2 Documentation Perform complex operations on netconf.
4 ... Copyright (c) 2015,2017 Cisco Systems, Inc. and others. All rights reserved.
6 ... This program and the accompanying materials are made available under the
7 ... terms of the Eclipse Public License v1.0 which accompanies this distribution,
8 ... and is available at http://www.eclipse.org/legal/epl-v10.html
11 ... This library encapsulates a bunch of somewhat complex and commonly used
12 ... netconf operations into reusable keywords to make writing netconf
13 ... test suites easier.
15 ... TODO: RemoteBash.robot contains logic which could be reused here.
18 Library RequestsLibrary
20 Resource NexusKeywords.robot
21 Resource SSHKeywords.robot
22 Resource TemplatedRequests.robot
24 Resource RemoteBash.robot
28 ${TESTTOOL_DEFAULT_JAVA_OPTIONS} -Xmx${MAX_HEAP}
29 ${DIRECTORY_WITH_DEVICE_TEMPLATES} ${CURDIR}/../variables/netconf/device
30 ${FIRST_TESTTOOL_PORT} 17830
31 ${BASE_NETCONF_DEVICE_PORT} 17830
32 ${DEVICE_NAME_BASE} netconf-scaling-device
33 ${TESTTOOL_BOOT_TIMEOUT} 60s
34 ${ENABLE_NETCONF_TEST_TIMEOUT} ${ENABLE_GLOBAL_TEST_DEADLINES}
38 [Arguments] ${create_session_for_templated_requests}=True
39 [Documentation] Setup the environment for the other keywords of this Resource to work properly.
40 ${tmp}= BuiltIn.Create_Dictionary
41 BuiltIn.Set_Suite_Variable ${NetconfKeywords__mounted_device_types} ${tmp}
42 BuiltIn.Run_Keyword_If ${create_session_for_templated_requests} TemplatedRequests.Create_Default_Session timeout=2
43 NexusKeywords.Initialize_Artifact_Deployment_And_Usage
45 Configure_Device_In_Netconf
46 [Arguments] ${device_name} ${device_type}=default ${device_port}=${FIRST_TESTTOOL_PORT} ${device_address}=${TOOLS_SYSTEM_IP} ${device_user}=admin ${device_password}=topsecret
47 ... ${device_key}=device-key ${session}=default ${schema_directory}=/tmp/schema ${http_timeout}=${EMPTY} ${http_method}=put
48 [Documentation] Tell Netconf about the specified device so it can add it into its configuration.
49 ${mapping}= BuiltIn.Create_dictionary DEVICE_IP=${device_address} DEVICE_NAME=${device_name} DEVICE_PORT=${device_port} DEVICE_USER=${device_user} DEVICE_PASSWORD=${device_password}
50 ... DEVICE_KEY=${device_key} SCHEMA_DIRECTORY=${schema_directory}
51 # TODO: Is it possible to use &{kwargs} as a mapping directly?
52 Run Keyword if '${http_method}'=='post' TemplatedRequests.Post_As_Xml_Templated folder=${DIRECTORY_WITH_DEVICE_TEMPLATES}${/}${device_type} mapping=${mapping} session=${session} http_timeout=${http_timeout}
53 ... ELSE TemplatedRequests.Put_As_Xml_Templated folder=${DIRECTORY_WITH_DEVICE_TEMPLATES}${/}${device_type} mapping=${mapping} session=${session} http_timeout=${http_timeout}
54 Collections.Set_To_Dictionary ${NetconfKeywords__mounted_device_types} ${device_name} ${device_type}
56 Count_Netconf_Connectors_For_Device
57 [Arguments] ${device_name} ${session}=default
58 [Documentation] Count all instances of the specified device in the Netconf topology (usually 0 or 1).
59 # FIXME: This no longer counts netconf connectors, it counts "device instances in Netconf topology".
60 # This keyword should be renamed but without an automatic keyword naming standards checker this is
61 # potentially destabilizing change so right now it is as FIXME. Proposed new name:
62 # Count_Device_Instances_In_Netconf_Topology
63 ${mounts}= TemplatedRequests.Get_As_Json_From_Uri ${OPERATIONAL_API}/network-topology:network-topology/topology/topology-netconf session=${session}
65 ${actual_count}= Builtin.Evaluate len('''${mounts}'''.split('"node-id": "${device_name}"'))-1
66 Builtin.Return_From_Keyword ${actual_count}
68 Check_Device_Has_No_Netconf_Connector
69 [Arguments] ${device_name} ${session}=default
70 [Documentation] Check that there are no instances of the specified device in the Netconf topology.
71 # FIXME: Similarlt to "Count_Netconf_Connectors_For_Device", this does not check whether the device has
72 # no netconf connector but whether the device is present in the netconf topology or not. Rename, proposed
73 # new name: Check_Device_Not_Present_In_Netconf_Topology
74 ${count} Count_Netconf_Connectors_For_Device ${device_name} session=${session}
75 Builtin.Should_Be_Equal_As_Strings ${count} 0
77 Check_Device_Completely_Gone
78 [Arguments] ${device_name} ${session}=default
79 [Documentation] Check that the specified device has no Netconf connectors nor associated data.
80 Check_Device_Has_No_Netconf_Connector ${device_name} session=${session}
81 ${uri}= Builtin.Set_Variable ${CONFIG_API}/network-topology:network-topology/topology/topology-netconf/node/${device_name}
82 ${status} ${response}= BuiltIn.Run_Keyword_And_Ignore_Error TemplatedRequests.Get_As_Xml_From_Uri ${uri} session=${session}
83 BuiltIn.Should_Be_Equal_As_Strings ${status} FAIL
84 BuiltIn.Should_Contain ${response} 404
86 Check_Device_Connected
87 [Arguments] ${device_name} ${session}=default
88 [Documentation] Check that the specified device is accessible from Netconf.
89 ${device_status}= TemplatedRequests.Get_As_Json_From_Uri ${OPERATIONAL_API}/network-topology:network-topology/topology/topology-netconf/node/${device_name} session=${session}
90 Builtin.Should_Contain ${device_status} "netconf-node-topology:connection-status": "connected"
93 [Arguments] ${device_name} ${timeout}=20s ${period}=1s ${session}=default
94 [Documentation] Wait for the device to become connected.
95 ... It is more readable to use this keyword in a test case than to put the whole WUKS below into it.
96 BuiltIn.Wait_Until_Keyword_Succeeds ${timeout} ${period} Check_Device_Connected ${device_name} session=${session}
98 Remove_Device_From_Netconf
99 [Arguments] ${device_name} ${session}=default ${location}=location
100 [Documentation] Tell Netconf to deconfigure the specified device
101 ${device_type}= Collections.Pop_From_Dictionary ${NetconfKeywords__mounted_device_types} ${device_name}
102 ${template_as_string}= BuiltIn.Set_Variable {'DEVICE_NAME': '${device_name}'}
103 TemplatedRequests.Delete_Templated ${DIRECTORY_WITH_DEVICE_TEMPLATES}${/}${device_type} ${template_as_string} session=${session} location=${location}
105 Wait_Device_Fully_Removed
106 [Arguments] ${device_name} ${timeout}=10s ${period}=1s ${session}=default
107 [Documentation] Wait until all netconf connectors for the device with the given name disappear.
108 ... Call of Remove_Device_From_Netconf returns before netconf gets
109 ... around deleting the device's connector. To ensure the device is
110 ... really gone from netconf, use this keyword to make sure all
111 ... connectors disappear. If a call to Remove_Device_From_Netconf
112 ... is not made before using this keyword, the wait will fail.
113 ... Using this keyword is more readable than putting the WUKS below
114 ... into a test case.
115 BuiltIn.Wait_Until_Keyword_Succeeds ${timeout} ${period} Check_Device_Completely_Gone ${device_name} session=${session}
117 NetconfKeywords__Deploy_Additional_Schemas
118 [Arguments] ${schemas}
119 [Documentation] Internal keyword for Install_And_Start_TestTool
120 ... This deploys the additional schemas if any and returns a
121 ... command line argument to be added to the testtool commandline
122 ... to tell it to load them. While this code could be integrated
123 ... into its only user, I considered the resulting code to be too
124 ... unreadable as the actions are quite different in the two
125 ... possibilities (additional schemas present versus no additional
126 ... schemas present), therefore a separate keyword is used.
127 # Make sure there is no schemas directory on the remote machine. A
128 # previous test suite might have left some debris there and that might
129 # lead to spurious failures, so it is better to make sure we start with a
130 # clean slate. Additionally when the caller did not specify any
131 # additional schemas for testtool, we want to make extra sure none are
133 ${response}= SSHLibrary.Execute_Command rm -rf schemas 2>&1
134 BuiltIn.Log ${response}
135 # Drop out of the keyword, returning no command line argument when there
136 # are no additional schemas to deploy.
137 BuiltIn.Return_From_Keyword_If '${schemas}' == 'none' ${EMPTY}
138 # Deploy the additional schemas into a standard directory on the remote
139 # machine and construct a command line argument pointing to that
140 # directory from the point of view of the process running on that
142 SSHLibrary.Put_Directory ${schemas} destination=./schemas
143 SSHLibrary.List_Directory ./schemas
144 [Return] --schemas-dir ./schemas
146 NetconfKeywords__Deploy_Custom_RPC
147 [Arguments] ${rpc_config}
148 [Documentation] Internal keyword for Install_And_Start_TestTool
149 ... This deploys the optional custom rpc file.
150 ... Drop out of the keyword, returning no command line argument when there
151 ... is no rpc file to deploy.
152 BuiltIn.Return_From_Keyword_If '${rpc_config}' == 'none' ${EMPTY}
153 SSHKeywords.Copy_File_To_Tools_System ${TOOLS_SYSTEM_1_IP} ${rpc_config} /tmp
154 [Return] --rpc-config /tmp/customaction.xml
156 NetconfKeywords__Check_Device_Is_Up
157 [Arguments] ${last-port}
158 ${count}= SSHKeywords.Count_Port_Occurences ${last-port} LISTEN java
159 BuiltIn.Should_Be_Equal_As_Integers ${count} 1
161 NetconfKeywords__Wait_Device_Is_Up_And_Running
162 [Arguments] ${device_name}
163 ${number}= BuiltIn.Evaluate '${device_name}'.split('-').pop()
164 BuiltIn.Wait_Until_Keyword_Succeeds ${TESTTOOL_BOOT_TIMEOUT} 1s Check_Device_Up_And_Running ${number}
166 Install_And_Start_Testtool
167 [Arguments] ${device-count}=10 ${debug}=true ${schemas}=none ${rpc_config}=none ${tool_options}=${EMPTY} ${java_options}=${TESTTOOL_DEFAULT_JAVA_OPTIONS}
169 [Documentation] Install and run testtool.
170 ${filename}= NexusKeywords.Deploy_Test_Tool netconf netconf-testtool
171 Start_Testtool ${filename} ${device-count} ${debug} ${schemas} ${rpc_config} ${tool_options}
172 ... ${java_options} ${mdsal}
175 [Arguments] ${filename} ${device-count}=10 ${debug}=true ${schemas}=none ${rpc_config}=none ${tool_options}=${EMPTY}
176 ... ${java_options}=${TESTTOOL_DEFAULT_JAVA_OPTIONS} ${mdsal}=true
177 [Documentation] Arrange to collect tool's output into a log file.
178 ... Will use specific ${schemas} unless argument resolves to 'none',
179 ... which signifies that there are no additional schemas to be deployed.
180 ... If so the directory for the additional schemas is deleted on the
181 ... remote machine and the additional schemas argument is left out.
182 ${schemas_option}= NetconfKeywords__Deploy_Additional_Schemas ${schemas}
183 ${rpc_config_option}= NetconfKeywords__Deploy_Custom_RPC ${rpc_config}
184 ${command}= NexusKeywords.Compose_Full_Java_Command ${java_options} -jar ${filename} ${tool_options} --device-count ${device-count} --debug ${debug} ${schemas_option} ${rpc_config_option} --md-sal ${mdsal}
185 BuiltIn.Log Running testtool: ${command}
186 ${logfile}= Utils.Get_Log_File_Name testtool
187 BuiltIn.Set_Suite_Variable ${testtool_log} ${logfile}
188 SSHLibrary.Write ${command} >${logfile} 2>&1
189 # Store information needed by other keywords.
190 BuiltIn.Set_Suite_Variable ${NetconfKeywords__testtool_device_count} ${device-count}
191 # Wait for the testtool to boot up.
192 Perform_Operation_On_Each_Device NetconfKeywords__Wait_Device_Is_Up_And_Running
194 Check_Device_Up_And_Running
195 [Arguments] ${device-number}
196 [Documentation] Query netstat on remote machine whether testtool device with the specified number has its port open and fail if not.
197 ${device-port}= BuiltIn.Evaluate ${FIRST_TESTTOOL_PORT}+${device-number}-1
198 NetconfKeywords__Check_Device_Is_Up ${device-port}
201 [Documentation] Stop testtool and download its log.
202 RemoteBash.Write_Bare_Ctrl_C
203 SSHLibrary.Read_Until_Prompt
204 # TODO: Unify with play.py and pcc-mock handling.
205 # TODO: Maybe this keyword's content shall be moved into SSHUtils and named somewhat like
206 # "Interrupt_Program_And_Download_Its_Log" which will get an argument stating the name of
207 # the log file to get.
208 SSHLibrary.Get_File ${testtool_log}
210 NetconfKeywords__Check_Netconf_Test_Timeout_Not_Expired
211 [Arguments] ${deadline_Date}
212 BuiltIn.Return_From_Keyword_If not ${ENABLE_NETCONF_TEST_TIMEOUT}
213 ${current_Date}= DateTime.Get_Current_Date
214 ${ellapsed_seconds}= DateTime.Subtract_Date_From_Date ${deadline_Date} ${current_Date}
215 BuiltIn.Run_Keyword_If ${ellapsed_seconds}<0 Fail The global time out period expired
217 NetconfKeywords__Perform_Operation_With_Checking_On_Next_Device
218 [Arguments] ${operation} ${deadline_Date}
219 NetconfKeywords__Check_Netconf_Test_Timeout_Not_Expired ${deadline_Date}
220 ${number}= BuiltIn.Evaluate ${current_port}-${BASE_NETCONF_DEVICE_PORT}+1
221 BuiltIn.Run_Keyword ${operation} ${DEVICE_NAME_BASE}-${number}
222 ${next}= BuiltIn.Evaluate ${current_port}+1
223 BuiltIn.Set_Suite_Variable ${current_port} ${next}
225 Perform_Operation_On_Each_Device
226 [Arguments] ${operation} ${count}=${NetconfKeywords__testtool_device_count} ${timeout}=30m
227 ${current_Date}= DateTime.Get_Current_Date
228 ${deadline_Date}= DateTime.Add_Time_To_Date ${current_Date} ${timeout}
229 BuiltIn.Set_Suite_Variable ${current_port} ${BASE_NETCONF_DEVICE_PORT}
230 BuiltIn.Repeat_Keyword ${count} times NetconfKeywords__Perform_Operation_With_Checking_On_Next_Device ${operation} ${deadline_Date}