2 Documentation BGP performance of ingesting from many iBGP rrc peers, iBGPs receive updates.
4 ... Copyright (c) 2016 Cisco Systems, Inc. and others. All rights reserved.
6 ... This program and the accompanying materials are made available under the
7 ... terms of the Eclipse Public License v1.0 which accompanies this distribution,
8 ... and is available at http://www.eclipse.org/legal/epl-v10.html
10 ... This suite uses play.py processes as iBGP rrc peers.
11 ... This is analogue of single peer performance suite, which uses many peers.
12 ... Each peer is of ibgp rrc type, and they contribute to the same example-bgp-rib,
13 ... and thus to the same single example-ipv4-topology.
14 ... The suite looks at example-ipv4-topology and checks BGP peers log for received updates.
16 ... ODL distinguishes peers by their IP addresses.
17 ... Currently, this suite requires python utils to be started on ODL System,
18 ... to guarantee IP address block is available for them to bind to.
20 ... Brief description how to configure BGP peer can be found here:
21 ... https://wiki.opendaylight.org/view/BGP_LS_PCEP:User_Guide#BGP_Peer
22 ... http://docs.opendaylight.org/en/stable-boron/user-guide/bgp-user-guide.html#bgp-peering
23 Suite Setup Setup_Everything
24 Suite Teardown Teardown_Everything
25 Test Setup SetupUtils.Setup_Test_With_Logging_And_Fast_Failing
26 Test Teardown SetupUtils.Teardown_Test_Show_Bugs_And_Start_Fast_Failing_If_Test_Failed
28 Library RequestsLibrary
29 Library SSHLibrary timeout=10s
30 Resource ../../../libraries/BGPSpeaker.robot
31 Resource ../../../libraries/FailFast.robot
32 Resource ../../../libraries/KarafKeywords.robot
33 Resource ../../../libraries/KillPythonTool.robot
34 Resource ../../../libraries/PrefixCounting.robot
35 Resource ../../../libraries/SetupUtils.robot
36 Resource ../../../libraries/SSHKeywords.robot
37 Resource ../../../libraries/TemplatedRequests.robot
38 Resource ../../../libraries/Utils.robot
39 Resource ../../../variables/Variables.robot
42 ${BGP_TOOL_LOG_LEVEL} info
43 ${BGP_PEERS_LOG_FILE_NAME} bgp_peer.log
44 ${BGP_VARIABLES_FOLDER} ${CURDIR}/../../../variables/bgpuser/
45 ${CHECK_PERIOD_PREFIX_COUNT_MANY_RRC} 60
46 ${COUNT} 300000 # With AdjRibsOut, the amount of data present is on the same scale as 600k ingest with single peer.
47 ${COUNT_PREFIX_COUNT_MANY_RRC} ${COUNT}
48 ${FIRST_PEER_IP} 127.0.0.1
50 ${HOLDTIME_PREFIX_COUNT_MANY_RRC} ${HOLDTIME}
51 ${KARAF_LOG_LEVEL} INFO
52 ${KARAF_BGPCEP_LOG_LEVEL} ${KARAF_LOG_LEVEL}
53 ${KARAF_PROTOCOL_LOG_LEVEL} ${KARAF_BGPCEP_LOG_LEVEL}
54 ${MULTIPLICITY_PREFIX_COUNT_MANY_RRC} 2
55 ${REPETITIONS_PREFIX_COUNT_MANY_RRC} 2
56 ${TEST_DURATION_MULTIPLIER} 1
57 ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT_MANY_RRC} ${TEST_DURATION_MULTIPLIER}
58 ${RIB_INSTANCE} example-bgp-rib
59 ${PROTOCOL_OPENCONFIG} ${RIB_INSTANCE}
60 ${DEVICE_NAME} controller-config
63 Check_For_Empty_Ipv4_Topology_Before_Talking
64 [Documentation] Wait for example-ipv4-topology to come up and empty. Give large timeout for case when BGP boots slower than restconf.
66 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
67 BuiltIn.Wait_Until_Keyword_Succeeds 120s 1s PrefixCounting.Check_Ipv4_Topology_Is_Empty
69 Reconfigure_ODL_To_Accept_Connections
70 [Documentation] Configure BGP peer modules with initiate-connection set to false.
71 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
72 FOR ${index} IN RANGE 1 ${MULTIPLICITY_PREFIX_COUNT_MANY_RRC}+1
73 ${peer_name} = BuiltIn.Set_Variable example-bgp-peer-${index}
74 ${peer_ip} = BuiltIn.Evaluate str(ipaddr.IPAddress('${FIRST_PEER_IP}') + ${index} - 1) modules=ipaddr
75 &{mapping} BuiltIn.Create_Dictionary DEVICE_NAME=${DEVICE_NAME} NAME=${peer_name} IP=${peer_ip} HOLDTIME=${HOLDTIME_PREFIX_COUNT_MANY_RRC}
76 ... PEER_PORT=${BGP_TOOL_PORT} PEER_ROLE=rr-client INITIATE=false BGP_RIB=${RIB_INSTANCE} PASSIVE_MODE=true
77 ... BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG} RIB_INSTANCE_NAME=${RIB_INSTANCE} RR_CLIENT=true
78 TemplatedRequests.Put_As_Xml_Templated ${BGP_VARIABLES_FOLDER}${/}ibgp_peers mapping=${mapping}
81 Start_Talking_BGP_Manager
82 [Documentation] Start Python manager to connect speakers to ODL.
83 BGPSpeaker.Start_BGP_Manager --amount=${COUNT_PREFIX_COUNT_MANY_RRC} --multiplicity=${MULTIPLICITY_PREFIX_COUNT_MANY_RRC} --myip=${FIRST_PEER_IP} --myport=${BGP_TOOL_PORT} --peerip=${ODL_SYSTEM_IP} --peerport=${ODL_BGP_PORT} --logfile=${BGP_PEERS_LOG_FILE_NAME} --${BGP_TOOL_LOG_LEVEL}
85 Wait_For_Ipv4_Topology
86 [Documentation] Wait until example-ipv4-topology reaches the target prefix count.
88 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
89 BuiltIn.Log max. ${bgp_filling_timeout}s console=yes
90 Init_Check_Ipv4_Topology_Keyword ${COUNT_PREFIX_COUNT_MANY_RRC} ${REPETITIONS_PREFIX_COUNT_MANY_RRC}
91 ${message}= BuiltIn.Wait_Until_Keyword_Succeeds ${bgp_filling_timeout} ${CHECK_PERIOD_PREFIX_COUNT_MANY_RRC} Check_Ipv4_Topology
92 BuiltIn.Should_Be_Equal_As_Strings ${message} Target value reached.
94 Check_Logs_For_Updates
95 [Documentation] Check BGP peer logs for received updates.
97 ${timeout} = BuiltIn.Set_Variable ${bgp_filling_timeout}
98 FOR ${index} IN RANGE 1 ${MULTIPLICITY_PREFIX_COUNT_MANY_RRC}+1
99 ${bgp_peer_label} = BuiltIn.Set_Variable BGP-Dummy-${index}
100 ${expected_prefixcount} = BuiltIn.Evaluate ${COUNT_PREFIX_COUNT_MANY_RRC} - ${COUNT_PREFIX_COUNT_MANY_RRC} / ${MULTIPLICITY_PREFIX_COUNT_MANY_RRC}
101 ${expected_string} = BuiltIn.Set_Variable total_received_nlri_prefix_counter: ${expected_prefixcount}
102 BuiltIn.Wait_Until_Keyword_Succeeds ${timeout} 1s Check_File_For_Occurence ${BGP_PEERS_LOG_FILE_NAME} ${bgp_peer_label}
103 ... ${expected_string} 2
104 ${timeout} = BuiltIn.Set_Variable 20s
105 # FIXME: Calculation of ${expected_prefixcount} correct just when the ${COUNT_PREFIX_COUNT_MANY_RRC} is a multiplication of ${MULTIPLICITY_PREFIX_COUNT_MANY_RRC}
108 Kill_Talking_BGP_Speakers
109 [Documentation] Abort the Python speakers. Also, attempt to stop failing fast.
111 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
112 BGPSpeaker.Kill_BGP_Speaker
113 FailFast.Do_Not_Fail_Fast_From_Now_On
114 # NOTE: It is still possible to remain failing fast, if both previous and this test have failed.
115 [Teardown] FailFast.Do_Not_Start_Failing_If_This_Failed
117 Wait_For_Stable_Ipv4_Topology_After_Talking
118 [Documentation] Wait until example-ipv4-topology becomes stable again.
120 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
121 PrefixCounting.Wait_For_Ipv4_Topology_Prefixes_To_Become_Stable timeout=${bgp_emptying_timeout} period=${CHECK_PERIOD_PREFIX_COUNT_MANY_RRC} repetitions=${REPETITIONS_PREFIX_COUNT_MANY_RRC} excluded_count=${COUNT_PREFIX_COUNT_MANY_RRC}
123 Check_For_Empty_Ipv4_Topology_After_Talking
124 [Documentation] Example-ipv4-topology should be empty now.
126 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
127 PrefixCounting.Check_Ipv4_Topology_Is_Empty
129 Delete_Bgp_Peer_Configuration
130 [Documentation] Revert the BGP configuration to the original state: without any configured peers.
132 [Setup] SetupUtils.Setup_Test_With_Logging_And_Without_Fast_Failing
133 FOR ${index} IN RANGE 1 ${MULTIPLICITY_PREFIX_COUNT_MANY_RRC}+1
134 ${peer_name} = BuiltIn.Set_Variable example-bgp-peer-${index}
135 ${peer_ip} = BuiltIn.Evaluate str(ipaddr.IPAddress('${FIRST_PEER_IP}') + ${index} - 1) modules=ipaddr
136 &{mapping} BuiltIn.Create_Dictionary DEVICE_NAME=${DEVICE_NAME} NAME=${peer_name} IP=${peer_ip} BGP_RIB_OPENCONFIG=${PROTOCOL_OPENCONFIG}
137 TemplatedRequests.Delete_Templated ${BGP_VARIABLES_FOLDER}${/}ibgp_peers mapping=${mapping}
142 [Documentation] Setup imported resources, SSH-login to ODL system,
143 ... create HTTP session, put Python tool to ODL system.
144 SetupUtils.Setup_Utils_For_Setup_And_Teardown
145 TemplatedRequests.Create_Default_Session
146 PrefixCounting.PC_Setup
147 RequestsLibrary.Create_Session operational http://${ODL_SYSTEM_IP}:${RESTCONFPORT} auth=${AUTH} timeout=125 max_retries=0
148 # TODO: Do not include slash in ${OPERATIONAL_TOPO_API}, having it typed here is more readable.
149 # TODO: Alternatively, create variable in Variables which starts with http.
150 # Both TODOs would probably need to update every suite relying on current Variables.
151 SSHLibrary.Set_Default_Configuration prompt=${ODL_SYSTEM_PROMPT}
152 SSHLibrary.Open_Connection ${ODL_SYSTEM_IP}
153 SSHKeywords.Flexible_Controller_Login
154 SSHKeywords.Require_Python
155 SSHKeywords.Assure_Library_Ipaddr target_dir=.
156 SSHLibrary.Put_File ${CURDIR}/../../../../tools/fastbgp/play.py
157 # Calculate the timeout value based on how many routes are going to be pushed.
158 ${period} = DateTime.Convert_Time ${CHECK_PERIOD_PREFIX_COUNT_MANY_RRC} result_format=number
159 ${timeout} = BuiltIn.Evaluate ${MULTIPLICITY_PREFIX_COUNT_MANY_RRC} * ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT_MANY_RRC} * (${COUNT_PREFIX_COUNT_MANY_RRC} * 6.0 / 10000 + ${period} * (${REPETITIONS_PREFIX_COUNT_MANY_RRC} + 1)) + 20
160 Builtin.Set_Suite_Variable ${bgp_filling_timeout} ${timeout}
161 ${timeout} = BuiltIn.Evaluate ${TEST_DURATION_MULTIPLIER_PREFIX_COUNT_MANY_RRC} * (${COUNT_PREFIX_COUNT_MANY_RRC} * 2.0 / 10000 + ${period} * (${REPETITIONS_PREFIX_COUNT_MANY_RRC} + 1)) + 20
162 Builtin.Set_Suite_Variable ${bgp_emptying_timeout} ${timeout}
163 KarafKeywords.Execute_Controller_Karaf_Command_On_Background log:set ${KARAF_LOG_LEVEL}
166 [Documentation] Make sure Python tool was killed and tear down imported Resources.
167 # Environment issue may have dropped the SSH connection, but we do not want Teardown to fail.
168 BuiltIn.Run_Keyword_And_Ignore_Error KillPythonTool.Search_And_Kill_Remote_Python 'play\.py'
169 BuiltIn.Run_Keyword_And_Ignore_Error Utils.Get_Sysstat_Statistics
170 RequestsLibrary.Delete_All_Sessions
171 SSHLibrary.Close_All_Connections
173 Init_Check_Ipv4_Topology_Keyword
174 [Arguments] ${expected_count}=0 ${deadlock_cycles}=-1
175 [Documentation] Initialise test variables for Check_Ipv4_Topology keyword.
176 ${deadlock_cycles}= Convert To Integer ${deadlock_cycles}
177 BuiltIn.Set_Test_Variable ${deadlock_cycles}
178 BuiltIn.Set_Test_Variable ${ipv4_topology_deadlock_countdown} ${deadlock_cycles}
179 BuiltIn.Set_Test_Variable ${expected_count}
180 BuiltIn.Set_Test_Variable ${ipv4_topology_last_count} -1
183 [Documentation] Check and log the IPv4 topology count. PASS if ${expected_count} or ${actual_count} not changed for ${deadlock_cycles} keyword calls.
184 ${actual_count} = PrefixCounting.Get_Ipv4_Topology_Count
185 ${ipv4_topology_deadlock_countdown}= BuiltIn.Set_Variable_If (${actual_count} == ${ipv4_topology_last_count}) and (${ipv4_topology_deadlock_countdown} >= 0) ${ipv4_topology_deadlock_countdown - 1} ${deadlock_cycles}
186 ${hour} ${min} ${sec} = BuiltIn.Get_Time hour min sec
187 BuiltIn.Set_Test_Variable ${ipv4_topology_deadlock_countdown}
188 BuiltIn.Set_Test_Variable ${ipv4_topology_last_count} ${actual_count}
189 BuiltIn.Log ${hour}:${min}:${sec} actual/expected prefix count is ${actual_count}/${expected_count} (countdown:${ipv4_topology_deadlock_countdown}) console=yes
190 BuiltIn.Return_From_Keyword_If ${ipv4_topology_deadlock_countdown} == 0 Deadlock detected (ipv4-topology not changed for ${deadlock_cycles} cycles)
191 BuiltIn.Should_Be_Equal_As_Integers ${actual_count} ${expected_count}
192 [Return] Target value reached.
194 Check_File_For_Occurence
195 [Arguments] ${file_name} ${keyword} ${value}='' ${threshold}=1
196 [Documentation] Check file for ${keyword} or ${keyword} ${value} pair and returns number of occurences
197 ${output_log}= SSHLibrary.Execute_Command grep '${keyword}' '${file_name}' | grep -c '${value}'
198 ${count}= Convert To Integer ${output_log}
199 BuiltIn.Should_Be_True ${count} >= ${threshold}