathmap in the vtn
- Get a pathmap
-
-Add a pathpolicy
- [Documentation] Create a pathpolicy in the vtn
- Add a pathpolicy ${pathpolicydata}
-
-Get a pathpolicy
- [Documentation] Retrieve a pathpolicy in the vtn
- Get a pathpolicy
-
-Ping h1 to h2 after path policy
- [Documentation] Ping h1 to h2, verify no packet loss
- Mininet Ping Should Succeed h1 h2
-
-Verify flowEntryAfterPathPolicy
- [Documentation] Checking Flows on switch s1 and s3
- Verify flowEntryPathPolicy OF13 ${in_port} ${out_after_pathpolicy}
-
-Delete a pathmap
- [Documentation] Delete a pathmap
- Delete a pathmap
-
-Get a pathmap after delete
- [Documentation] Retrieve a pathmap in the vtn after delete to check whether it is deleted properly
- Get a pathmap after delete
-
-Delete a pathpolicy
- [Documentation] Delete a pathpolicy
- Delete a pathpolicy
-
-Get a pathpolicy after delete
- [Documentation] Retrieve a pathpolicy in the vtn after delete to check whether it is deleted properly
- Get a pathpolicy after delete
-
-Delete a flowcondition
- [Documentation] Delete a flowcondition
- Delete a flowcondition flowcond_path
-
-Delete a vtn Tenant_path
- [Documentation] Delete a vtn Tenant_path
- Delete a vtn Tenant_path
--- /dev/null
+*** Settings ***
+Documentation Test suite for VTN Manager PathPolicy using OF13
+Suite Setup Start PathSuiteVtnMaTest
+Suite Teardown Stop PathSuiteVtnMaTest
+Resource ../../../libraries/VtnMaKeywords.robot
+
+*** Variables ***
+${pathmapdata} {"input":{"tenant-name":"Tenant_path","path-map-list":[{"condition":"flowcond_path","policy":"1","index": "1","idle-timeout":"300","hard-timeout":"0"}]}}
+
+${pathpolicydata} {"input":{"operation":"SET","id": "1","default-cost": "10000","vtn-path-cost": [{"port-desc":"openflow:1,3,s1-eth3","cost":"1000"},{"port-desc":"openflow:4,2,s4-eth2","cost":"1000"},{"port-desc":"openflow:3,3,s3-eth3","cost":"100000"}]}}
+
+
+*** Test Cases ***
+Check if switch1 detected
+ [Documentation] Check if openflow:1 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 12 3 Fetch vtn switch inventory openflow:1
+
+Check if switch2 detected
+ [Documentation] Check if openflow:2 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:2
+
+Check if switch3 detected
+ [Documentation] Check if openflow:3 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:3
+
+Check if switch4 detected
+ [Documentation] Check if openflow:4 is detected
+ BuiltIn.Wait_Until_Keyword_Succeeds 3 1 Fetch vtn switch inventory openflow:4
+
+Add a vtn Tenant_path
+ [Documentation] Add a vtn Tenant_path
+ Add a vtn Tenant_path
+
+Add a vBridge vBridge1
+ [Documentation] Add a vBridge vBridge1 in vtn Tenant_path
+ Add a vBridge Tenant_path vBridge1
+
+Add a interface If1_path
+ [Documentation] Add a interface if1_path into vBrdige vBridge1
+ Add a interface Tenant_path vBridge1 if1_path
+
+Add a portmap for interface if1_path
+ [Documentation] Create a portmap on Interface if1 of vBridge1
+ Add a portmap Tenant_path vBridge1 if1_path openflow:1 s1-eth1
+
+Add a interface If2_path
+ [Documentation] Add a interface if2_path into vBrdige vBridge1
+ Add a interface Tenant_path vBridge1 if2_path
+
+Add a portmap for interface if2_path
+ [Documentation] Create a portmap on Interface if2_path of vBridge1
+ Add a portmap Tenant_path vBridge1 if2_path openflow:3 s3-eth3
+
+Ping h1 to h2 before path policy
+ [Documentation] Ping h1 to h2, verify no packet loss
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h2
+
+Verify flowEntryBeforePathPolicy
+ [Documentation] Checking Flows on switch s1 and s3
+ Verify flowEntryPathPolicy OF13 ${in_port} ${out_before_pathpolicy}
+
+Add a flowcondition flowcond_path
+ [Documentation] Create a flowcondition flowcond_path
+ Add a flowcondition flowcond_path
+
+Add a pathmap
+ [Documentation] Create a pathmap in the vtn
+ Add a pathmap ${pathmapdata}
+
+Add a pathpolicy
+ [Documentation] Create a pathpolicy in the vtn
+ Add a pathpolicy ${pathpolicydata}
+
+Get a pathpolicy
+ [Documentation] Retrieve a pathpolicy in the vtn
+ Get a pathpolicy ${policy_id}
+
+Ping h1 to h2 after path policy
+ [Documentation] Ping h1 to h2, verify no packet loss
+ Wait_Until_Keyword_Succeeds 20s 1s Mininet Ping Should Succeed h1 h2
+
+Verify flowEntryAfterPathPolicy
+ [Documentation] Checking Flows on switch s1 and s3
+ Verify flowEntryPathPolicy OF13 ${in_port} ${out_after_pathpolicy}
+
+Delete a pathmap
+ [Documentation] Delete a pathmap
+ Delete a pathmap Tenant_path
+
+Delete a pathpolicy
+ [Documentation] Delete a pathpolicy
+ Delete a pathpolicy ${policy_id}
+
+Delete a flowcondition
+ [Documentation] Delete a flowcondition
+ Remove flowcondition flowcond_path
+
+Delete a vtn Tenant_path
+ [Documentation] Delete vtn Tenant_path
+ Delete a vtn Tenant_path
Code Review / integration / test.git / commitdiff