+ module ietf-inet-types {
+
+ namespace "urn:ietf:params:xml:ns:yang:ietf-inet-types";
+ prefix "inet";
+
+ organization
+ "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
+
+ contact
+ "WG Web: <http://tools.ietf.org/wg/netmod/>
+ WG List: <mailto:netmod@ietf.org>
+
+ WG Chair: David Partain
+ <mailto:david.partain@ericsson.com>
+
+ WG Chair: David Kessens
+ <mailto:david.kessens@nsn.com>
+
+ Editor: Juergen Schoenwaelder
+ <mailto:j.schoenwaelder@jacobs-university.de>";
+
+ description
+ "This module contains a collection of generally useful derived
+ YANG data types for Internet addresses and related things.
+
+ Copyright (c) 2010 IETF Trust and the persons identified as
+ authors of the code. All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, is permitted pursuant to, and subject to the license
+ terms contained in, the Simplified BSD License set forth in Section
+ 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
+ (http://trustee.ietf.org/license-info).
+
+ This version of this YANG module is part of RFC 6021; see
+ the RFC itself for full legal notices.";
+
+ revision 2010-09-24 {
+ description
+ "Initial revision.";
+ reference
+ "RFC 6021: Common YANG Data Types";
+ }
+
+ /*** collection of protocol field related types ***/
+
+ typedef ip-version {
+ type enumeration {
+ enum unknown {
+ value "0";
+ description
+ "An unknown or unspecified version of the Internet protocol.";
+ }
+ enum ipv4 {
+ value "1";
+ description
+ "The IPv4 protocol as defined in RFC 791.";
+ }
+ enum ipv6 {
+ value "2";
+ description
+ "The IPv6 protocol as defined in RFC 2460.";
+ }
+ }
+ description
+ "This value represents the version of the IP protocol.
+
+ In the value set and its semantics, this type is equivalent
+ to the InetVersion textual convention of the SMIv2.";
+ reference
+ "RFC 791: Internet Protocol
+ RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
+ RFC 4001: Textual Conventions for Internet Network Addresses";
+ }
+
+ typedef dscp {
+ type uint8 {
+ range "0..63";
+ }
+ description
+ "The dscp type represents a Differentiated Services Code-Point
+ that may be used for marking packets in a traffic stream.
+
+ In the value set and its semantics, this type is equivalent
+ to the Dscp textual convention of the SMIv2.";
+ reference
+ "RFC 3289: Management Information Base for the Differentiated
+ Services Architecture
+ RFC 2474: Definition of the Differentiated Services Field
+ (DS Field) in the IPv4 and IPv6 Headers
+ RFC 2780: IANA Allocation Guidelines For Values In
+ the Internet Protocol and Related Headers";
+ }
+
+ typedef ipv6-flow-label {
+ type uint32 {
+ range "0..1048575";
+ }
+ description
+ "The flow-label type represents flow identifier or Flow Label
+ in an IPv6 packet header that may be used to discriminate
+ traffic flows.
+
+ In the value set and its semantics, this type is equivalent
+ to the IPv6FlowLabel textual convention of the SMIv2.";
+ reference
+ "RFC 3595: Textual Conventions for IPv6 Flow Label
+ RFC 2460: Internet Protocol, Version 6 (IPv6) Specification";
+ }
+
+ typedef port-number {
+ type uint16 {
+ range "0..65535";
+ }
+ description
+ "The port-number type represents a 16-bit port number of an
+ Internet transport layer protocol such as UDP, TCP, DCCP, or
+ SCTP. Port numbers are assigned by IANA. A current list of
+ all assignments is available from <http://www.iana.org/>.
+
+ Note that the port number value zero is reserved by IANA. In
+ situations where the value zero does not make sense, it can
+ be excluded by subtyping the port-number type.
+
+ In the value set and its semantics, this type is equivalent
+ to the InetPortNumber textual convention of the SMIv2.";
+ reference
+ "RFC 768: User Datagram Protocol
+ RFC 793: Transmission Control Protocol
+ RFC 4960: Stream Control Transmission Protocol
+ RFC 4340: Datagram Congestion Control Protocol (DCCP)
+ RFC 4001: Textual Conventions for Internet Network Addresses";
+ }
+
+ /*** collection of autonomous system related types ***/
+
+ typedef as-number {
+ type uint32;
+ description
+ "The as-number type represents autonomous system numbers
+ which identify an Autonomous System (AS). An AS is a set
+ of routers under a single technical administration, using
+ an interior gateway protocol and common metrics to route
+ packets within the AS, and using an exterior gateway
+ protocol to route packets to other ASs'. IANA maintains
+ the AS number space and has delegated large parts to the
+ regional registries.
+
+ Autonomous system numbers were originally limited to 16
+ bits. BGP extensions have enlarged the autonomous system
+ number space to 32 bits. This type therefore uses an uint32
+ base type without a range restriction in order to support
+ a larger autonomous system number space.
+
+ In the value set and its semantics, this type is equivalent
+ to the InetAutonomousSystemNumber textual convention of
+ the SMIv2.";
+ reference
+ "RFC 1930: Guidelines for creation, selection, and registration
+ of an Autonomous System (AS)
+ RFC 4271: A Border Gateway Protocol 4 (BGP-4)
+ RFC 4893: BGP Support for Four-octet AS Number Space
+ RFC 4001: Textual Conventions for Internet Network Addresses";
+ }
+
+ /*** collection of IP address and hostname related types ***/
+
+ typedef ip-address {
+ type union {
+ type inet:ipv4-address;
+ type inet:ipv6-address;
+ }
+ description
+ "The ip-address type represents an IP address and is IP
+ version neutral. The format of the textual representations
+ implies the IP version.";
+ }
+
+ typedef ipv4-address {
+ type string {
+ pattern
+ '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
+ + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'
+ + '(%[\p{N}\p{L}]+)?';
+ }
+ description
+ "The ipv4-address type represents an IPv4 address in
+ dotted-quad notation. The IPv4 address may include a zone
+ index, separated by a % sign.
+
+ The zone index is used to disambiguate identical address
+ values. For link-local addresses, the zone index will
+ typically be the interface index number or the name of an
+ interface. If the zone index is not present, the default
+ zone of the device will be used.
+
+ The canonical format for the zone index is the numerical
+ format";
+ }
+
+ typedef ipv6-address {
+ type string {
+ pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
+ + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
+ + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}'
+ + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'
+ + '(%[\p{N}\p{L}]+)?';
+ pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
+ + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'
+ + '(%.+)?';
+ }
+ description
+ "The ipv6-address type represents an IPv6 address in full,
+ mixed, shortened, and shortened-mixed notation. The IPv6
+ address may include a zone index, separated by a % sign.
+
+ The zone index is used to disambiguate identical address
+ values. For link-local addresses, the zone index will
+ typically be the interface index number or the name of an
+ interface. If the zone index is not present, the default
+ zone of the device will be used.
+
+ The canonical format of IPv6 addresses uses the compressed
+ format described in RFC 4291, Section 2.2, item 2 with the
+ following additional rules: the :: substitution must be
+ applied to the longest sequence of all-zero 16-bit chunks
+ in an IPv6 address. If there is a tie, the first sequence
+ of all-zero 16-bit chunks is replaced by ::. Single
+ all-zero 16-bit chunks are not compressed. The canonical
+ format uses lowercase characters and leading zeros are
+ not allowed. The canonical format for the zone index is
+ the numerical format as described in RFC 4007, Section
+ 11.2.";
+ reference
+ "RFC 4291: IP Version 6 Addressing Architecture
+ RFC 4007: IPv6 Scoped Address Architecture
+ RFC 5952: A Recommendation for IPv6 Address Text Representation";
+ }
+
+ typedef ip-prefix {
+ type union {
+ type inet:ipv4-prefix;
+ type inet:ipv6-prefix;
+ }
+ description
+ "The ip-prefix type represents an IP prefix and is IP
+ version neutral. The format of the textual representations
+ implies the IP version.";
+ }
+
+ typedef ipv4-prefix {
+ type string {
+ pattern
+ '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
+ + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'
+ + '/(([0-9])|([1-2][0-9])|(3[0-2]))';
+ }
+ description
+ "The ipv4-prefix type represents an IPv4 address prefix.
+ The prefix length is given by the number following the
+ slash character and must be less than or equal to 32.
+
+ A prefix length value of n corresponds to an IP address
+ mask that has n contiguous 1-bits from the most
+ significant bit (MSB) and all other bits set to 0.
+
+ The canonical format of an IPv4 prefix has all bits of
+ the IPv4 address set to zero that are not part of the
+ IPv4 prefix.";
+ }
+
+ typedef ipv6-prefix {
+ type string {
+ pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
+ + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
+ + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}'
+ + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'
+ + '(/(([0-9])|([0-9]{2})|(1[0-1][0-9])|(12[0-8])))';
+ pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
+ + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'
+ + '(/.+)';
+ }
+ description
+ "The ipv6-prefix type represents an IPv6 address prefix.
+ The prefix length is given by the number following the
+ slash character and must be less than or equal 128.
+
+ A prefix length value of n corresponds to an IP address
+ mask that has n contiguous 1-bits from the most
+ significant bit (MSB) and all other bits set to 0.
+
+ The IPv6 address should have all bits that do not belong
+ to the prefix set to zero.
+
+ The canonical format of an IPv6 prefix has all bits of
+ the IPv6 address set to zero that are not part of the
+ IPv6 prefix. Furthermore, IPv6 address is represented
+ in the compressed format described in RFC 4291, Section
+ 2.2, item 2 with the following additional rules: the ::
+ substitution must be applied to the longest sequence of
+ all-zero 16-bit chunks in an IPv6 address. If there is
+ a tie, the first sequence of all-zero 16-bit chunks is
+ replaced by ::. Single all-zero 16-bit chunks are not
+ compressed. The canonical format uses lowercase
+ characters and leading zeros are not allowed.";
+ reference
+ "RFC 4291: IP Version 6 Addressing Architecture";
+ }
+
+ /*** collection of domain name and URI types ***/
+
+ typedef domain-name {
+ type string {
+ pattern '((([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.)*'
+ + '([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.?)'
+ + '|\.';
+ length "1..253";
+ }
+ description
+ "The domain-name type represents a DNS domain name. The
+ name SHOULD be fully qualified whenever possible.
+
+ Internet domain names are only loosely specified. Section
+ 3.5 of RFC 1034 recommends a syntax (modified in Section
+ 2.1 of RFC 1123). The pattern above is intended to allow
+ for current practice in domain name use, and some possible
+ future expansion. It is designed to hold various types of
+ domain names, including names used for A or AAAA records
+ (host names) and other records, such as SRV records. Note
+ that Internet host names have a stricter syntax (described
+ in RFC 952) than the DNS recommendations in RFCs 1034 and
+ 1123, and that systems that want to store host names in
+ schema nodes using the domain-name type are recommended to
+ adhere to this stricter standard to ensure interoperability.
+
+ The encoding of DNS names in the DNS protocol is limited
+ to 255 characters. Since the encoding consists of labels
+ prefixed by a length bytes and there is a trailing NULL
+ byte, only 253 characters can appear in the textual dotted
+ notation.
+
+ The description clause of schema nodes using the domain-name
+ type MUST describe when and how these names are resolved to
+ IP addresses. Note that the resolution of a domain-name value
+ may require to query multiple DNS records (e.g., A for IPv4
+ and AAAA for IPv6). The order of the resolution process and
+ which DNS record takes precedence can either be defined
+ explicitely or it may depend on the configuration of the
+ resolver.
+
+ Domain-name values use the US-ASCII encoding. Their canonical
+ format uses lowercase US-ASCII characters. Internationalized
+ domain names MUST be encoded in punycode as described in RFC
+ 3492";
+ reference
+ "RFC 952: DoD Internet Host Table Specification
+ RFC 1034: Domain Names - Concepts and Facilities
+ RFC 1123: Requirements for Internet Hosts -- Application
+ and Support
+ RFC 2782: A DNS RR for specifying the location of services
+ (DNS SRV)
+ RFC 3492: Punycode: A Bootstring encoding of Unicode for
+ Internationalized Domain Names in Applications
+ (IDNA)
+ RFC 5891: Internationalizing Domain Names in Applications
+ (IDNA): Protocol";
+ }
+
+ typedef host {
+ type union {
+ type inet:ip-address;
+ type inet:domain-name;
+ }
+ description
+ "The host type represents either an IP address or a DNS
+ domain name.";
+ }
+
+ typedef uri {
+ type string;
+ description
+ "The uri type represents a Uniform Resource Identifier
+ (URI) as defined by STD 66.
+
+ Objects using the uri type MUST be in US-ASCII encoding,
+ and MUST be normalized as described by RFC 3986 Sections
+ 6.2.1, 6.2.2.1, and 6.2.2.2. All unnecessary
+ percent-encoding is removed, and all case-insensitive
+ characters are set to lowercase except for hexadecimal
+ digits, which are normalized to uppercase as described in
+ Section 6.2.2.1.
+
+ The purpose of this normalization is to help provide
+ unique URIs. Note that this normalization is not
+ sufficient to provide uniqueness. Two URIs that are
+ textually distinct after this normalization may still be
+ equivalent.
+
+ Objects using the uri type may restrict the schemes that
+ they permit. For example, 'data:' and 'urn:' schemes
+ might not be appropriate.
+
+ A zero-length URI is not a valid URI. This can be used to
+ express 'URI absent' where required.
+
+ In the value set and its semantics, this type is equivalent
+ to the Uri SMIv2 textual convention defined in RFC 5017.";
+ reference
+ "RFC 3986: Uniform Resource Identifier (URI): Generic Syntax
+ RFC 3305: Report from the Joint W3C/IETF URI Planning Interest
+ Group: Uniform Resource Identifiers (URIs), URLs,
+ and Uniform Resource Names (URNs): Clarifications
+ and Recommendations
+ RFC 5017: MIB Textual Conventions for Uniform Resource
+ Identifiers (URIs)";
+ }
+
+ }
Code Review / controller.git / blobdiff